版权声明：本文为博主原创文章，未经博主允许不得转载。 https://blog.csdn.net/YAOQINGGG/article/details/52155879
1.如果要查看zookeeper源码，可以以以下的方式启动
配置启动类：org.apache.zookeeper.server.quorum.QuorumPeerMain
配置一个启动参数：配置文件的地址
注意配置文件需要写清楚集群
# The number of milliseconds of each tick
tickTime=2000
# The number of ticks that the initial
# synchronization phase can take
initLimit=10
# The number of ticks that can pass between
# sending a request and getting an acknowledgement
syncLimit=5
# the directory where the snapshot is stored.
# do not use /tmp for storage, /tmp here is just
# example sakes.
dataDir=/Users/brady/my/zkdata
# the port at which the clients will connect
clientPort=2181
# the maximum number of client connections.
# increase this if you need to handle more clients
#maxClientCnxns=60
#
# Be sure to read the maintenance section of the
# administrator guide before turning on autopurge.
#
# http://zookeeper.apache.org/doc/current/zookeeperAdmin.html#sc_maintenance
#
# The number of snapshots to retain in dataDir
#autopurge.snapRetainCount=3
# Purge task interval in hours
# Set to "0" to disable auto purge feature
#autopurge.purgeInterval=1
server.1=localhost:2881:3881
server.2=localhost:2883:3883
server.3=192.168.0.104:2881:3881
2.源码解析
2.1 加载配置文件
public void runFromConfig(QuorumPeerConfig config) throws IOException {
try {
ManagedUtil.registerLog4jMBeans();
} catch (JMException e) {
LOG.warn("Unable to register log4j JMX control", e);
}
LOG.info("Starting quorum peer");
try {
ServerCnxnFactory cnxnFactory = ServerCnxnFactory.createFactory();
cnxnFactory.configure(config.getClientPortAddress(),
config.getMaxClientCnxns());
quorumPeer = new QuorumPeer();
quorumPeer.setClientPortAddress(config.getClientPortAddress());
quorumPeer.setTxnFactory(new FileTxnSnapLog(
new File(config.getDataLogDir()),
new File(config.getDataDir())));
quorumPeer.setQuorumPeers(config.getServers());
quorumPeer.setElectionType(config.getElectionAlg());
quorumPeer.setMyid(config.getServerId());
quorumPeer.setTickTime(config.getTickTime());
quorumPeer.setMinSessionTimeout(config.getMinSessionTimeout());
quorumPeer.setMaxSessionTimeout(config.getMaxSessionTimeout());
quorumPeer.setInitLimit(config.getInitLimit());
quorumPeer.setSyncLimit(config.getSyncLimit());
quorumPeer.setQuorumVerifier(config.getQuorumVerifier());
quorumPeer.setCnxnFactory(cnxnFactory);
quorumPeer.setZKDatabase(new ZKDatabase(quorumPeer.getTxnFactory()));
quorumPeer.setLearnerType(config.getPeerType());
quorumPeer.setSyncEnabled(config.getSyncEnabled());
quorumPeer.setQuorumListenOnAllIPs(config.getQuorumListenOnAllIPs());
quorumPeer.start();
quorumPeer.join();
} catch (InterruptedException e) {
// warn, but generally this is ok
LOG.warn("Quorum Peer interrupted", e);
}
}
@Override
public synchronized void start() {
loadDataBase(); // 加载dataDir里面的数据，比如zxid等
cnxnFactory.start(); // 启动监听端口线程，用来监听客户端的连接请求
startLeaderElection(); // 启动4个线程
super.start(); // 启动选举主流程，和选举出来leader之后的处理流程
}
注意startLeaderElection这个方法启动的四个线程：
senderWorker，如果集群有几台机器，就启动几个，用来操作IO，发送当前机器的选票
workerSender，是send业务处理线程。
workerRecever，用来解析收到的选票。
receiverWorker，用来处理Io。
@Override
public void run() {
setName("QuorumPeer" + "[myid=" + getId() + "]" +
cnxnFactory.getLocalAddress());
LOG.debug("Starting quorum peer");
try {
jmxQuorumBean = new QuorumBean(this);
MBeanRegistry.getInstance().register(jmxQuorumBean, null);
for(QuorumServer s: getView().values()){
ZKMBeanInfo p;
if (getId() == s.id) {
p = jmxLocalPeerBean = new LocalPeerBean(this);
try {
MBeanRegistry.getInstance().register(p, jmxQuorumBean);
} catch (Exception e) {
LOG.warn("Failed to register with JMX", e);
jmxLocalPeerBean = null;
}
} else {
p = new RemotePeerBean(s);
try {
MBeanRegistry.getInstance().register(p, jmxQuorumBean);
} catch (Exception e) {
LOG.warn("Failed to register with JMX", e);
}
}
}
} catch (Exception e) {
LOG.warn("Failed to register with JMX", e);
jmxQuorumBean = null;
}
try {
/*
* Main loop
*/
while (running) {
switch (getPeerState()) {
case LOOKING:
LOG.info("LOOKING");
if (Boolean.getBoolean("readonlymode.enabled")) {
LOG.info("Attempting to start ReadOnlyZooKeeperServer");
// Create read-only server but don't start it immediately
final ReadOnlyZooKeeperServer roZk = new ReadOnlyZooKeeperServer(
logFactory, this,
new ZooKeeperServer.BasicDataTreeBuilder(),
this.zkDb);
// Instead of starting roZk immediately, wait some grace
// period before we decide we're partitioned.
