安装traitlets
首先记得查看自己的python版本,以python3.7为分界线。
python3.7以下用traitlets 4.x;
pip3 install traitlets==4.3.3
python3.7以上才可以用traitlets 5.x
pip3 install traitlets
traitlets的历史版本https://pypi.org/project/traitlets/#history
安装Jetcam
参考官方github的内容https://github.com/NVIDIA-AI-IOT/jetcam
git clone https://github.com/NVIDIA-AI-IOT/jetcam
cd jetcam
sudo python3 setup.py install
使用CSI摄像头
参考官方的内容
from jetcam.csi_camera import CSICamera
camera = CSICamera(capture_device=0, width=224, height=224)
frame = camera.read()
这个变量frame便可以送入opencv进行运算处理了。capture_device不一定等于0,根据你的连接摄像头的端口来。