Case:
win10 systems, while on WiFi and cable, WiFi network for the Pearl River, the local gateway to 192.169.100.1, Dr. Peng telecommunications cable network, gateway: 10.1.1.1/24,
The current situation is: WiFi and cable separately connected to the Internet can be normal, but because of the configuration of a NAS, connected telecommunications network, but because the telecommunications router mother often I turn off the stupid European Peas
No choice but to protect internal and external transport speed Internet access and dual-network and the NAS by networking the way.
Configuration attempt 1: Configuring Static Routing
administrator privileges to run cmd
first look at the routing case
route print
and then delete the default route
route delete 0.0.0.0
Add two static, the whole packet outside the network 192.169.100.1 go this gateway, network packets full go 10.1.1.1 gateway
route 0.0.0.0 mask 0.0.0.0 192.1.100.1 the Add -p
route the Add 10.1.1.0 mask 255.255.255.0 -p 10.1.1.1
after the setup is complete at that time can be used normally, but after a while, visit the problematic page refresh is very slow, but then unplug the network cable can be used normally check the routing table found after plug the Internet cable, network cable the route automatically add the Internet routing, and only within the network use conflicts, so Internet data transmission disorder, packet loss, Baidu solution
1, select advanced options changes to your network adapter, change the priority within the network and outside the network, but this is not my win10 system interface. . .
2, the network properties advanced interface, change the interface metric, metric represents a route, the lower the number of hops and the fewer number of routes through higher network priority, so the Pearl River wide metric is adjusted to be lower than the telecommunications network.
By the second method deal with the problem, access to internal and external network are normal, and then I hit the LOL, emm, super-God makes me happy.
