搜了好多，都没有看到关于下拉组件带图标的生成方法，最后在老外的帮助下总算弄成功了。记录一下，造福大家啊。
作为对比，原始的dropdown是这样的：
直接把图片（包括sprite格式的）往上图中的Caption image和item image中托是拖不了的，他们只接受hierarchy中的物体，所以你必须先在hierarchy中新建image UI然后把图片拖动到这个UI上，然后才能给Caption image和item image赋image即把这个带图片的image UI拖过去。
option A就是dropdown中的label，一般人没想到的是它能移动位置，且要加图必要先移动它到右侧（当然你如果想把logo加到右侧或中间的话，你就不移动也行，）
Caption image和item image都不是dropdown自带的，需要自己新建和设计位置。一个全新的dropdown如下图
外观展开如下（template勾选起来就展开了）；
以上是原始dropdown的研究，接下来进入重点。重要的就是Options,可是我加了照片就是不显示，各个项目的文字倒是正常，后来才知道是两个地方没有设计的缘故。
caption image和item image要有图片才行
而他们两个的位置是自己放好的。caption image是独立于dropdown组件的，需要自己建立。新建UI中的image,命名为caption image（随意），并调整位置和大小放到dropdown的文字的左侧的某个位置，不要太左了，因那边还要显示对勾呢（对勾是自动生成的我们不用管，默认在每个选项的最左侧，你选了谁，谁左侧就会有对勾，没选的没有对勾），然后拖到上图中的相应位置。
然后是放item image，也需要自己建，位置比较隐蔽，在下面的位置建：
默认是隐藏不显示的，如果你要添加，也需要设计，我们把template勾选上，让他们显示出来，如下：
是不是dropdown里的内容就平铺开来了，选择跟caption image同样的那个图，拖到source image中就行，是同样的那个图，不是物件caption image啊，不要搞错了，item第一项和caption所用的图必须是同一个，然后开头option中其它项才会依次正确关联，另外这个图的位置也是自己摆放的，最好根据你的caption image摆放的位置调整。然后将你自己建的Caption image和item image项拖到dropdown的inspector中相应的位置，如下图，这样就大功告成了。
总结一句就是：Caption image和item image需要另外建，且注意位置，dropdown只有拥有了这两个物体，option中的附图才会实际显示。
所有图片在一起
下面这个texture type更改图片格式，我这里为了方便都把原来的jpg改选成sprite了。
效果如下（黑块是其它物体干涉遮挡了，正常效果没有它的）：
最后附上动态交互的代码（相关的看一下，不相关的不用管它）
using System.Collections;
using System.Collections.Generic;
using UnityEngine;
using UnityEngine.UI;
public class DropdownControl : MonoBehaviour
{
public GameObject tooltip, tooltip1, tooltip2, tooltip3, tooltip4, tooltip5;
GameObject clonescrewH, clonescrewV;
GameObject clonescrew1H, clonescrew1V;
GameObject clonescrew2H, clonescrew2V;
GameObject clonescrew3H, clonescrew3V;
GameObject clonescrew4H, clonescrew4V;
GameObject clonescrew5H, clonescrew5V;
Dropdown dropDownItem;
int curInterval = 0;
int interval = 8;//要小于CTPlane的更新间隔。否则复制的cylinder方位不对，不是移动后在CT view上的方位，而只是初始状态。
bool allflag=false,updateflag = false, updateflag1 = false, updateflag2 = false, updateflag3 = false, updateflag4 = false, updateflag5 = false;
public void onselectitem()
{
Sprite tempimage;
float x, y, z,rx,ry,rz;
dropDownItem = this.GetComponent<Dropdown>();
int index = dropDownItem.value;//选中的项的索引号
// Debug.Log(dropDownItem.options[index].text);//输出options相应选择项的名字
switch (index)
{
case 0:
/*tempimage = dropDownItem.options[index].image;
dropDownItem.options[index].image = dropDownItem.options[5].image;
dropDownItem.options[5].image = tempimage;//两个图标交换,以达到把不用的图标放到最后面的效果*/
GameObject.Find("Probe").GetComponent<Renderer>().material.color = Color.yellow;
GameObject.Find("CTPlanes/CTPlane1/ScrewHview").GetComponent<Renderer>().material.color = Color.yellow;
GameObject.Find("CTPlanes/CTPlane2/ScrewVview").GetComponent<Renderer>().material.color = Color.yellow;
Debug.Log("color change is ok");
x =GameObject.FindGameObjectWithTag("Screw1").transform.position.x;
y= GameObject.FindGameObjectWithTag("Screw1").transform.position.y;
z = GameObject.FindGameObjectWithTag("Screw1").transform.position.z;
rx = GameObject.FindGameObjectWithTag("Screw1").transform.eulerAngles.x;//.rotation.x;
ry = GameObject.FindGameObjectWithTag("Screw1").transform.eulerAngles.y;
