A Cognitive Femtocell can be defined as a cognitive radio (CR) enabled Femtocell. The concept of Cognitive Femtocell is becoming a promising approach to enabling multi-tiered opportunistic access in next generation cellular broadband wireless systems. Regarding to finding the spectrum opportunities in Cognitive Femtocell Networks, there are numerous sensing methods that can be applied depending on the system requirements and network architecture. For example local sensing could be used in Femtocell base stations, or exchanged sensing data of neighbours could also be used. Moreover, sensing could be conducted synchronously in the network, or each component could perform sensing on its own schedule.
This project requires you to understand the cognitive femcell concept and propose a new approach to the cognitive femtocell in LTE.
• Required Knowledge:Wireless communication, Signal processing
• Recommended Tools/Language:Matlab
•Project type:Software
Main tasks:
• An in-depth understanding of femtocell.
• Design a simulation of a femtocell for 3GPP LTE in Matlab.
• Verify the model with the existing results.
• Compare the simulation results with the common used Macrocell scenario (without femtocell).
I have read the project introduction in your email. According to it, I think your tasks are mainly to:
1) Read relevent materials about Femtocells expecially Cognitive Femtocells.
2) Investigate thoroughly existing spectrum sensing algorithms in LTE Cognitive Femtocell scenario.
3) Choose one algorithm from previous step that is most suitable to your project, build a simulator according to that and implement the algorithm.
4) Compare your simulation results with the results in the original paper.
5) Improve the algorithm based on your understanding, modify the simulation accordingly, and compare the simulation results with Macrocell Scenario (without Femtocell).
二、设计要求中文解析
I have read the project introduction in your email. According to it, I think your tasks are mainly to:
1) Read relevent materials about Femtocells expecially Cognitive Femtocells.
阅读相关资料，特变是认知家庭基站的相关资料。
2) Investigate thoroughly existing spectrum sensing algorithms in LTE Cognitive Femtocell scenario.
调研关于认知家庭基站在LTE中的算法。
3) Choose one algorithm from previous step that is most suitable to your project, build a simulator according to that and implement the algorithm.
选择一个算法，建立一个仿真环境，然后实现该算法，并进行仿真。
4) Compare your simulation results with the results in the original paper.
对比你的仿真结果和论文中的仿真结果。
5) Improve the algorithm based on your understanding, modify the simulation accordingly, and compare the simulation results with Macrocell Scenario (without Femtocell).
将Femtocell的频谱感知算法和没有家庭基站的仿真进行对比，对比两个算法的算法的仿真性能。
论文所需要的最关键的算法为：existing spectrum sensing algorithms in LTE Cognitive Femtocell scenario
即：Femtocell系统中认知无线电频谱感知算法！
二、设计实现与仿真说明
2.1 仿真准备
根据课题的任务要求，整个课题可以分为三个部分：
第一：资料的研究；
第二：对论文中所提算法的仿真，这个部分将使用MATLAB进行仿真；
第三：对femtocell的算法和没有femtocell的macrocell的原算法进行对比。
在进行仿真分析之前，首先简单的说明一下femtocell的频谱感知模型，
因此，Femtocell进行频谱感知的目的就是检测出哪些信道被干扰范围之内的宏系统用户所应用，从而避开这些信道。检测的方法主要是通过检测在上行信道接收到的宏系统用户的能量来判断其是否处于Femtocell系统的干扰范围之内。
通常，频谱感知技术的基本结构模型如下所示：
图中，空心三角形为宏基站，实心三角形为fetmo基站，小的空心圆为宏用户，实心圆为femto用户。
2.2 仿真要点
这里，主要防止系统的pd曲线，pf曲线，pm曲线。
2.1 不带Femtocell的频谱感知算法仿真分析
即对普通情况下，即不考虑存在femto的情况，对小区进行频谱感知技术的仿真与分析。
2.2 基于Femtocell的频谱感知算法的仿真
