所有课程见此链接：
01_ZigBee
传感器组网——光敏传感器
实验现象：
光敏电阻电路（输出数字信号）通过检测外界光线的情况；终端节点
采集光信号，与协调器组网后把采集的数据发送给协调器，协调器接收后串口打
印输出。
传感器介绍：
光敏传感器是最常见的传感器之一，它的种类繁多，主要有：光电管、光
电倍增管、光敏电阻、光敏三极管、太阳能电池、红外线传感器、紫外线传感器、
光纤式光电传感器、色彩传感器、
CCD
和
CMOS
图像传感器等。它的敏感波长
在可见光波长附近，包括红外线波长和紫外线波长。光传感器不只局限于对光的
探测，它还可以作为探测元件组成其他传感器，对许多非电量进行检测，只要将
这些非电量转换为光信号的变化即可。光传感器是目前产量最多、应用最广的传
感器之一，它在自动控制和非电量电测技术中占有非常重要的地位。最简单的光
敏传感器是光敏电阻，当光子冲击接合处就会产生电流。
程序小解：
光敏传感器模块的控制电路比较简单，只要硬件电路搭好了，给
CC2530
的
IO
口一个高低电平就是反映外界情况，终端节点通过点播方式发送到协调器，
协调器通过通常打印出来
,
在串口调试助手上面显示
,
这就实现了光敏的采集。此
处仅介绍大概步骤，具体的实现过程请查阅代码。
①打开例程 SampleApp.eww 工程，打开 SampleApp.c 文件（此实验比较简单，所
有内容在此文件内完成即可），定义光敏传感器输入 IO ——P2.0。
②先初始化 P2.0 引脚，设为输入模式。
③在点播函数里捕捉 IO 口的状态，利用周期性点播的定时器作为光线信息采集
时间，将采集到的信息发送给协调器。
OSAL_SampleApp.c
/**************************************************************************************************
Filename: OSAL_SampleApp.c
Revised: $Date: 2008-02-07 12:10:00 -0800 (Thu, 07 Feb 2008) $
Revision: $Revision: 16360 $
Description: This file contains all the settings and other functions
that the user should set and change.
Copyright 2007 Texas Instruments Incorporated. All rights reserved.
IMPORTANT: Your use of this Software is limited to those specific rights
granted under the terms of a software license agreement between the user
who downloaded the software, his/her employer (which must be your employer)
and Texas Instruments Incorporated (the "License"). You may not use this
Software unless you agree to abide by the terms of the License. The License
limits your use, and you acknowledge, that the Software may not be modified,
copied or distributed unless embedded on a Texas Instruments microcontroller
or used solely and exclusively in conjunction with a Texas Instruments radio
frequency transceiver, which is integrated into your product. Other than for
the foregoing purpose, you may not use, reproduce, copy, prepare derivative
works of, modify, distribute, perform, display or sell this Software and/or
its documentation for any purpose.
YOU FURTHER ACKNOWLEDGE AND AGREE THAT THE SOFTWARE AND DOCUMENTATION ARE
PROVIDED 揂S IS?WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY, TITLE,
NON-INFRINGEMENT AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL
TEXAS INSTRUMENTS OR ITS LICENSORS BE LIABLE OR OBLIGATED UNDER CONTRACT,
NEGLIGENCE, STRICT LIABILITY, CONTRIBUTION, BREACH OF WARRANTY, OR OTHER
LEGAL EQUITABLE THEORY ANY DIRECT OR INDIRECT DAMAGES OR EXPENSES
INCLUDING BUT NOT LIMITED TO ANY INCIDENTAL, SPECIAL, INDIRECT, PUNITIVE
OR CONSEQUENTIAL DAMAGES, LOST PROFITS OR LOST DATA, COST OF PROCUREMENT
OF SUBSTITUTE GOODS, TECHNOLOGY, SERVICES, OR ANY CLAIMS BY THIRD PARTIES
(INCLUDING BUT NOT LIMITED TO ANY DEFENSE THEREOF), OR OTHER SIMILAR COSTS.
Should you have any questions regarding your right to use this Software,
contact Texas Instruments Incorporated at www.TI.com.