rz = GameObject.FindGameObjectWithTag("Screw1").transform.eulerAngles.z;
GameObject.Find("Probe").transform.position = new Vector3(x,y,z);
GameObject.Find("Probe").transform.eulerAngles= new Vector3(rx, ry, rz);
Debug.Log("0 is Screw A");
break;
case 1:
GameObject.Find("Probe").GetComponent<Renderer>().material.color = Color.green;
GameObject.Find("CTPlanes/CTPlane1/ScrewHview").GetComponent<Renderer>().material.color = Color.green;
GameObject.Find("CTPlanes/CTPlane2/ScrewVview").GetComponent<Renderer>().material.color = Color.green;
Debug.Log("color change is ok");
x = GameObject.FindGameObjectWithTag("Screw2").transform.position.x;
y = GameObject.FindGameObjectWithTag("Screw2").transform.position.y;
z = GameObject.FindGameObjectWithTag("Screw2").transform.position.z;
rx = GameObject.FindGameObjectWithTag("Screw2").transform.eulerAngles.x;//.rotation.x;
ry = GameObject.FindGameObjectWithTag("Screw2").transform.eulerAngles.y;
rz = GameObject.FindGameObjectWithTag("Screw2").transform.eulerAngles.z;
GameObject.Find("Probe").transform.position = new Vector3(x, y, z);
GameObject.Find("Probe").transform.eulerAngles = new Vector3(rx, ry, rz);
GameObject.FindGameObjectWithTag("Length").GetComponent<Text>().text = "10";
GameObject.FindGameObjectWithTag("diameter").GetComponent< Text >().text="5";
Debug.Log("1 is Screw B");
break;
case 2:
GameObject.Find("Probe").GetComponent<Renderer>().material.color = Color.red;
GameObject.Find("CTPlanes/CTPlane1/ScrewHview").GetComponent<Renderer>().material.color = Color.red;
GameObject.Find("CTPlanes/CTPlane2/ScrewVview").GetComponent<Renderer>().material.color = Color.red;
x = GameObject.FindGameObjectWithTag("Screw3").transform.position.x;
y = GameObject.FindGameObjectWithTag("Screw3").transform.position.y;
z = GameObject.FindGameObjectWithTag("Screw3").transform.position.z;
rx = GameObject.FindGameObjectWithTag("Screw3").transform.eulerAngles.x;//.rotation.x;
ry = GameObject.FindGameObjectWithTag("Screw3").transform.eulerAngles.y;
rz = GameObject.FindGameObjectWithTag("Screw3").transform.eulerAngles.z;
GameObject.Find("Probe").transform.position = new Vector3(x, y, z);
GameObject.Find("Probe").transform.eulerAngles = new Vector3(rx, ry, rz);
GameObject.FindGameObjectWithTag("Length").GetComponent<Text>().text = "11";
GameObject.FindGameObjectWithTag("diameter").GetComponent<Text>().text = "7";
Debug.Log("2 is Screw C");
break;
case 3:
GameObject.Find("Probe").GetComponent<Renderer>().material.color = new Color(254, 0, 254);
GameObject.Find("CTPlanes/CTPlane1/ScrewHview").GetComponent<Renderer>().material.color = new Color(254,0,254);//pink
GameObject.Find("CTPlanes/CTPlane2/ScrewVview").GetComponent<Renderer>().material.color = new Color(254,0,254);//pink
x = GameObject.FindGameObjectWithTag("Screw4").transform.position.x;
y = GameObject.FindGameObjectWithTag("Screw4").transform.position.y;
z = GameObject.FindGameObjectWithTag("Screw4").transform.position.z;
rx = GameObject.FindGameObjectWithTag("Screw4").transform.eulerAngles.x;//.rotation.x;
