文章目录
画板框
Board Geometry / Design_Outline, 添加矩形, 右边Options->Corners->选择圆角Round, 倒角3mm, 然后输入左下角坐标(x -45 -20.9)和右上角坐标(x 45 20.9), 这样, 板子边框就生成了.
设置路径
主要是焊盘(pad)和Symbol(psm)的路径.
导入网表
导入网表后, netrev.lst文件列出了错误和警告.
WARNING(SPMHNI-192).
WARNING(SPMHNI-192): Device/Symbol check warning detected.
WARNING(SPMHNI-194): Symbol 'DO-214AC' used by RefDes D1 for device 'DIODE_ZENER_DO-214AC_SS54' not found. The symbol either does not exist in the library path (PSMPATH) or is an old symbol from a previous release.
到psmpath