**************************************************************************************************/
/*********************************************************************
* INCLUDES
*/
#include "ZComDef.h"
#include "hal_drivers.h"
#include "OSAL.h"
#include "OSAL_Tasks.h"
#if defined ( MT_TASK )
#include "MT.h"
#include "MT_TASK.h"
#endif
#include "nwk.h"
#include "APS.h"
#include "ZDApp.h"
#if defined ( ZIGBEE_FREQ_AGILITY ) || defined ( ZIGBEE_PANID_CONFLICT )
#include "ZDNwkMgr.h"
#endif
#if defined ( ZIGBEE_FRAGMENTATION )
#include "aps_frag.h"
#endif
#include "SampleApp.h"
/*********************************************************************
* GLOBAL VARIABLES
*/
// The order in this table must be identical to the task initialization calls below in osalInitTask.
const pTaskEventHandlerFn tasksArr[] = {
macEventLoop,
nwk_event_loop,
Hal_ProcessEvent,
#if defined( MT_TASK )
MT_ProcessEvent,
#endif
APS_event_loop,
#if defined ( ZIGBEE_FRAGMENTATION )
APSF_ProcessEvent,
#endif
ZDApp_event_loop,
#if defined ( ZIGBEE_FREQ_AGILITY ) || defined ( ZIGBEE_PANID_CONFLICT )
ZDNwkMgr_event_loop,
#endif
SampleApp_ProcessEvent
};
const uint8 tasksCnt = sizeof( tasksArr ) / sizeof( tasksArr[0] );
uint16 *tasksEvents;
/*********************************************************************
* FUNCTIONS
*********************************************************************/
/*********************************************************************
* @fn osalInitTasks
*
* @brief This function invokes the initialization function for each task.
*
* @param void
*
* @return none
*/
void osalInitTasks( void )
{
uint8 taskID = 0;
tasksEvents = (uint16 *)osal_mem_alloc( sizeof( uint16 ) * tasksCnt);
osal_memset( tasksEvents, 0, (sizeof( uint16 ) * tasksCnt));
macTaskInit( taskID++ );
nwk_init( taskID++ );
Hal_Init( taskID++ );
#if defined( MT_TASK )
MT_TaskInit( taskID++ );
#endif
APS_Init( taskID++ );
#if defined ( ZIGBEE_FRAGMENTATION )
APSF_Init( taskID++ );
#endif
ZDApp_Init( taskID++ );
#if defined ( ZIGBEE_FREQ_AGILITY ) || defined ( ZIGBEE_PANID_CONFLICT )
ZDNwkMgr_Init( taskID++ );
#endif
SampleApp_Init( taskID );
}
/*********************************************************************
*********************************************************************/
SampleApp.c
/**************************************************************************************************
Filename: SampleApp.c
Revised: $Date: 2009-03-18 15:56:27 -0700 (Wed, 18 Mar 2009) $
Revision: $Revision: 19453 $
Description: Sample Application (no Profile).
Copyright 2007 Texas Instruments Incorporated. All rights reserved.
IMPORTANT: Your use of this Software is limited to those specific rights
granted under the terms of a software license agreement between the user
who downloaded the software, his/her employer (which must be your employer)
and Texas Instruments Incorporated (the "License"). You may not use this
Software unless you agree to abide by the terms of the License. The License
limits your use, and you acknowledge, that the Software may not be modified,
copied or distributed unless embedded on a Texas Instruments microcontroller
or used solely and exclusively in conjunction with a Texas Instruments radio
frequency transceiver, which is integrated into your product. Other than for
the foregoing purpose, you may not use, reproduce, copy, prepare derivative
works of, modify, distribute, perform, display or sell this Software and/or
its documentation for any purpose.
YOU FURTHER ACKNOWLEDGE AND AGREE THAT THE SOFTWARE AND DOCUMENTATION ARE
PROVIDED 揂S IS?WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY, TITLE,
NON-INFRINGEMENT AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL
TEXAS INSTRUMENTS OR ITS LICENSORS BE LIABLE OR OBLIGATED UNDER CONTRACT,
NEGLIGENCE, STRICT LIABILITY, CONTRIBUTION, BREACH OF WARRANTY, OR OTHER
LEGAL EQUITABLE THEORY ANY DIRECT OR INDIRECT DAMAGES OR EXPENSES
INCLUDING BUT NOT LIMITED TO ANY INCIDENTAL, SPECIAL, INDIRECT, PUNITIVE
OR CONSEQUENTIAL DAMAGES, LOST PROFITS OR LOST DATA, COST OF PROCUREMENT
OF SUBSTITUTE GOODS, TECHNOLOGY, SERVICES, OR ANY CLAIMS BY THIRD PARTIES
(INCLUDING BUT NOT LIMITED TO ANY DEFENSE THEREOF), OR OTHER SIMILAR COSTS.