//
// Thread is used here because otherwise it would require
// changes in each of election strategy classes which is
// unnecessary code coupling.
Thread roZkMgr = new Thread() {
public void run() {
try {
// lower-bound grace period to 2 secs
sleep(Math.max(2000, tickTime));
if (ServerState.LOOKING.equals(getPeerState())) {
roZk.startup();
}
} catch (InterruptedException e) {
LOG.info("Interrupted while attempting to start ReadOnlyZooKeeperServer, not started");
} catch (Exception e) {
LOG.error("FAILED to start ReadOnlyZooKeeperServer", e);
}
}
};
try {
roZkMgr.start();
setBCVote(null);
setCurrentVote(makeLEStrategy().lookForLeader());
} catch (Exception e) {
LOG.warn("Unexpected exception",e);
setPeerState(ServerState.LOOKING);
} finally {
// If the thread is in the the grace period, interrupt
// to come out of waiting.
roZkMgr.interrupt();
roZk.shutdown();
}
} else {
try {
setBCVote(null);
setCurrentVote(makeLEStrategy().lookForLeader());//主线程在这儿选出leader
} catch (Exception e) {
LOG.warn("Unexpected exception", e);
setPeerState(ServerState.LOOKING);
}
}
break;
case OBSERVING:
try {
LOG.info("OBSERVING");
setObserver(makeObserver(logFactory));
observer.observeLeader();
} catch (Exception e) {
LOG.warn("Unexpected exception",e );
} finally {
observer.shutdown();
setObserver(null);
setPeerState(ServerState.LOOKING);
}
break;
case FOLLOWING:
try {
LOG.info("FOLLOWING");
setFollower(makeFollower(logFactory));
follower.followLeader();
} catch (Exception e) {
LOG.warn("Unexpected exception",e);
} finally {
follower.shutdown();
setFollower(null);
setPeerState(ServerState.LOOKING);
}
break;
case LEADING:
LOG.info("LEADING");
try {
setLeader(makeLeader(logFactory));
leader.lead();
setLeader(null);
} catch (Exception e) {
LOG.warn("Unexpected exception",e);
} finally {
if (leader != null) {
leader.shutdown("Forcing shutdown");
setLeader(null);
}
setPeerState(ServerState.LOOKING);
}
break;
}
}
} finally {
LOG.warn("QuorumPeer main thread exited");
try {
MBeanRegistry.getInstance().unregisterAll();
} catch (Exception e) {
LOG.warn("Failed to unregister with JMX", e);
}
jmxQuorumBean = null;
jmxLocalPeerBean = null;
}
}
public Vote lookForLeader() throws InterruptedException {
try {
self.jmxLeaderElectionBean = new LeaderElectionBean();
MBeanRegistry.getInstance().register(
self.jmxLeaderElectionBean, self.jmxLocalPeerBean);
} catch (Exception e) {
LOG.warn("Failed to register with JMX", e);
self.jmxLeaderElectionBean = null;
}
if (self.start_fle == 0) {
self.start_fle = System.currentTimeMillis();
}
try {
HashMap<Long, Vote> recvset = new HashMap<Long, Vote>();
HashMap<Long, Vote> outofelection = new HashMap<Long, Vote>();
int notTimeout = finalizeWait;
synchronized(this){
logicalclock++;//逻辑时钟，当前轮次
updateProposal(getInitId(), getInitLastLoggedZxid(), getPeerEpoch());
}
LOG.info("New election. My id = " + self.getId() +
", proposed zxid=0x" + Long.toHexString(proposedZxid));
sendNotifications();
/*
* Loop in which we exchange notifications until we find a leader
*/
while ((self.getPeerState() == ServerState.LOOKING) &&
(!stop)){
/*
* Remove next notification from queue, times out after 2 times
* the termination time
*/
Notification n = recvqueue.poll(notTimeout,
TimeUnit.MILLISECONDS); //从接收队列取选票
/*
* Sends more notifications if haven't received enough.
* Otherwise processes new notification.
