版权声明：本文为博主原创文章，未经博主允许不得转载。 https://blog.csdn.net/qq_16777851/article/details/82050417
本想新开一个题目的，但又想到，内核和文件系统的移植应该只有两篇文章，所以索性就在这里直接续下去。
首先下载内核，先看一下比较新4.x的能不能用
我下载了一个4.1.40版本的
打开顶层Makefile，搜索找到 CROSS_COMPILE
按上图所示，注释掉SUBARCH，修改ARCH和CROSS_COMPILE
搜索找到s5pv210_defconfig，然后make 默认配置
修改调试串口
make menuconfig1.顶层找到，kernel hacking
2.他默认调试串口是0，我们要选择成2
3.选择成2，后make uImage
4.说我们没LOADADDR地址，load地址就是uIamge生成时头部的load地址信息
5.添加LOADADDR编译
make uImage -j4 LOADADDR=0x30008000
6.拷贝到tftp服务器，使用uboot下载启动
可以启动，出来内核的打印信息，说明我们的bootm命令是正确的，但因为新的kernel的传参只支持设备树方式，所以
这边启动失败。
因为我的设备树还没学习，所以，使用一个3.x版本的支持tag方式传参的内核来启动。
经过测试，3.x后期的也是只支持设备树方式传参，所以我选择一个3.x早期的linux-3.16.57
新的压缩格式非bz2和gz xz解压使用Jxf，注意这里的J是大写
tar Jxvf linux-3.16.57.tar.xz 重复上面步骤。
配置值完串口后，增加一步，配置板子
1.选择System Type，进入
2.去掉C110支持的machies
210，我们也只支持SMDKV210
3.修改zImage的解压地址
因为我们s5pv210_defconfig没有打开这个宏，所以我我们要指定解压地址
这个宏的作用是自动设置解压重定位地址。
.text
#ifdef CONFIG_AUTO_ZRELADDR
@ determine final kernel image address
mov r4, pc
and r4, r4, #0xf8000000
add r4, r4, #TEXT_OFFSET
#else
ldr r4, =zreladdr
#endif
我们没是能zh'g这个宏，所以要手动配置zreladdr参数
这个参数在下面文件
arch/arm/mach-s5pv210/Makefile.boot 
可以看到，解压地址是0x20008000，因为我我们的DDR是从0x30000000开始的所以对传参和解压地址都要 更改。
修改后
编译生成uImage
make uImage -j4
这次是一次ok，没有让我们输入LOADADDR，主要原因就是我们在mach文件夹里面的Makefile.boot里面已经制定了。
可以看到，uImage的头信息就是我们指定的。
使用uboot的tftpboot 下载启动尝试启动，这次我们终于看到比较多的打印信息，说明已经差不多了。
SMDKV210 # bootm 30008000
## Booting kernel from Legacy Image at 30008000 ...
Image Name: Linux-3.16.57
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1382344 Bytes = 1.3 MiB
Load Address: 30008000
Entry Point: 30008000
Loading Kernel Image ... OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
Booting Linux on physical CPU 0x0
Linux version 3.16.57 (run@ubuntu) (gcc version 5.4.1 20160919 (release) [ARM/embedded-5-branch revision 240496] (GNU Tools for ARM Embedded Processors) ) #1 PREEMPT Sat Aug 25 15:28:17 CST 2018
CPU: ARMv7 Processor [412fc082] revision 2 (ARMv7), cr=10c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: SMDKV210
Memory policy: Data cache writeback
CPU S5PV210/S5PC110 (id 0x43110220)
S3C24XX Clocks, Copyright 2004 Simtec Electronics
S5PV210: PLL settings, A=1000000000, M=667000000, E=96000000 V=54000000
S5PV210: ARMCLK=1000000000, HCLKM=200000000, HCLKD=166750000
HCLKP=133400000, PCLKM=100000000, PCLKD=83375000, PCLKP=66700000
sclk_dmc: source is mout_mpll (1), rate is 166750000
sclk_onenand: source is hclk_dsys (1), rate is 166750000
sclk_fimc: source is ext_xtal (0), rate is 24000000
sclk_fimc: source is ext_xtal (0), rate is 24000000
sclk_fimc: source is ext_xtal (0), rate is 24000000
sclk_cam0: source is ext_xtal (0), rate is 24000000
sclk_cam1: source is ext_xtal (0), rate is 24000000
sclk_fimd: source is ext_xtal (0), rate is 24000000
sclk_mfc: source is sclk_a2m (0), rate is 200000000
sclk_g2d: source is sclk_a2m (0), rate is 200000000
sclk_g3d: source is sclk_a2m (0), rate is 200000000
sclk_csis: source is ext_xtal (0), rate is 24000000
sclk_pwi: source is ext_xtal (0), rate is 24000000
sclk_pwm: source is ext_xtal (0), rate is 24000000
CPU: All CPU(s) started in SVC mode.