ry = GameObject.FindGameObjectWithTag("Screw4").transform.eulerAngles.y;
rz = GameObject.FindGameObjectWithTag("Screw4").transform.eulerAngles.z;
GameObject.Find("Probe").transform.position = new Vector3(x, y, z);
GameObject.Find("Probe").transform.eulerAngles = new Vector3(rx, ry, rz);
GameObject.FindGameObjectWithTag("Length").GetComponent<Text>().text = "10";
GameObject.FindGameObjectWithTag("diameter").GetComponent<Text>().text = "6";
Debug.Log("3 is Screw D");
break;
case 4:
GameObject.Find("Probe").GetComponent<Renderer>().material.color = Color.white;
GameObject.Find("CTPlanes/CTPlane1/ScrewHview").GetComponent<Renderer>().material.color = Color.white;
GameObject.Find("CTPlanes/CTPlane2/ScrewVview").GetComponent<Renderer>().material.color = Color.white;
x = GameObject.FindGameObjectWithTag("Screw5").transform.position.x;
y = GameObject.FindGameObjectWithTag("Screw5").transform.position.y;
z = GameObject.FindGameObjectWithTag("Screw5").transform.position.z;
rx = GameObject.FindGameObjectWithTag("Screw5").transform.eulerAngles.x;//.rotation.x;
ry = GameObject.FindGameObjectWithTag("Screw5").transform.eulerAngles.y;
rz = GameObject.FindGameObjectWithTag("Screw5").transform.eulerAngles.z;
GameObject.Find("Probe").transform.position = new Vector3(x, y, z);
GameObject.Find("Probe").transform.eulerAngles = new Vector3(rx, ry, rz);
GameObject.FindGameObjectWithTag("Length").GetComponent<Text>().text = "9";
GameObject.FindGameObjectWithTag("diameter").GetComponent<Text>().text = "5";
Debug.Log("4 is Screw E");
break;
case 5:
GameObject.Find("Probe").GetComponent<Renderer>().material.color = Color.cyan;
GameObject.Find("CTPlanes/CTPlane1/ScrewHview").GetComponent<Renderer>().material.color = Color.cyan;
GameObject.Find("CTPlanes/CTPlane2/ScrewVview").GetComponent<Renderer>().material.color = Color.cyan;
x = GameObject.FindGameObjectWithTag("Screw6").transform.position.x;
y = GameObject.FindGameObjectWithTag("Screw6").transform.position.y;
z = GameObject.FindGameObjectWithTag("Screw6").transform.position.z;
rx = GameObject.FindGameObjectWithTag("Screw6").transform.eulerAngles.x;//.rotation.x;
ry = GameObject.FindGameObjectWithTag("Screw6").transform.eulerAngles.y;
rz = GameObject.FindGameObjectWithTag("Screw6").transform.eulerAngles.z;
GameObject.Find("Probe").transform.position = new Vector3(x, y, z);
GameObject.Find("Probe").transform.eulerAngles = new Vector3(rx, ry, rz);
GameObject.FindGameObjectWithTag("Length").GetComponent<Text>().text = "12";
GameObject.FindGameObjectWithTag("diameter").GetComponent<Text>().text = "6";
Debug.Log("5 is Screw F");
break;
case 6:
allflag = true;
break;
case 7:
allflag = false;
GameObject.Destroy(clonescrewH);
GameObject.Destroy(clonescrew1H);
GameObject.Destroy(clonescrew2H);
GameObject.Destroy(clonescrew3H);
GameObject.Destroy(clonescrew4H);
GameObject.Destroy(clonescrew5H);
GameObject.Destroy(clonescrewV);
GameObject.Destroy(clonescrew1V);
GameObject.Destroy(clonescrew2V);
GameObject.Destroy(clonescrew3V);
GameObject.Destroy(clonescrew4V);
GameObject.Destroy(clonescrew5V);
GameObject.Find("Probe2").transform.position = new Vector3(0.2f, 0, 0);