Should you have any questions regarding your right to use this Software,
contact Texas Instruments Incorporated at www.TI.com.
**************************************************************************************************/
/*********************************************************************
This application isn't intended to do anything useful, it is
intended to be a simple example of an application's structure.
This application sends it's messages either as broadcast or
broadcast filtered group messages. The other (more normal)
message addressing is unicast. Most of the other sample
applications are written to support the unicast message model.
Key control:
SW1: Sends a flash command to all devices in Group 1.
SW2: Adds/Removes (toggles) this device in and out
of Group 1. This will enable and disable the
reception of the flash command.
*********************************************************************/
/*********************************************************************
* INCLUDES
*/
#include "OSAL.h"
#include "ZGlobals.h"
#include "AF.h"
#include "aps_groups.h"
#include "ZDApp.h"
#include "SampleApp.h"
#include "OnBoard.h"
/* HAL */
#include "hal_lcd.h"
#include "hal_led.h"
#include "hal_key.h"
#include "hal_uart.h"
/*********************************************************************
* MACROS
*/
#define LIGHT_PIN P2_0 //光敏传感器检测引脚
/*********************************************************************
* CONSTANTS
*/
/*********************************************************************
* TYPEDEFS
*/
/*********************************************************************
* GLOBAL VARIABLES
*/
// This list should be filled with Application specific Cluster IDs.
const cId_t SampleApp_ClusterList[SAMPLEAPP_MAX_CLUSTERS] =
{
SAMPLEAPP_DHT11_CLUSTERID,
};
const SimpleDescriptionFormat_t SampleApp_SimpleDesc =
{
SAMPLEAPP_ENDPOINT, // int Endpoint;
SAMPLEAPP_PROFID, // uint16 AppProfId[2];
SAMPLEAPP_DEVICEID, // uint16 AppDeviceId[2];
SAMPLEAPP_DEVICE_VERSION, // int AppDevVer:4;
SAMPLEAPP_FLAGS, // int AppFlags:4;
SAMPLEAPP_MAX_CLUSTERS, // uint8 AppNumInClusters;
(cId_t *)SampleApp_ClusterList, // uint8 *pAppInClusterList;
SAMPLEAPP_MAX_CLUSTERS, // uint8 AppNumInClusters;
(cId_t *)SampleApp_ClusterList // uint8 *pAppInClusterList;
};
// This is the Endpoint/Interface description. It is defined here, but
// filled-in in SampleApp_Init(). Another way to go would be to fill
// in the structure here and make it a "const" (in code space). The
// way it's defined in this sample app it is define in RAM.
endPointDesc_t SampleApp_epDesc;
/*********************************************************************
* EXTERNAL VARIABLES
*/
/*********************************************************************
* EXTERNAL FUNCTIONS
*/
/*********************************************************************
* LOCAL VARIABLES
*/
uint8 SampleApp_TaskID; // Task ID for internal task/event processing
// This variable will be received when
// SampleApp_Init() is called.
devStates_t SampleApp_NwkState;
uint8 SampleApp_TransID; // This is the unique message ID (counter)
afAddrType_t SampleApp_SensorGw_DstAddr;
uint8 SampleAppPeriodicCounter = 0;
/*********************************************************************
* LOCAL FUNCTIONS
*/
void SampleApp_HandleKeys( uint8 shift, uint8 keys );
void SampleApp_MessageMSGCB( afIncomingMSGPacket_t *pckt );
void SampleApp_SensorMessage( void );
void SerialCallback( uint8 port, uint8 events );
void UartSendNum( uint8 x );
/*********************************************************************
* NETWORK LAYER CALLBACKS
*/
/*********************************************************************
* PUBLIC FUNCTIONS
*/
/*********************************************************************
* @fn SampleApp_Init
*
* @brief Initialization function for the Generic App Task.