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 128000
Kernel command line: root=/dev/nfs nfsroot=192.168.0.107:/home/run/work/rootfs/rootfs ip=192.168.0.20:192.168.0.107:192.168.0.1:255.255.255.0::eth0:off init=/linuxrc console=ttySAC2,115200
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 508664K/516096K available (1837K kernel code, 163K rwdata, 568K rodata, 107K init, 200K bss, 7432K reserved)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xa0800000 - 0xff000000 (1512 MB)
lowmem : 0x80000000 - 0xa0000000 ( 512 MB)
modules : 0x7f000000 - 0x80000000 ( 16 MB)
.text : 0x80008000 - 0x80261738 (2406 kB)
.init : 0x80262000 - 0x8027ccac ( 108 kB)
.data : 0x8027e000 - 0x802a6f20 ( 164 kB)
.bss : 0x802a6f2c - 0x802d901c ( 201 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Preemptible hierarchical RCU implementation.
NR_IRQS:208
VIC @f6000000: id 0x00041192, vendor 0x41
VIC @f6010000: id 0x00041192, vendor 0x41
VIC @f6020000: id 0x00041192, vendor 0x41
VIC @f6030000: id 0x00041192, vendor 0x41
sched_clock: 32 bits at 33MHz, resolution 29ns, wraps every 128784626658ns
Console: colour dummy device 80x30
Calibrating delay loop... 997.78 BogoMIPS (lpj=2494464)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0x301c29c8 - 0x301c2a20
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
futex hash table entries: 256 (order: 0, 7168 bytes)
DMA: preallocated 256 KiB pool for atomic coherent allocations
S3C Power Management, Copyright 2004 Simtec Electronics
S5PV210: Initializing architecture
SCSI subsystem initialized
Switched to clocksource samsung_clocksource_timer
ROMFS MTD (C) 2007 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 dma-pl330.0: Loaded driver for PL330 DMAC-267056
dma-pl330 dma-pl330.0: DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
dma-pl330 dma-pl330.1: Loaded driver for PL330 DMAC-267056
dma-pl330 dma-pl330.1: DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
s5pv210-uart.0: ttySAC0 at MMIO 0xe2900000 (irq = 74, base_baud = 0) is a S3C6400/10
s5pv210-uart.1: ttySAC1 at MMIO 0xe2900400 (irq = 75, base_baud = 0) is a S3C6400/10
s5pv210-uart.2: ttySAC2 at MMIO 0xe2900800 (irq = 76, base_baud = 0) is a S3C6400/10
console [ttySAC2] enabled
s5pv210-uart.3: ttySAC3 at MMIO 0xe2900c00 (irq = 77, base_baud = 0) is a S3C6400/10
brd: module loaded
loop: module loaded
mousedev: PS/2 mouse device common for all mice
VFS: Cannot open root device "nfs" or unknown-block(0,255): error -6
Please append a correct "root=" boot option; here are the available partitions:
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,255)
CPU: 0 PID: 1 Comm: swapper Not tainted 3.16.57 #1
[<80012dd0>] (unwind_backtrace) from [<80011080>] (show_stack+0x10/0x14)
[<80011080>] (show_stack) from [<801bd660>] (panic+0xa0/0x20c)
[<801bd660>] (panic) from [<80263220>] (mount_block_root+0x25c/0x2d8)
[<80263220>] (mount_block_root) from [<80263580>] (prepare_namespace+0x19c/0x1d0)
[<80263580>] (prepare_namespace) from [<80262e1c>] (kernel_init_freeable+0x1b4/0x1c0)
[<80262e1c>] (kernel_init_freeable) from [<801bcf50>] (kernel_init+0x8/0xe8)
[<801bcf50>] (kernel_init) from [<8000e4e0>] (ret_from_fork+0x14/0x34)
---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,255)
从出错位置看到是VFS死掉，因为我们现在是即没有初始化网卡，也没配置nfs网络文件系统，所以肯定死掉。