GameObject.Find("Probe2").transform.eulerAngles = new Vector3(0, 0, 0);//还原利用过的probe2
GameObject.Find("CTPlanes/CTPlane1/ScrewHview2").transform.localPosition= new Vector3(0, 1.2f, 0);
GameObject.Find("CTPlanes/CTPlane1/ScrewHview2").transform.localEulerAngles= new Vector3(0, 0, 0);//要还原以备主流应用，否则以screw6的姿势贴在CT Hview上了
GameObject.Find("CTPlanes/CTPlane2/ScrewVview2").transform.localPosition = new Vector3(0, 1.2f, 0);
GameObject.Find("CTPlanes/CTPlane2/ScrewVview2").transform.localEulerAngles= new Vector3(0, 0, 0);//要还原以备主流应用，否则以screw6的姿势贴在CT Vview上了
GameObject.FindGameObjectWithTag("Screw1").GetComponent<MeshRenderer>().enabled = false;
GameObject.FindGameObjectWithTag("Screw2").GetComponent<MeshRenderer>().enabled = false;
GameObject.FindGameObjectWithTag("Screw3").GetComponent<MeshRenderer>().enabled = false;
GameObject.FindGameObjectWithTag("Screw4").GetComponent<MeshRenderer>().enabled = false;
GameObject.FindGameObjectWithTag("Screw5").GetComponent<MeshRenderer>().enabled = false;
GameObject.FindGameObjectWithTag("Screw6").GetComponent<MeshRenderer>().enabled = false;
tooltip.SetActive(false);
tooltip1.SetActive(false);
tooltip2.SetActive(false);
tooltip3.SetActive(false);
tooltip4.SetActive(false);
tooltip5.SetActive(false);
break;
default:
break;
}
}
private void Update()
{
if (allflag)
{
if (!updateflag)
{
float x, y, z, rx, ry, rz;
GameObject.Find("CTPlanes/CTPlane1/ScrewHview2").GetComponent<Renderer>().material.color = Color.yellow;
GameObject.Find("CTPlanes/CTPlane2/ScrewVview2").GetComponent<Renderer>().material.color = Color.yellow;
x = GameObject.FindGameObjectWithTag("Screw1").transform.position.x;
y = GameObject.FindGameObjectWithTag("Screw1").transform.position.y;
z = GameObject.FindGameObjectWithTag("Screw1").transform.position.z;
rx = GameObject.FindGameObjectWithTag("Screw1").transform.eulerAngles.x;//.rotation.x;
ry = GameObject.FindGameObjectWithTag("Screw1").transform.eulerAngles.y;
rz = GameObject.FindGameObjectWithTag("Screw1").transform.eulerAngles.z;
GameObject.Find("Probe2").transform.position = new Vector3(x, y, z);
GameObject.Find("Probe2").transform.eulerAngles = new Vector3(rx, ry, rz);
GameObject.FindGameObjectWithTag("Screw1").GetComponent<MeshRenderer>().enabled = true;//渲染以显示screw1
GameObject.FindGameObjectWithTag("Screw1").GetComponent<Renderer>().material.color = Color.yellow;
tooltip.SetActive(true);
if (++curInterval < interval)
{
return;
}
curInterval = 0;
//查找对象
GameObject ScrewObj = GameObject.Find("CTPlanes/CTPlane1/ScrewHview2");
clonescrewH = Instantiate(ScrewObj);
clonescrewH.transform.SetParent(GameObject.Find("CTPlanes/CTPlane1").transform);
clonescrewH.transform.localPosition = GameObject.Find("CTPlanes/CTPlane1/ScrewHview2").transform.localPosition;
clonescrewH.transform.localRotation = GameObject.Find("CTPlanes/CTPlane1/ScrewHview2").transform.localRotation;
clonescrewH.transform.localScale = GameObject.Find("CTPlanes/CTPlane1/ScrewHview2").transform.localScale;
clonescrewH.GetComponent<Renderer>().material.color = Color.yellow;
clonescrewH.name = ("clone1H");