* This is called during initialization and should contain
* any application specific initialization (ie. hardware
* initialization/setup, table initialization, power up
* notificaiton ... ).
*
* @param task_id - the ID assigned by OSAL. This ID should be
* used to send messages and set timers.
*
* @return none
*/
void SampleApp_Init( uint8 task_id )
{
SampleApp_TaskID = task_id;
SampleApp_NwkState = DEV_INIT;
SampleApp_TransID = 0;
//串口初始化
UartInit(SerialCallback);
HalUARTWrite(0,"Hello World\n",12);
// Setup for the periodic message's destination address
SampleApp_SensorGw_DstAddr.addrMode = (afAddrMode_t)Addr16Bit;
SampleApp_SensorGw_DstAddr.endPoint = SAMPLEAPP_ENDPOINT;
SampleApp_SensorGw_DstAddr.addr.shortAddr = 0; //发送到协调器
// Fill out the endpoint description.
SampleApp_epDesc.endPoint = SAMPLEAPP_ENDPOINT;
SampleApp_epDesc.task_id = &SampleApp_TaskID;
SampleApp_epDesc.simpleDesc
= (SimpleDescriptionFormat_t *)&SampleApp_SimpleDesc;
SampleApp_epDesc.latencyReq = noLatencyReqs;
// Register the endpoint description with the AF
afRegister( &SampleApp_epDesc );
// Register for all key events - This app will handle all key events
RegisterForKeys( SampleApp_TaskID );
#if defined ( LCD_SUPPORTED )
HalLcdWriteString( "SampleApp", HAL_LCD_LINE_1 );
#endif
//IO Init P20
P2SEL &= ~0X01;
P2DIR &= ~0X01;
P2INP &= ~0x01;
}
/*********************************************************************
* @fn SampleApp_ProcessEvent
*
* @brief Generic Application Task event processor. This function
* is called to process all events for the task. Events
* include timers, messages and any other user defined events.
*
* @param task_id - The OSAL assigned task ID.
* @param events - events to process. This is a bit map and can
* contain more than one event.
*
* @return none
*/
uint16 SampleApp_ProcessEvent( uint8 task_id, uint16 events )
{
afIncomingMSGPacket_t *MSGpkt;
(void)task_id; // Intentionally unreferenced parameter
if ( events & SYS_EVENT_MSG )
{
MSGpkt = (afIncomingMSGPacket_t *)osal_msg_receive( SampleApp_TaskID );
while ( MSGpkt )
{
switch ( MSGpkt->hdr.event )
{
// Received when a key is pressed
case KEY_CHANGE:
SampleApp_HandleKeys( ((keyChange_t *)MSGpkt)->state, ((keyChange_t *)MSGpkt)->keys );
break;
// Received when a messages is received (OTA) for this endpoint
case AF_INCOMING_MSG_CMD:
SampleApp_MessageMSGCB( MSGpkt );
break;
// Received whenever the device changes state in the network
case ZDO_STATE_CHANGE:
SampleApp_NwkState = (devStates_t)(MSGpkt->hdr.status);
if (SampleApp_NwkState == DEV_ZB_COORD)
{
HalLcdWriteString( "Coordinate Start", HAL_LCD_LINE_1 );
}
else if(SampleApp_NwkState == DEV_ROUTER)
{
HalLcdWriteString( "Route Success to join the network", HAL_LCD_LINE_1 );
osal_start_timerEx( SampleApp_TaskID,SAMPLEAPP_SEND_PERIODIC_MSG_EVT,100 );
}
else if(SampleApp_NwkState == DEV_END_DEVICE)
{
HalLcdWriteString( "EndDevice Success to join the network", HAL_LCD_LINE_1 );
osal_start_timerEx( SampleApp_TaskID,SAMPLEAPP_SEND_PERIODIC_MSG_EVT,100 );
}
else
{
// Device is no longer in the network
osal_stop_timerEx( SampleApp_TaskID,SAMPLEAPP_SEND_PERIODIC_MSG_EVT);
}
break;
default:
break;
}
// Release the memory
osal_msg_deallocate( (uint8 *)MSGpkt );
// Next - if one is available
MSGpkt = (afIncomingMSGPacket_t *)osal_msg_receive( SampleApp_TaskID );
}
// return unprocessed events
return (events ^ SYS_EVENT_MSG);
}
if ( events & SAMPLEAPP_SEND_PERIODIC_MSG_EVT )
{
//读取传感器并发送
SampleApp_SensorMessage();
// Setup to send message again in normal period (+ a little jitter)
osal_start_timerEx( SampleApp_TaskID, SAMPLEAPP_SEND_PERIODIC_MSG_EVT,
(SAMPLEAPP_SEND_PERIODIC_MSG_TIMEOUT + (osal_rand() & 0x00FF)) );
// return unprocessed events
return (events ^ SAMPLEAPP_SEND_PERIODIC_MSG_EVT);
}
// Discard unknown events
return 0;
}
void UartSendNum( uint8 x )
{
uint8 buf[10];
buf[0] = x/100+'0';
buf[1] = x%100/10+'0';
buf[2] = x%10+'0';
HalUARTWrite(0,buf,3);
}
/*********************************************************************
* Event Generation Functions
*/
/*********************************************************************
* @fn SampleApp_HandleKeys
*
* @brief Handles all key events for this device.
