基础知识

uvm_component有两大特性，一是通过在new的时候指定parent参数来形成一种树形的组织结构，二是有phase的自动执行特点

要用UVM 干活 , 你需要自如的定义和例化 UVM 组件 . 这里是步骤

第 1 步 : 从 uvm_component 类或其子类继承定义你的组件
第 2 步 : 用 uvm_component_utils() 宏注册这个类到 Factory
第 3 步 : 提供 uvm_component 构造器
第 4 步 : 在必要时重写 UVM 的 phase 方法

写UVM Test 的时候 , 我创建了 run_phase() 方法来解释 UVM 会自动调用 run_phase()来启动仿真 . run_phase() 方法是 UVM phase 方法中的一个

所有UVMcomponent都继承了这些phase方法。UVM在所有的component里以设定的顺序调用这些 phase 方法。你可以在你的component里重写这些phase方法，然后UVM会按顺序调用。

UVM按照以下顺序调用 phase 方法

function void build_phase UVM用这个方法自顶向下建立你的验证平台 . 你要在这个方法里例化你的 uvm_component , 如果在别的方法里例化的话 , 你会得到 UVM 的致命报错
function void connect_phase connect phase 把各个模块连接到一起 . 我们会在后面的章节学习连接
function void end_of_elaboration_phase UVM在所有 component 都就位并连接好以后调用这个方法 , 需要在 UVM 层次设定完之后再对验证平台进行调整的话可以用这个 phase.
task run_phase UVM会在各自的线程调用这个 task. 验证平台中的 run_phase() 是同时运行的 , 所以你不知道那个会最先启动
function void report_phase 这个phase 会在最后一个 objection 撤销后运行，然后测试用例就结束了。你可以用来报告结果

tinyalu_pkg.sv

package tinyalu_pkg;
   import uvm_pkg::*;
`include "uvm_macros.svh"
   
      typedef enum bit[2:0] {no_op  = 3'b000,
                          add_op = 3'b001, 
                          and_op = 3'b010,
                          xor_op = 3'b011,
                          mul_op = 3'b100,
                          rst_op = 3'b111} operation_t;

   virtual tinyalu_bfm bfm_g;
   

`include "coverage.svh"
`include  "random_tester.svh"
`include "add_tester.svh"   
`include "scoreboard.svh"
`include "random_test.svh"
`include "add_test.svh"
   
   
endpackage : tinyalu_pkg

tinyalu_bfm.sv(和UVM test那一节一样)

interface tinyalu_bfm;
   import tinyalu_pkg::*;

   byte         unsigned        A;
   byte         unsigned        B;
   bit          clk;
   bit          reset_n;
   wire [2:0]   op;
   bit          start;
   wire done; wire [15:0] result; operation_t op_set; assign op = op_set; task reset_alu(); reset_n = 1'b0; @(negedge clk); @(negedge clk); reset_n = 1'b1; start = 1'b0;  endtask : reset_alu task send_op(input byte iA, input byte iB, input operation_t iop, shortint alu_result); if (iop == rst_op) begin @(negedge clk); op_set = iop; @(posedge clk); reset_n = 1'b0; start = 1'b0; @(posedge clk); #1; reset_n = 1'b1; end else begin @(negedge clk); op_set = iop; A = iA; B = iB; start = 1'b1; if (iop == no_op) begin @(posedge clk); #1; start = 1'b0; end else begin do @(negedge clk); while (done == 0); alu_result = result; start = 1'b0; end end // else: !if(iop == rst_op)  endtask : send_op initial begin clk = 0; forever begin #10; clk = ~clk; end end endinterface : tinyalu_bfm

tb_classes

coverage.svh

class coverage extends uvm_component;
   `uvm_component_utils(coverage)

   virtual tinyalu_bfm bfm;

   byte         unsigned        A;
   byte         unsigned        B;
   operation_t  op_set;

   covergroup op_cov;

      coverpoint op_set {
         bins single_cycle[] = {[add_op : xor_op], rst_op,no_op};
         bins multi_cycle = {mul_op};

         bins opn_rst[] = ([add_op:no_op] => rst_op);
         bins rst_opn[] = (rst_op => [add_op:no_op]);

         bins sngl_mul[] = ([add_op:xor_op],no_op => mul_op);
         bins mul_sngl[] = (mul_op => [add_op:xor_op], no_op);

         bins twoops[] = ([add_op:no_op] [* 2]);
         bins manymult = (mul_op [* 3:5]);