一个一个解决。
1.配置网卡驱动。
打开平台相关的数据。
vi arch/arm/mach-s5pv210/mach-smdkv210.c 因为smdkv210本身就是支持dm9000的，所以我们只要修改一下参数就可以了。
可以看到它使用的SROM的BANK5 数据线是ADDR1，中断引脚是9.这些我们都要改掉。
打开寄存器地址
vi arch/arm/mach-s5pv210/include/mach/map.h 
可以看到SDRAM地址有问题，
修改后
引脚，SROM寄存器初始化，因为我们在uboot中已经初始化过了，这里可以不用再次初始化（再次初始化也没关系）
这里就不浪费时间一个一个分析了了，具体看uboot中的初始化。
2.支持网络功能
可以看到，之前的默认是不支持任何网络配置的
这里先选中Networking support
先进入 Networking options --->
默认是什么都没选择的
选择下面的一些基本配置
现在是支持网络了，我们还需要让支持DM9000网卡
返回顶层，进入设备驱动Device Drivers --->
选中网络设备支持
进入Ethernet driver support (NEW) --->
选中DM9000 support (NEW)，其他网卡我们没有，所以全部去掉
因为我们常用网络文件系统做开发，所以增加网络文件系统配置
回到顶层进入File systems
选中并进入Network File Systems --->
我们选择nfs根文件系统和客户端支持
好了，保存编译，尝试启动。
因为我电脑上已经搭建好nfs服务器和网络文件系统，所以可以直接尝试。
没搭建的小伙伴，我下一节记录制作一个网络文件系统的步骤。
可以看我一节的博客后再继续看这里。
SD checksum Error
U-Boot 2017.01 (Aug 25 2018 - 01:57:42 +0800)
CPU: S5PC110 @ 1 GHz
Model: Samsung Goni based on S5PC110
Board: SMDKV210
DRAM: 512 MiB
MMC: SAMSUNG SDHCI: 0, SAMSUNG SDHCI: 1
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Net: dm9000
Hit any key to stop autoboot: 0
SMDKV210 # tftpboot 30008000 uImage
dm9000 i/o: 0x88000000, id: 0x90000a46
DM9000: running in 16 bit mode
MAC: 00:19:d3:ff:ff:ff
operating at 100M full duplex mode
Using dm9000 device
TFTP from server 192.168.0.107; our IP address is 192.168.0.100
Filename 'uImage'.
Load address: 0x30008000
Loading: #################################################################
##############################
682.6 KiB/s
done
Bytes transferred = 1382408 (151808 hex)
SMDKV210 # bootm 30008000
## Booting kernel from Legacy Image at 30008000 ...
Image Name: Linux-3.16.57
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1382344 Bytes = 1.3 MiB
Load Address: 30008000
Entry Point: 30008000
Loading Kernel Image ... OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
Booting Linux on physical CPU 0x0
Linux version 3.16.57 (run@ubuntu) (gcc version 5.4.1 20160919 (release) [ARM/embedded-5-branch revision 240496] (GNU Tools for ARM Embedded Processors) ) #1 PREEMPT Sat Aug 25 16:41:35 CST 2018
CPU: ARMv7 Processor [412fc082] revision 2 (ARMv7), cr=10c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: SMDKV210
Memory policy: Data cache writeback
CPU S5PV210/S5PC110 (id 0x43110220)
S3C24XX Clocks, Copyright 2004 Simtec Electronics
S5PV210: PLL settings, A=1000000000, M=667000000, E=96000000 V=54000000
S5PV210: ARMCLK=1000000000, HCLKM=200000000, HCLKD=166750000
HCLKP=133400000, PCLKM=100000000, PCLKD=83375000, PCLKP=66700000
sclk_dmc: source is mout_mpll (1), rate is 166750000
sclk_onenand: source is hclk_dsys (1), rate is 166750000
sclk_fimc: source is ext_xtal (0), rate is 24000000
sclk_fimc: source is ext_xtal (0), rate is 24000000
sclk_fimc: source is ext_xtal (0), rate is 24000000
sclk_cam0: source is ext_xtal (0), rate is 24000000
sclk_cam1: source is ext_xtal (0), rate is 24000000
sclk_fimd: source is ext_xtal (0), rate is 24000000
sclk_mfc: source is sclk_a2m (0), rate is 200000000
sclk_g2d: source is sclk_a2m (0), rate is 200000000
sclk_g3d: source is sclk_a2m (0), rate is 200000000
sclk_csis: source is ext_xtal (0), rate is 24000000
sclk_pwi: source is ext_xtal (0), rate is 24000000
sclk_pwm: source is ext_xtal (0), rate is 24000000
CPU: All CPU(s) started in SVC mode.