ScrewObj = GameObject.Find("CTPlanes/CTPlane2/ScrewVview2");
clonescrewV = Instantiate(ScrewObj);
clonescrewV.transform.SetParent(GameObject.Find("CTPlanes/CTPlane2").transform);
clonescrewV.transform.localPosition = GameObject.Find("CTPlanes/CTPlane2/ScrewVview2").transform.localPosition;
clonescrewV.transform.localRotation = GameObject.Find("CTPlanes/CTPlane2/ScrewVview2").transform.localRotation;
clonescrewV.transform.localScale = GameObject.Find("CTPlanes/CTPlane2/ScrewVview2").transform.localScale;
clonescrewV.GetComponent<Renderer>().material.color = Color.yellow;
clonescrewV.name = ("clone1V");
updateflag = true;//只更新一次
}
if (!updateflag1)
{
float x, y, z, rx, ry, rz;
GameObject.Find("CTPlanes/CTPlane1/ScrewHview2").GetComponent<Renderer>().material.color = Color.green;
GameObject.Find("CTPlanes/CTPlane2/ScrewVview2").GetComponent<Renderer>().material.color = Color.green;
x = GameObject.FindGameObjectWithTag("Screw2").transform.position.x;
y = GameObject.FindGameObjectWithTag("Screw2").transform.position.y;
z = GameObject.FindGameObjectWithTag("Screw2").transform.position.z;
rx = GameObject.FindGameObjectWithTag("Screw2").transform.eulerAngles.x;//.rotation.x;
ry = GameObject.FindGameObjectWithTag("Screw2").transform.eulerAngles.y;
rz = GameObject.FindGameObjectWithTag("Screw2").transform.eulerAngles.z;
GameObject.Find("Probe2").transform.position = new Vector3(x, y, z);
GameObject.Find("Probe2").transform.eulerAngles = new Vector3(rx, ry, rz);
GameObject.FindGameObjectWithTag("Screw2").GetComponent<MeshRenderer>().enabled = true;//渲染以显示screw2
GameObject.FindGameObjectWithTag("Screw2").GetComponent<Renderer>().material.color = Color.green;
tooltip1.SetActive(true);
if (++curInterval < interval)
{
return;
}
curInterval = 0;
//查找对象
GameObject ScrewObj = GameObject.Find("CTPlanes/CTPlane1/ScrewHview2");
clonescrew1H = Instantiate(ScrewObj);
clonescrew1H.transform.SetParent(GameObject.Find("CTPlanes/CTPlane1").transform);
clonescrew1H.transform.localPosition = GameObject.Find("CTPlanes/CTPlane1/ScrewHview2").transform.localPosition;
clonescrew1H.transform.localRotation = GameObject.Find("CTPlanes/CTPlane1/ScrewHview2").transform.localRotation;
clonescrew1H.transform.localScale = GameObject.Find("CTPlanes/CTPlane1/ScrewHview2").transform.localScale;
clonescrew1H.GetComponent<Renderer>().material.color = Color.green;
clonescrew1H.name = ("clone2H");
ScrewObj = GameObject.Find("CTPlanes/CTPlane2/ScrewVview2");
clonescrew1V = Instantiate(ScrewObj);
clonescrew1V.transform.SetParent(GameObject.Find("CTPlanes/CTPlane2").transform);
clonescrew1V.transform.localPosition = GameObject.Find("CTPlanes/CTPlane2/ScrewVview2").transform.localPosition;
clonescrew1V.transform.localRotation = GameObject.Find("CTPlanes/CTPlane2/ScrewVview2").transform.localRotation;
clonescrew1V.transform.localScale = GameObject.Find("CTPlanes/CTPlane2/ScrewVview2").transform.localScale;
clonescrew1V.GetComponent<Renderer>().material.color = Color.green;
clonescrew1V.name = ("clone2V");
updateflag1 = true;//只更新一次
}
if (!updateflag2)
{
float x, y, z, rx, ry, rz;