      }

   endgroup

   covergroup zeros_or_ones_on_ops;

      all_ops : coverpoint op_set {
         ignore_bins null_ops = {rst_op, no_op};}

      a_leg: coverpoint A {
         bins zeros = {'h00};
         bins others= {['h01:'hFE]};
         bins ones  = {'hFF};
      }

      b_leg: coverpoint B {
         bins zeros = {'h00};
         bins others= {['h01:'hFE]};
         bins ones  = {'hFF};
      }

      op_00_FF:  cross a_leg, b_leg, all_ops {
         bins add_00 = binsof (all_ops) intersect {add_op} &&
                       (binsof (a_leg.zeros) || binsof (b_leg.zeros));

         bins add_FF = binsof (all_ops) intersect {add_op} &&
                       (binsof (a_leg.ones) || binsof (b_leg.ones));

         bins and_00 = binsof (all_ops) intersect {and_op} &&
                       (binsof (a_leg.zeros) || binsof (b_leg.zeros));

         bins and_FF = binsof (all_ops) intersect {and_op} &&
                       (binsof (a_leg.ones) || binsof (b_leg.ones));

         bins xor_00 = binsof (all_ops) intersect {xor_op} &&
                       (binsof (a_leg.zeros) || binsof (b_leg.zeros));

         bins xor_FF = binsof (all_ops) intersect {xor_op} &&
                       (binsof (a_leg.ones) || binsof (b_leg.ones));

         bins mul_00 = binsof (all_ops) intersect {mul_op} &&
                       (binsof (a_leg.zeros) || binsof (b_leg.zeros));

         bins mul_FF = binsof (all_ops) intersect {mul_op} &&
                       (binsof (a_leg.ones) || binsof (b_leg.ones));

         bins mul_max = binsof (all_ops) intersect {mul_op} &&
                        (binsof (a_leg.ones) && binsof (b_leg.ones));

         ignore_bins others_only =
                                  binsof(a_leg.others) && binsof(b_leg.others);

      }

endgroup
   

   function new (string name, uvm_component parent);
      super.new(name, parent);
      op_cov = new();
      zeros_or_ones_on_ops = new();
   endfunction : new

function void build_phase(uvm_phase phase);

 if(!uvm_config_db #(virtual tinyalu_bfm)::get(null, "*","bfm", bfm))
        $fatal("Failed to get BFM");
endfunction : build_phase

   task run_phase(uvm_phase phase);
      forever begin  : sampling_block
         @(negedge bfm.clk);
         A = bfm.A;
         B = bfm.B;
         op_set = bfm.op_set;
         op_cov.sample();
         zeros_or_ones_on_ops.sample();
      end : sampling_block
   endtask : run_phase
      
endclass : coverage

scoreboard.svh

class scoreboard extends uvm_component;
   `uvm_component_utils(scoreboard);

   virtual tinyalu_bfm bfm;

   function new (string name, uvm_component parent);
      super.new(name, parent);
   endfunction : new

function void build_phase(uvm_phase phase);

 if(!uvm_config_db #(virtual tinyalu_bfm)::get(null, "*","bfm", bfm))
        $fatal("Failed to get BFM");
endfunction : build_phase

   task run_phase(uvm_phase phase);
      shortint predicted_result;
      forever begin : self_checker
         @(posedge bfm.done) 
           case (bfm.op_set)
             add_op: predicted_result = bfm.A + bfm.B;
             and_op: predicted_result = bfm.A & bfm.B;
             xor_op: predicted_result = bfm.A ^ bfm.B;
             mul_op: predicted_result = bfm.A * bfm.B;
           endcase // case (op_set)
         