*
* @param shift - true if in shift/alt.
* @param keys - bit field for key events. Valid entries:
* HAL_KEY_SW_2
* HAL_KEY_SW_1
*
* @return none
*/
void SampleApp_HandleKeys( uint8 shift, uint8 keys )
{
(void)shift; // Intentionally unreferenced parameter
if ( keys & HAL_KEY_SW_1 )
{
HalUARTWrite(0,"S1\n",3);
}
if ( keys & HAL_KEY_SW_2 )
{
HalUARTWrite(0,"S2\n",3);
}
}
/*********************************************************************
* LOCAL FUNCTIONS
*/
/*********************************************************************
* @fn SampleApp_MessageMSGCB
*
* @brief Data message processor callback. This function processes
* any incoming data - probably from other devices. So, based
* on cluster ID, perform the intended action.
*
* @param none
*
* @return none
*/
void SampleApp_MessageMSGCB( afIncomingMSGPacket_t *pkt )
{
HalUARTWrite(0,"Receive: ",9);
switch ( pkt->clusterId )
{
case SAMPLEAPP_DHT11_CLUSTERID:
HalUARTWrite(0,"temp = ",7);
UartSendNum( pkt->cmd.Data[0] );
HalUARTWrite(0," ℃ ",5);
HalUARTWrite(0,", ",2);
HalUARTWrite(0,"humidity = ",11);
UartSendNum( pkt->cmd.Data[1] );
HalUARTWrite(0,"%\n",2);
break;
case SAMPLEAPP_LIGHT_CLUSTERID:
if(pkt->cmd.Data[0])
{
HalLcdWriteString( "Got Light", HAL_LCD_LINE_3 );
}
else
{
HalLcdWriteString( "No Light", HAL_LCD_LINE_3 );
}
break;
}
}
/*********************************************************************
* @fn SampleApp_SensorMessage
*
* @brief Send the sensor message.
*
* @param none
*
* @return none
*/
void SampleApp_SensorMessage( void )
{
uint8 light;
if(LIGHT_PIN)
{
//无光
light = 0;
HalLcdWriteString( "No Light", HAL_LCD_LINE_3 ); //LCD
}
else
{
//有光
light = 1;
HalLcdWriteString( "Got Light", HAL_LCD_LINE_3 ); //LCD
}
if ( AF_DataRequest( &SampleApp_SensorGw_DstAddr, &SampleApp_epDesc,
SAMPLEAPP_LIGHT_CLUSTERID,
1,
&light,
&SampleApp_TransID,
AF_DISCV_ROUTE,
AF_DEFAULT_RADIUS ) == afStatus_SUCCESS )
{
}
else
{
// Error occurred in request to send.
}
}
void SerialCallback( uint8 port, uint8 events )
{
(void)port;
uint8 numBytes = 0;
uint8 buf[128];
if (events & HAL_UART_RX_TIMEOUT) //串口有数据
{
numBytes = Hal_UART_RxBufLen(0); //读出串口缓冲区有多少字节
if(numBytes)
{
//从串口缓冲区读出numBytes字节数据
HalUARTRead(0,buf,numBytes);
//把串口接收到的数据再打印出来
HalUARTWrite(0,buf,numBytes);
}
}
}
/*********************************************************************
*********************************************************************/
SampleApp.h
/**************************************************************************************************
Filename: SampleApp.h
Revised: $Date: 2007-10-27 17:22:23 -0700 (Sat, 27 Oct 2007) $
Revision: $Revision: 15795 $
Description: This file contains the Sample Application definitions.