GameObject.Find("CTPlanes/CTPlane1/ScrewHview2").GetComponent<Renderer>().material.color = Color.red;
GameObject.Find("CTPlanes/CTPlane2/ScrewVview2").GetComponent<Renderer>().material.color = Color.red;
x = GameObject.FindGameObjectWithTag("Screw3").transform.position.x;
y = GameObject.FindGameObjectWithTag("Screw3").transform.position.y;
z = GameObject.FindGameObjectWithTag("Screw3").transform.position.z;
rx = GameObject.FindGameObjectWithTag("Screw3").transform.eulerAngles.x;//.rotation.x;
ry = GameObject.FindGameObjectWithTag("Screw3").transform.eulerAngles.y;
rz = GameObject.FindGameObjectWithTag("Screw3").transform.eulerAngles.z;
GameObject.Find("Probe2").transform.position = new Vector3(x, y, z);
GameObject.Find("Probe2").transform.eulerAngles = new Vector3(rx, ry, rz);
GameObject.FindGameObjectWithTag("Screw3").GetComponent<MeshRenderer>().enabled = true;//渲染以显示screw3
GameObject.FindGameObjectWithTag("Screw3").GetComponent<Renderer>().material.color = Color.red;
tooltip2.SetActive(true);
if (++curInterval < interval)
{
return;
}
curInterval = 0;
//查找对象
GameObject ScrewObj = GameObject.Find("CTPlanes/CTPlane1/ScrewHview2");
clonescrew2H = Instantiate(ScrewObj);
clonescrew2H.transform.SetParent(GameObject.Find("CTPlanes/CTPlane1").transform);
clonescrew2H.transform.localPosition = GameObject.Find("CTPlanes/CTPlane1/ScrewHview2").transform.localPosition;
clonescrew2H.transform.localRotation = GameObject.Find("CTPlanes/CTPlane1/ScrewHview2").transform.localRotation;
clonescrew2H.transform.localScale = GameObject.Find("CTPlanes/CTPlane1/ScrewHview2").transform.localScale;
clonescrew2H.GetComponent<Renderer>().material.color = Color.red;
ScrewObj = GameObject.Find("CTPlanes/CTPlane2/ScrewVview2");
clonescrew2V = Instantiate(ScrewObj);
clonescrew2V.transform.SetParent(GameObject.Find("CTPlanes/CTPlane2").transform);
clonescrew2V.transform.localPosition = GameObject.Find("CTPlanes/CTPlane2/ScrewVview2").transform.localPosition;
clonescrew2V.transform.localRotation = GameObject.Find("CTPlanes/CTPlane2/ScrewVview2").transform.localRotation;
clonescrew2V.transform.localScale = GameObject.Find("CTPlanes/CTPlane2/ScrewVview2").transform.localScale;
clonescrew2V.GetComponent<Renderer>().material.color = Color.red;
updateflag2 = true;//只更新一次
}
if (!updateflag3)
{
float x, y, z, rx, ry, rz;
GameObject.Find("CTPlanes/CTPlane1/ScrewHview2").GetComponent<Renderer>().material.color = new Color(254, 0, 254);
GameObject.Find("CTPlanes/CTPlane2/ScrewVview2").GetComponent<Renderer>().material.color = new Color(254, 0, 254);
x = GameObject.FindGameObjectWithTag("Screw4").transform.position.x;
y = GameObject.FindGameObjectWithTag("Screw4").transform.position.y;
z = GameObject.FindGameObjectWithTag("Screw4").transform.position.z;
rx = GameObject.FindGameObjectWithTag("Screw4").transform.eulerAngles.x;//.rotation.x;
ry = GameObject.FindGameObjectWithTag("Screw4").transform.eulerAngles.y;
rz = GameObject.FindGameObjectWithTag("Screw4").transform.eulerAngles.z;
GameObject.Find("Probe2").transform.position = new Vector3(x, y, z);
GameObject.Find("Probe2").transform.eulerAngles = new Vector3(rx, ry, rz);