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 128000
Kernel command line: root=/dev/nfs nfsroot=192.168.0.107:/home/run/work/rootfs/rootfs ip=192.168.0.20:192.168.0.107:192.168.0.1:255.255.255.0::eth0:off init=/linuxrc console=ttySAC2,115200
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 508664K/516096K available (1837K kernel code, 163K rwdata, 568K rodata, 107K init, 200K bss, 7432K reserved)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xa0800000 - 0xff000000 (1512 MB)
lowmem : 0x80000000 - 0xa0000000 ( 512 MB)
modules : 0x7f000000 - 0x80000000 ( 16 MB)
.text : 0x80008000 - 0x80261738 (2406 kB)
.init : 0x80262000 - 0x8027ccac ( 108 kB)
.data : 0x8027e000 - 0x802a6f20 ( 164 kB)
.bss : 0x802a6f2c - 0x802d901c ( 201 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Preemptible hierarchical RCU implementation.
NR_IRQS:208
VIC @f6000000: id 0x00041192, vendor 0x41
VIC @f6010000: id 0x00041192, vendor 0x41
VIC @f6020000: id 0x00041192, vendor 0x41
VIC @f6030000: id 0x00041192, vendor 0x41
sched_clock: 32 bits at 33MHz, resolution 29ns, wraps every 128784626658ns
Console: colour dummy device 80x30
Calibrating delay loop... 997.78 BogoMIPS (lpj=2494464)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0x301c29c8 - 0x301c2a20
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
futex hash table entries: 256 (order: 0, 7168 bytes)
DMA: preallocated 256 KiB pool for atomic coherent allocations
S3C Power Management, Copyright 2004 Simtec Electronics
S5PV210: Initializing architecture
SCSI subsystem initialized
Switched to clocksource samsung_clocksource_timer
ROMFS MTD (C) 2007 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 dma-pl330.0: Loaded driver for PL330 DMAC-267056
dma-pl330 dma-pl330.0: DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
dma-pl330 dma-pl330.1: Loaded driver for PL330 DMAC-267056
dma-pl330 dma-pl330.1: DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
s5pv210-uart.0: ttySAC0 at MMIO 0xe2900000 (irq = 74, base_baud = 0) is a S3C6400/10
s5pv210-uart.1: ttySAC1 at MMIO 0xe2900400 (irq = 75, base_baud = 0) is a S3C6400/10
s5pv210-uart.2: ttySAC2 at MMIO 0xe2900800 (irq = 76, base_baud = 0) is a S3C6400/10
console [ttySAC2] enabled
s5pv210-uart.3: ttySAC3 at MMIO 0xe2900c00 (irq = 77, base_baud = 0) is a S3C6400/10
brd: module loaded
loop: module loaded
mousedev: PS/2 mouse device common for all mice
VFS: Cannot open root device "nfs" or unknown-block(0,255): error -6
Please append a correct "root=" boot option; here are the available partitions:
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,255)
CPU: 0 PID: 1 Comm: swapper Not tainted 3.16.57 #1
[<80012dd0>] (unwind_backtrace) from [<80011080>] (show_stack+0x10/0x14)
[<80011080>] (show_stack) from [<801bd660>] (panic+0xa0/0x20c)
[<801bd660>] (panic) from [<80263220>] (mount_block_root+0x25c/0x2d8)
[<80263220>] (mount_block_root) from [<80263580>] (prepare_namespace+0x19c/0x1d0)
[<80263580>] (prepare_namespace) from [<80262e1c>] (kernel_init_freeable+0x1b4/0x1c0)
[<80262e1c>] (kernel_init_freeable) from [<801bcf50>] (kernel_init+0x8/0xe8)
[<801bcf50>] (kernel_init) from [<8000e4e0>] (ret_from_fork+0x14/0x34)
---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,255)
SD checksum Error
U-Boot 2017.01 (Aug 25 2018 - 01:57:42 +0800)
CPU: S5PC110 @ 1 GHz
Model: Samsung Goni based on S5PC110
Board: SMDKV210
DRAM: 512 MiB
MMC: SAMSUNG SDHCI: 0, SAMSUNG SDHCI: 1
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Net: dm9000
Hit any key to stop autoboot: 0
SMDKV210 # tftpboot 30008000 uImage
dm9000 i/o: 0x88000000, id: 0x90000a46
DM9000: running in 16 bit mode
MAC: 00:19:d3:ff:ff:ff
operating at 100M full duplex mode
Using dm9000 device
TFTP from server 192.168.0.107; our IP address is 192.168.0.100
Filename 'uImage'.
