1. Download the operating system image
This article introduces the use of VitrualBox to build an openEuler system
openEuler download address
Download the following version of openEuler (based on centos)
2. Import into VitrualBox
1. Virtual machine import image
1. Create a new virtual machine name
2. Allocate memory
3. Create a virtual hard disk
4. Allocate hard disk size
5. Click Settings
6. Settings - Storage
Click the lower triangle arrow on the right, select the downloaded image,
delete the os1.vdi here, add the controller SATA, and add a new hard disk
7. Settings - System
Adjust the boot sequence and uncheck the floppy drive
8. Settings - Network
Select bridge mode here
9. After clicking OK, click Start
2. Install the system
Enter or wait for the default to enter
Wait for the operation to finish, press ESC to skip the check
1. Select the language, choose Chinese here
2. Set the installation location
Click Finish after ticking
3. Set up the network, open
3. Set the root password and click Finish
openEuler22
4. Start the installation
Note: When completion appears, close the current vbox window here, open Settings - System, modify the first boot sequence to be the hard disk or cancel the tick in front of the floppy drive.
Click the vbox "Start" button again
5. Login
Wait for no response, just press Enter several times and
enter the user password
root
openEuler22