转自：https://blog.csdn.net/u012566751/article/details/77046445
一篇很好的介绍threshold文章；
图像的二值化就是将图像上的像素点的灰度值设置为0或255，这样将使整个图像呈现出明显的黑白效果。在数字图像处理中，二值图像占有非常重要的地位，图像的二值化使图像中数据量大为减少，从而能凸显出目标的轮廓。OpenCV中提供了函数cv::threshold();
注意:作者采用OpenCV 3.0.0
函数原型
参数说明
src：源图像，可以为8位的灰度图，也可以为32位的彩色图像。（两者由区别）
dst：输出图像
thresh：阈值
maxval：dst图像中最大值
type：阈值类型，可以具体类型如下：
| 编号 | 阈值类型枚举 |
注意
|
| 1 | THRESH_BINARY | |
| 2 | THRESH_BINARY_INV | |
| 3 | THRESH_TRUNC | |
| 4 | THRESH_TOZERO | |
| 5 | THRESH_TOZERO_INV | |
| 6 | THRESH_MASK |
不支持
|
| 7 | THRESH_OTSU |
不支持32位
|
| 8 | THRESH_TRIANGLE |
不支持32位
|
具体如下表
生成关系如下表
测试代码
|
Mat gray;
cvtColor(src, gray, CV_BGR2GRAY);
// 全局二值化
int th = 100;
cv::Mat threshold1,threshold2,threshold3,threshold4,threshold5,threshold6,threshold7,threshold8;
cv::threshold(gray, threshold1, th, 255, THRESH_BINARY);
cv::threshold(gray, threshold2, th, 255, THRESH_BINARY_INV);
cv::threshold(gray, threshold3, th, 255, THRESH_TRUNC);
cv::threshold(gray, threshold4, th, 255, THRESH_TOZERO);
cv::threshold(gray, threshold5, th, 255, THRESH_TOZERO_INV);
//cv::threshold(gray, threshold6, th, 255, THRESH_MASK);
cv::threshold(gray, threshold7, th, 255, THRESH_OTSU);
cv::threshold(gray, threshold8, th, 255, THRESH_TRIANGLE);
cv::imshow("THRESH_BINARY", threshold1);
cv::imshow("THRESH_BINARY_INV", threshold2);
cv::imshow("THRESH_TRUNC", threshold3);
cv::imshow("THRESH_TOZERO", threshold4);
cv::imshow("THRESH_TOZERO_INV", threshold5);
//cv::imshow("THRESH_MASK", threshold6);
cv::imshow("THRESH_OTSU", threshold7);
cv::imshow("THRESH_TRIANGLE", threshold8);
cv::waitKey(0);
|