Load address: 0x30008000
Loading: #################################################################
#################################################################
########
615.2 KiB/s
done
Bytes transferred = 2022584 (1edcb8 hex)
SMDKV210 # b
base bdinfo boot bootd bootm bootp
SMDKV210 # bootm 30008000
## Booting kernel from Legacy Image at 30008000 ...
Image Name: Linux-3.16.57
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2022520 Bytes = 1.9 MiB
Load Address: 30008000
Entry Point: 30008000
Loading Kernel Image ... OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
Booting Linux on physical CPU 0x0
Linux version 3.16.57 (run@ubuntu) (gcc version 5.4.1 20160919 (release) [ARM/embedded-5-branch revision 240496] (GNU Tools for ARM Embedded Processors) ) #2 PREEMPT Sat Aug 25 16:52:51 CST 2018
CPU: ARMv7 Processor [412fc082] revision 2 (ARMv7), cr=10c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: SMDKV210
Memory policy: Data cache writeback
CPU S5PV210/S5PC110 (id 0x43110220)
S3C24XX Clocks, Copyright 2004 Simtec Electronics
S5PV210: PLL settings, A=1000000000, M=667000000, E=96000000 V=54000000
S5PV210: ARMCLK=1000000000, HCLKM=200000000, HCLKD=166750000
HCLKP=133400000, PCLKM=100000000, PCLKD=83375000, PCLKP=66700000
sclk_dmc: source is mout_mpll (1), rate is 166750000
sclk_onenand: source is hclk_dsys (1), rate is 166750000
sclk_fimc: source is ext_xtal (0), rate is 24000000
sclk_fimc: source is ext_xtal (0), rate is 24000000
sclk_fimc: source is ext_xtal (0), rate is 24000000
sclk_cam0: source is ext_xtal (0), rate is 24000000
sclk_cam1: source is ext_xtal (0), rate is 24000000
sclk_fimd: source is ext_xtal (0), rate is 24000000
sclk_mfc: source is sclk_a2m (0), rate is 200000000
sclk_g2d: source is sclk_a2m (0), rate is 200000000
sclk_g3d: source is sclk_a2m (0), rate is 200000000
sclk_csis: source is ext_xtal (0), rate is 24000000
sclk_pwi: source is ext_xtal (0), rate is 24000000
sclk_pwm: source is ext_xtal (0), rate is 24000000
CPU: All CPU(s) started in SVC mode.
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 128000
Kernel command line: root=/dev/nfs nfsroot=192.168.0.107:/home/run/work/rootfs/rootfs ip=192.168.0.20:192.168.0.107:192.168.0.1:255.255.255.0::eth0:off init=/linuxrc console=ttySAC2,115200
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 507416K/516096K available (2753K kernel code, 197K rwdata, 804K rodata, 129K init, 240K bss, 8680K reserved)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xa0800000 - 0xff000000 (1512 MB)
lowmem : 0x80000000 - 0xa0000000 ( 512 MB)
modules : 0x7f000000 - 0x80000000 ( 16 MB)
.text : 0x80008000 - 0x803818dc (3559 kB)
.init : 0x80382000 - 0x803a246c ( 130 kB)
.data : 0x803a4000 - 0x803d5400 ( 197 kB)
.bss : 0x803d540c - 0x80411700 ( 241 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Preemptible hierarchical RCU implementation.