*/
if(n == null){
if(manager.haveDelivered()){
sendNotifications(); //如果选票都发出去了，没有收到回应，继续发
} else {
manager.connectAll(); //连接其它服务器（在workerSender里面有一个连接的动作）
}
/*
* Exponential backoff
*/
int tmpTimeOut = notTimeout*2;
notTimeout = (tmpTimeOut < maxNotificationInterval?
tmpTimeOut : maxNotificationInterval);
LOG.info("Notification time out: " + notTimeout);
}
else if(self.getVotingView().containsKey(n.sid)) {
/*
* Only proceed if the vote comes from a replica in the
* voting view.
*/
switch (n.state) {
case LOOKING:
// If notification > current, replace and send messages out
if (n.electionEpoch > logicalclock) {
logicalclock = n.electionEpoch;
recvset.clear();
if(totalOrderPredicate(n.leader, n.zxid, n.peerEpoch,
getInitId(), getInitLastLoggedZxid(), getPeerEpoch())) {
updateProposal(n.leader, n.zxid, n.peerEpoch);
} else {
updateProposal(getInitId(),
getInitLastLoggedZxid(),
getPeerEpoch());
}
sendNotifications();
} else if (n.electionEpoch < logicalclock) {
if(LOG.isDebugEnabled()){
LOG.debug("Notification election epoch is smaller than logicalclock. n.electionEpoch = 0x"
+ Long.toHexString(n.electionEpoch)
+ ", logicalclock=0x" + Long.toHexString(logicalclock));
}
break;
} else if (totalOrderPredicate(n.leader, n.zxid, n.peerEpoch, // 判断是否要更新自己的选票
proposedLeader, proposedZxid, proposedEpoch)) {
updateProposal(n.leader, n.zxid, n.peerEpoch); // 更新自己的选票
sendNotifications(); // 发送自己的选票
}
if(LOG.isDebugEnabled()){
LOG.debug("Adding vote: from=" + n.sid +
", proposed leader=" + n.leader +
", proposed zxid=0x" + Long.toHexString(n.zxid) +
", proposed election epoch=0x" + Long.toHexString(n.electionEpoch));
}
recvset.put(n.sid, new Vote(n.leader, n.zxid, n.electionEpoch, n.peerEpoch)); // 将各台服务器的选票放入set里面
if (termPredicate(recvset,
new Vote(proposedLeader, proposedZxid,
logicalclock, proposedEpoch))) { // 查看是否有过半的机器是否是同一张选票
// Verify if there is any change in the proposed leader
while((n = recvqueue.poll(finalizeWait,
TimeUnit.MILLISECONDS)) != null){// 接着从接受队列里面取，等待200ms
if(totalOrderPredicate(n.leader, n.zxid, n.peerEpoch,
proposedLeader, proposedZxid, proposedEpoch)){// 说明有更好的选票，放入set，从头开始循环
recvqueue.put(n);
break;
}
}
/*
* This predicate is true once we don't read any new
* relevant message from the reception queue
*/
if (n == null) { //如果200ms之后没有选票了，说明当前的选票是leader信息
self.setPeerState((proposedLeader == self.getId()) ?
ServerState.LEADING: learningState());//当前机器是否是leader
Vote endVote = new Vote(proposedLeader,
proposedZxid,
logicalclock,
proposedEpoch);
leaveInstance(endVote);
return endVote;
}
}
break;
case OBSERVING:
LOG.debug("Notification from observer: " + n.sid);
break;
case FOLLOWING:
case LEADING:
/*
* Consider all notifications from the same epoch
* together.
*/
if(n.electionEpoch == logicalclock){
recvset.put(n.sid, new Vote(n.leader,
n.zxid,
n.electionEpoch,
n.peerEpoch));
if(ooePredicate(recvset, outofelection, n)) {
self.setPeerState((n.leader == self.getId()) ?
ServerState.LEADING: learningState());
Vote endVote = new Vote(n.leader,
n.zxid,
n.electionEpoch,
n.peerEpoch);
leaveInstance(endVote);
return endVote;
}
}
/*
* Before joining an established ensemble, verify
* a majority is following the same leader.
*/
outofelection.put(n.sid, new Vote(n.version,
n.leader,
n.zxid,
n.electionEpoch,
n.peerEpoch,
n.state));
if(ooePredicate(outofelection, outofelection, n)) {
synchronized(this){
logicalclock = n.electionEpoch;
self.setPeerState((n.leader == self.getId()) ?
ServerState.LEADING: learningState());
}
Vote endVote = new Vote(n.leader,
n.zxid,
n.electionEpoch,
n.peerEpoch);
leaveInstance(endVote);
return endVote;
}
break;
default:
LOG.warn("Notification state unrecognized: {} (n.state), {} (n.sid)",
n.state, n.sid);
break;
}
} else {
LOG.warn("Ignoring notification from non-cluster member " + n.sid);
}
}
return null;
} finally {
try {
if(self.jmxLeaderElectionBean != null){
MBeanRegistry.getInstance().unregister(
self.jmxLeaderElectionBean);
}
} catch (Exception e) {
LOG.warn("Failed to unregister with JMX", e);
}
self.jmxLeaderElectionBean = null;
}
}