         if ((bfm.op_set != no_op) && (bfm.op_set != rst_op))
           if (predicted_result != bfm.result)
             $error ("FAILED: A: %0h  B: %0h  op: %s result: %0h",
                     bfm.A, bfm.B, bfm.op_set.name(), bfm.result);
      end : self_checker
   endtask : run_phase
endclass : scoreboard

add_tester.svh

class add_tester extends random_tester;
   `uvm_component_utils(add_tester)
         
   function new (string name, uvm_component parent);
      super.new(name, parent);
   endfunction : new

   function operation_t get_op();
      bit [2:0] op_choice;
      return add_op;
   endfunction : get_op

endclass : add_tester

ramdom_tester.svh

class random_tester extends uvm_component;
   `uvm_component_utils (random_tester)

   virtual tinyalu_bfm bfm;

   function new (string name, uvm_component parent);
      super.new(name, parent);
   endfunction : new
   
   virtual function operation_t get_op();
      bit [2:0] op_choice;
      op_choice = $random;
      case (op_choice)
        3'b000 : return no_op;
        3'b001 : return add_op;
        3'b010 : return and_op;
        3'b011 : return xor_op;
        3'b100 : return mul_op;
        3'b101 : return no_op;
        3'b110 : return rst_op;
        3'b111 : return rst_op;
      endcase // case (op_choice)
   endfunction : get_op

   virtual      function byte get_data();
      bit [1:0] zero_ones;
      zero_ones = $random;
      if (zero_ones == 2'b00)
        return 8'h00;
      else if (zero_ones == 2'b11)
        return 8'hFF;
      else
        return $random;
   endfunction : get_data
   
   function void build_phase(uvm_phase phase);
      if(!uvm_config_db #(virtual tinyalu_bfm)::get(null, "*","bfm", bfm))
        $fatal("Failed to get BFM");
   endfunction : build_phase

   task run_phase(uvm_phase phase);
      byte         unsigned        iA;
      byte         unsigned        iB;
      operation_t                  op_set;
      shortint     result;
      
      phase.raise_objection(this);
      bfm.reset_alu();
      repeat (1000) begin : random_loop
         op_set = get_op();
         iA = get_data();
         iB = get_data();
         bfm.send_op(iA, iB, op_set, result);
      end : random_loop
      #500;
      phase.drop_objection(this);
   endtask : run_phase
   
   
endclass : random_tester

random_test.svh

class random_test extends uvm_test;
   `uvm_component_utils(random_test);

   random_tester tester_h;
   coverage      coverage_h;
   scoreboard    scoreboard_h;

   function void build_phase(uvm_phase phase);  //重载了build_phase然后例化了三个验证平台组件
      tester_h      = new("tester_h", this);
      coverage_h    = new("coverage_h",    this);
      scoreboard_h  = new("scoreboard_h",    this);
   endfunction : build_phase
   
   function new (string name, uvm_component parent);
      super.new(name,parent);
   endfunction : new

endclass

add_test.svh

class add_test extends random_test;   //add_test继承了random_test
   `uvm_component_utils(add_test);

   add_tester tester_h;
   
   function new (string name, uvm_component parent);
      super.new(name,parent);
   endfunction : new
  
endclass

用UVM启动仿真

top.sv(和UVM test那一节一样)

module top;
   import uvm_pkg::*;
`include "uvm_macros.svh"

   import   tinyalu_pkg::*;
`include "tinyalu_macros.svh"

   tinyalu_bfm       bfm();
   tinyalu DUT (.A(bfm.A), .B(bfm.B), .op(bfm.op), 
                .clk(bfm.clk), .reset_n(bfm.reset_n), 
                .start(bfm.start), .done(bfm.done), .result(bfm.result));

initial begin uvm_config_db #(virtual tinyalu_bfm)::set(null, "*", "bfm", bfm); run_test(); //run_test()方法从命令行得到一个类名字符串，然后用UVM Factory来创建这个类的测试对象，然后这个测试对象开始运行测试 end endmodule : top

UVM Primer - UVM Component

基础知识

tinyalu_pkg.sv

tinyalu_bfm.sv(和UVM test那一节一样)

tb_classes

用UVM启动仿真

猜你喜欢