GameObject.FindGameObjectWithTag("Screw4").GetComponent<MeshRenderer>().enabled = true;//渲染以显示screw4
GameObject.FindGameObjectWithTag("Screw4").GetComponent<Renderer>().material.color = new Color(254, 0, 254);
tooltip3.SetActive(true);
if (++curInterval < interval)
{
return;
}
curInterval = 0;
//查找对象
GameObject ScrewObj = GameObject.Find("CTPlanes/CTPlane1/ScrewHview2");
clonescrew3H = Instantiate(ScrewObj);
clonescrew3H.transform.SetParent(GameObject.Find("CTPlanes/CTPlane1").transform);
clonescrew3H.transform.localPosition = GameObject.Find("CTPlanes/CTPlane1/ScrewHview2").transform.localPosition;
clonescrew3H.transform.localRotation = GameObject.Find("CTPlanes/CTPlane1/ScrewHview2").transform.localRotation;
clonescrew3H.transform.localScale = GameObject.Find("CTPlanes/CTPlane1/ScrewHview2").transform.localScale;
clonescrew3H.GetComponent<Renderer>().material.color = new Color(254, 0, 254);
ScrewObj = GameObject.Find("CTPlanes/CTPlane2/ScrewVview2");
clonescrew3V = Instantiate(ScrewObj);
clonescrew3V.transform.SetParent(GameObject.Find("CTPlanes/CTPlane2").transform);
clonescrew3V.transform.localPosition = GameObject.Find("CTPlanes/CTPlane2/ScrewVview2").transform.localPosition;
clonescrew3V.transform.localRotation = GameObject.Find("CTPlanes/CTPlane2/ScrewVview2").transform.localRotation;
clonescrew3V.transform.localScale = GameObject.Find("CTPlanes/CTPlane2/ScrewVview2").transform.localScale;
clonescrew3V.GetComponent<Renderer>().material.color = new Color(254, 0, 254);
updateflag3 = true;//只更新一次
}
if (!updateflag4)
{
float x, y, z, rx, ry, rz;
GameObject.Find("CTPlanes/CTPlane1/ScrewHview2").GetComponent<Renderer>().material.color = Color.white;
GameObject.Find("CTPlanes/CTPlane2/ScrewVview2").GetComponent<Renderer>().material.color = Color.white;
x = GameObject.FindGameObjectWithTag("Screw5").transform.position.x;
y = GameObject.FindGameObjectWithTag("Screw5").transform.position.y;
z = GameObject.FindGameObjectWithTag("Screw5").transform.position.z;
rx = GameObject.FindGameObjectWithTag("Screw5").transform.eulerAngles.x;//.rotation.x;
ry = GameObject.FindGameObjectWithTag("Screw5").transform.eulerAngles.y;
rz = GameObject.FindGameObjectWithTag("Screw5").transform.eulerAngles.z;
GameObject.Find("Probe2").transform.position = new Vector3(x, y, z);
GameObject.Find("Probe2").transform.eulerAngles = new Vector3(rx, ry, rz);
GameObject.FindGameObjectWithTag("Screw5").GetComponent<MeshRenderer>().enabled = true;//渲染以显示screw5
GameObject.FindGameObjectWithTag("Screw5").GetComponent<Renderer>().material.color = Color.white;
tooltip4.SetActive(true);
if (++curInterval < interval)
{
return;
}
curInterval = 0;
//查找对象
GameObject ScrewObj = GameObject.Find("CTPlanes/CTPlane1/ScrewHview2");
clonescrew4H = Instantiate(ScrewObj);
clonescrew4H.transform.SetParent(GameObject.Find("CTPlanes/CTPlane1").transform);
clonescrew4H.transform.localPosition = GameObject.Find("CTPlanes/CTPlane1/ScrewHview2").transform.localPosition;
clonescrew4H.transform.localRotation = GameObject.Find("CTPlanes/CTPlane1/ScrewHview2").transform.localRotation;