NR_IRQS:208
VIC @f6000000: id 0x00041192, vendor 0x41
VIC @f6010000: id 0x00041192, vendor 0x41
VIC @f6020000: id 0x00041192, vendor 0x41
VIC @f6030000: id 0x00041192, vendor 0x41
sched_clock: 32 bits at 33MHz, resolution 29ns, wraps every 128784626658ns
Console: colour dummy device 80x30
Calibrating delay loop... 997.78 BogoMIPS (lpj=2494464)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0x302a1670 - 0x302a16c8
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
futex hash table entries: 256 (order: 0, 7168 bytes)
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
S3C Power Management, Copyright 2004 Simtec Electronics
S5PV210: Initializing architecture
SCSI subsystem initialized
Switched to clocksource samsung_clocksource_timer
NET: Registered protocol family 2
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 4, 81920 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP: reno registered
UDP hash table entries: 256 (order: 1, 12288 bytes)
UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
ROMFS MTD (C) 2007 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 dma-pl330.0: Loaded driver for PL330 DMAC-267056
dma-pl330 dma-pl330.0: DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
dma-pl330 dma-pl330.1: Loaded driver for PL330 DMAC-267056
dma-pl330 dma-pl330.1: DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
s5pv210-uart.0: ttySAC0 at MMIO 0xe2900000 (irq = 74, base_baud = 0) is a S3C6400/10
s5pv210-uart.1: ttySAC1 at MMIO 0xe2900400 (irq = 75, base_baud = 0) is a S3C6400/10
s5pv210-uart.2: ttySAC2 at MMIO 0xe2900800 (irq = 76, base_baud = 0) is a S3C6400/10
console [ttySAC2] enabled
s5pv210-uart.3: ttySAC3 at MMIO 0xe2900c00 (irq = 77, base_baud = 0) is a S3C6400/10
brd: module loaded
loop: module loaded
eth0: dm9000b at a085a000,a085c004 IRQ 42 MAC: 00:09:c0:ff:ec:48 (platform data)
mousedev: PS/2 mouse device common for all mice
TCP: cubic registered
NET: Registered protocol family 17
dm9000 dm9000 eth0: link down
dm9000 dm9000 eth0: link down
IP-Config: Complete:
device=eth0, hwaddr=00:09:c0:ff:ec:48, ipaddr=192.168.0.20, mask=255.255.255.0, gw=192.168.0.1
dm9000 dm9000 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
host=192.168.0.20, domain=, nis-domain=(none)
bootserver=192.168.0.107, rootserver=192.168.0.107, rootpath=
VFS: Mounted root (nfs filesystem) on device 0:10.
Freeing unused kernel memory: 128K (80382000 - 803a2000)
Please press Enter to activate this console. 可以看到已经可以正常使用了
这里补充一个点：
上一节我们分析的bootm中国，如果我们直接加载到内存的地址就是zImage将要运行的地址就是XIP，即不再搬移。
而如果我们下载的地址不是zImage的load加载地址，则uboot要负责搬移。
这里我们做一个小实验来验证一下。
通过上一节课我们知道了，uImage是zImage前面加64字节的hdr.
所以下载uImage到0x30007fc0，zImage起始就在0x30008000地址就是XIP地址了。
既然uboot会搬移zImage，是不是下载到ddr的任何位置都可以啊（前提是不能覆盖掉uboot本身）
我们做两个实验，分贝下载到0x30000000和0x40000000启动
可见uboot根据uImage的头信息做的事情还是比较有作用的。
为了每次uboot开机后都让我们不用手动敲下载命令，我就直接把启动命令bootcmd命令写到代码中。
注释掉goni开发板原有的，增加我们的
#define CONFIG_BOOTCOMMAND "tftpboot 0x30007fc0 uImage;bootm 0x30007fc0"这里使用0x30007fc0的原因前面也看到来，这个位置可以uboot中不用再次搬移zImage，即可以提高启动时间
可以看到是自动开机就下载，没输入任何命令。
后面有时间我再修改别的命令，如MTD分区等。
所有的命令都属用到了，查看它的help说明，然后根据自己需要群殴需要修改。