Copyright 2007 Texas Instruments Incorporated. All rights reserved.
IMPORTANT: Your use of this Software is limited to those specific rights
granted under the terms of a software license agreement between the user
who downloaded the software, his/her employer (which must be your employer)
and Texas Instruments Incorporated (the "License"). You may not use this
Software unless you agree to abide by the terms of the License. The License
limits your use, and you acknowledge, that the Software may not be modified,
copied or distributed unless embedded on a Texas Instruments microcontroller
or used solely and exclusively in conjunction with a Texas Instruments radio
frequency transceiver, which is integrated into your product. Other than for
the foregoing purpose, you may not use, reproduce, copy, prepare derivative
works of, modify, distribute, perform, display or sell this Software and/or
its documentation for any purpose.
YOU FURTHER ACKNOWLEDGE AND AGREE THAT THE SOFTWARE AND DOCUMENTATION ARE
PROVIDED 揂S IS?WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY, TITLE,
NON-INFRINGEMENT AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL
TEXAS INSTRUMENTS OR ITS LICENSORS BE LIABLE OR OBLIGATED UNDER CONTRACT,
NEGLIGENCE, STRICT LIABILITY, CONTRIBUTION, BREACH OF WARRANTY, OR OTHER
LEGAL EQUITABLE THEORY ANY DIRECT OR INDIRECT DAMAGES OR EXPENSES
INCLUDING BUT NOT LIMITED TO ANY INCIDENTAL, SPECIAL, INDIRECT, PUNITIVE
OR CONSEQUENTIAL DAMAGES, LOST PROFITS OR LOST DATA, COST OF PROCUREMENT
OF SUBSTITUTE GOODS, TECHNOLOGY, SERVICES, OR ANY CLAIMS BY THIRD PARTIES
(INCLUDING BUT NOT LIMITED TO ANY DEFENSE THEREOF), OR OTHER SIMILAR COSTS.
Should you have any questions regarding your right to use this Software,
contact Texas Instruments Incorporated at www.TI.com.
**************************************************************************************************/
#ifndef SAMPLEAPP_H
#define SAMPLEAPP_H
#ifdef __cplusplus
extern "C"
{
#endif
/*********************************************************************
* INCLUDES
*/
#include "ZComDef.h"
/*********************************************************************
* CONSTANTS
*/
// These constants are only for example and should be changed to the
// device's needs
#define SAMPLEAPP_ENDPOINT 20
#define SAMPLEAPP_PROFID 0x0F08
#define SAMPLEAPP_DEVICEID 0x0001
#define SAMPLEAPP_DEVICE_VERSION 0
#define SAMPLEAPP_FLAGS 0
#define SAMPLEAPP_MAX_CLUSTERS 1
#define SAMPLEAPP_DHT11_CLUSTERID 10
#define SAMPLEAPP_LIGHT_CLUSTERID 11
// Send Message Timeout
#define SAMPLEAPP_SEND_PERIODIC_MSG_TIMEOUT 1000 // Every 5 seconds
// Application Events (OSAL) - These are bit weighted definitions.
#define SAMPLEAPP_SEND_PERIODIC_MSG_EVT 0x0001
// Group ID for Flash Command
#define SAMPLEAPP_FLASH_GROUP 0x0001
// Flash Command Duration - in milliseconds
#define SAMPLEAPP_FLASH_DURATION 1000
/*********************************************************************
* MACROS
*/
/*********************************************************************
* FUNCTIONS
*/
/*
* Task Initialization for the Generic Application
*/
extern void SampleApp_Init( uint8 task_id );
/*
* Task Event Processor for the Generic Application
*/
extern UINT16 SampleApp_ProcessEvent( uint8 task_id, uint16 events );
/*********************************************************************
*********************************************************************/
#ifdef __cplusplus
}
#endif
#endif /* SAMPLEAPP_H */
