版权声明：版权声明：本文为博主原创文章，未经博主允许不得转载。 https://blog.csdn.net/zxzxzx0119/article/details/82966388
LeetCode463-Island Perimeter(岛屿的周长)(规律/DFS/BFS)
- 找规律
- BFS
- DFS
题目链接
题目
找规律
这个方法的思路就是:
- 首先看如果没有相邻的方格的话，就是4 * (grid[i][j] == 1)的数量 ，记为island；
- 如果有相邻的，我们只需要遍历每一个，上下左右4个方向，有相邻的统计即可，最后用island - 这个数量即可；
class Solution {
public int islandPerimeter(int[][] grid) {
if(grid == null || grid.length == 0)
return 0;
int[][] dir = {{-1,0},{0,1},{1,0},{0,-1}};
int island = 0,neighbor = 0;
for(int i = 0; i < grid.length; i++){
for(int j = 0; j < grid[0].length; j++){
if(grid[i][j] == 1){
island++;
for(int k = 0; k < 4; k++){
if( judge(grid,i+dir[k][0],j+dir[k][1]) )
neighbor++;
}
}
}
}
return 4 * island - neighbor;
}
private boolean judge(int[][] grid,int i,int j){
if(i < 0 || i >= grid.length || j < 0 || j >= grid[0].length)
return false;
return grid[i][j] == 1;
}
}
这种写法一点小小的改进就是，只判断四个方向中的两个，这样就可以少判断一个岛屿，但是neighbor就要*2 :
class Solution {
public int islandPerimeter(int[][] grid) {
if(grid == null || grid.length == 0)
return 0;
int island = 0,neighbor = 0;
for(int i = 0; i < grid.length; i++){
for(int j = 0; j < grid[0].length; j++){
if(grid[i][j] == 1){
island++;
if(i - 1 >= 0 && grid[i-1][j] == 1)//检查上
neighbor++;
if(j + 1 < grid[0].length && grid[i][j+1] == 1)
neighbor++;
}
}
}
return 4 * island - neighbor * 2; //注意这里是 * 2
}
}
BFS
这题也可以使用BFS，但是这里要注意:
- 在判断check函数中，没有加入vis[i][j] 的判断，因为这会影响neighbor的统计；
- 因为neighbor的统计不依赖于 是否访问过这个方格，而是只看这个方格是否有相邻的方格；
class Solution {
private class Coordinate{
public int x;
public int y;
public Coordinate(int x,int y){
this.x = x;
this.y = y;
}
}
public int islandPerimeter(int[][] grid) {
if(grid == null || grid.length == 0)
return 0;
int[] x = {-1,0,1,0};
int[] y = {0,1,0,-1};
Queue<Coordinate>queue = new LinkedList<>();
boolean[][] vis = new boolean[grid.length][grid[0].length];
int res = 0;
Coordinate cur = null,next = new Coordinate(-1,-1);
for(int i = 0; i < grid.length; i++){
for(int j = 0; j < grid[0].length; j++){
if(grid[i][j] == 0 || vis[i][j])
continue;
queue.add(new Coordinate(i,j)); // add the start
vis[i][j] = true;
// beign the BFS
while(!queue.isEmpty()){
cur = queue.poll();
res += 4;
int neighbor = 0;
for(int k = 0; k < 4; k++){
next.x = cur.x + x[k];
next.y = cur.y + y[k];
if(check(grid,next.x,next.y,vis)){
if(!vis[next.x][next.y]){
vis[next.x][next.y] = true;
queue.add(new Coordinate(next.x,next.y));
}
neighbor++;//无论是否 vis 都要++
}
}
res -= neighbor;
}
}
}
return res;
}
//注意这里 没有判断 !vis[i][j] 因为那样不能正确统计 count
private boolean check(int[][] grid,int i,int j,boolean[][] vis){
return i >= 0 && i < grid.length && j >= 0 && j < grid[0].length && grid[i][j] == 1;
}
}
DFS
类似的，会DFS就行，但是也要和BFS一样，注意:
- 虽然访问过了，但是还是要减去1的情况，也就是else if中的；
- 没访问过，是１，当然也要减去1；
class Solution {
int[] dirx = {-1,0,1,0};
int[] diry = {0,1,0,-1};
boolean[][] vis;
public int islandPerimeter(int[][] grid) {
if(grid == null || grid.length == 0 || grid[0].length == 0)
return 0;
int res = 0;
vis = new boolean[grid.length][grid[0].length];
for(int i = 0; i < grid.length; i++){
for(int j = 0; j < grid[0].length; j++){
if(grid[i][j] == 1 && !vis[i][j])
res += dfs(grid,i,j);
}
}
return res;
}
private int dfs(int[][] grid,int x,int y){
vis[x][y] = true;
int edges = 4;
for(int i = 0; i < 4; i++){
int nx = x + dirx[i];
int ny = y + diry[i];
if(check(grid,nx,ny)){
if(grid[nx][ny] == 1 && !vis[nx][ny]){
edges += dfs(grid,nx,ny);
edges--; // 因为有1也是相邻，所以要 -1 注意不是-2，因为只负责一边
}else if(vis[nx][ny]){ // grid[nx][ny] == 1 && vis[nx][ny] --> 这个也要,不要忘了
edges--;
}
}
}
return edges;
}
private boolean check(int[][] grid,int i,int j){
return i >= 0 && i < grid.length && j >= 0 && j < grid[0].length;
}
}
改一下check函数，改写一下，和BFS更像，也阔以:
class Solution {
int[] dirx = {-1,0,1,0};
int[] diry = {0,1,0,-1};
boolean[][] vis;
public int islandPerimeter(int[][] grid) {
if(grid == null || grid.length == 0 || grid[0].length == 0)
return 0;
int res = 0;
vis = new boolean[grid.length][grid[0].length];
for(int i = 0; i < grid.length; i++){
for(int j = 0; j < grid[0].length; j++){
if(grid[i][j] == 1 && !vis[i][j])
res += dfs(grid,i,j);
}
}
return res;
}
private int dfs(int[][] grid,int x,int y){
vis[x][y] = true;
int edges = 4;
for(int i = 0; i < 4; i++){
int nx = x + dirx[i];
int ny = y + diry[i];
if(check(grid,nx,ny)){
if(!vis[nx][ny]){
edges += dfs(grid,nx,ny);
}
edges--; //无论是否访问过都要 减去 1, -1 注意不是-2，因为只负责一边
}
}
return edges;
}
//这里改了
private boolean check(int[][] grid,int i,int j){
return i >= 0 && i < grid.length && j >= 0 && j < grid[0].length && grid[i][j] == 1;
}
}