clonescrew4H.transform.localScale = GameObject.Find("CTPlanes/CTPlane1/ScrewHview2").transform.localScale;
clonescrew4H.GetComponent<Renderer>().material.color = Color.white;
ScrewObj = GameObject.Find("CTPlanes/CTPlane2/ScrewVview2");
clonescrew4V = Instantiate(ScrewObj);
clonescrew4V.transform.SetParent(GameObject.Find("CTPlanes/CTPlane2").transform);
clonescrew4V.transform.localPosition = GameObject.Find("CTPlanes/CTPlane2/ScrewVview2").transform.localPosition;
clonescrew4V.transform.localRotation = GameObject.Find("CTPlanes/CTPlane2/ScrewVview2").transform.localRotation;
clonescrew4V.transform.localScale = GameObject.Find("CTPlanes/CTPlane2/ScrewVview2").transform.localScale;
clonescrew4V.GetComponent<Renderer>().material.color = Color.white;
updateflag4 = true;//只更新一次
}
if (!updateflag5)
{
float x, y, z, rx, ry, rz;
GameObject.Find("CTPlanes/CTPlane1/ScrewHview2").GetComponent<Renderer>().material.color = Color.cyan;
GameObject.Find("CTPlanes/CTPlane2/ScrewVview2").GetComponent<Renderer>().material.color = Color.cyan;
x = GameObject.FindGameObjectWithTag("Screw6").transform.position.x;
y = GameObject.FindGameObjectWithTag("Screw6").transform.position.y;
z = GameObject.FindGameObjectWithTag("Screw6").transform.position.z;
rx = GameObject.FindGameObjectWithTag("Screw6").transform.eulerAngles.x;//.rotation.x;
ry = GameObject.FindGameObjectWithTag("Screw6").transform.eulerAngles.y;
rz = GameObject.FindGameObjectWithTag("Screw6").transform.eulerAngles.z;
GameObject.Find("Probe2").transform.position = new Vector3(x, y, z);
GameObject.Find("Probe2").transform.eulerAngles = new Vector3(rx, ry, rz);
GameObject.FindGameObjectWithTag("Screw6").GetComponent<MeshRenderer>().enabled = true;//渲染以显示screw6
GameObject.FindGameObjectWithTag("Screw6").GetComponent<Renderer>().material.color = Color.cyan;
tooltip5.SetActive(true);
if (++curInterval < interval)
{
return;
}
curInterval = 0;
//查找对象
GameObject ScrewObj = GameObject.Find("CTPlanes/CTPlane1/ScrewHview2");
clonescrew5H = Instantiate(ScrewObj);
clonescrew5H.transform.SetParent(GameObject.Find("CTPlanes/CTPlane1").transform);
clonescrew5H.transform.localPosition = GameObject.Find("CTPlanes/CTPlane1/ScrewHview2").transform.localPosition;
clonescrew5H.transform.localRotation = GameObject.Find("CTPlanes/CTPlane1/ScrewHview2").transform.localRotation;
clonescrew5H.transform.localScale = GameObject.Find("CTPlanes/CTPlane1/ScrewHview2").transform.localScale;
clonescrew5H.GetComponent<Renderer>().material.color = Color.cyan;
ScrewObj = GameObject.Find("CTPlanes/CTPlane2/ScrewVview2");
clonescrew5V = Instantiate(ScrewObj);
clonescrew5V.transform.SetParent(GameObject.Find("CTPlanes/CTPlane2").transform);
clonescrew5V.transform.localPosition = GameObject.Find("CTPlanes/CTPlane2/ScrewVview2").transform.localPosition;
clonescrew5V.transform.localRotation = GameObject.Find("CTPlanes/CTPlane2/ScrewVview2").transform.localRotation;
clonescrew5V.transform.localScale = GameObject.Find("CTPlanes/CTPlane2/ScrewVview2").transform.localScale;
clonescrew5V.GetComponent<Renderer>().material.color = Color.cyan;
updateflag5 = true;//只更新一次
}
}
}
}