The H3C server creates RAID1 through the management port WEB login, and installs Windows server 2016
Connect to the HDM management port of the H3C server through a network cable, and configure the IP address as 192.168.1.1:24 (the management address of the server is 192.168.1.2)
Material:
Server: Uniserver R4900 G3
Windows server 2016 (system image)
a network cable
A computer (laptop) that can be plugged into a network cable
1. Log in to WEB management
1. Plug in the Internet cable, and configure the IP address on the notebook as 192.168.1.1
2. Open the browser and enter the server management IP address, and enter the default administrator account password on the pop-up page (account: admin password: Password@_)
3. Find Remote Service-Remote Console-H5 KVM, and click to start H5 KVM
2. Configure RAID
1. Another WEB remote desktop will pop up, select F7 to enter the boot menu according to the prompt
2. Select enter setup
3. Use the keyboard → select advanced (advanced options)
4. Find and press Enter to enter the array card
5. After entering the array card, press Enter to enter the Main Menu (main menu)
6. Select configuration Management (configuration management)
7. Enter create virtual drive (create virtual disk)
8. Select the RAID level and press Enter to select RAID Level (choose to configure RAID1)
9. Next, you need to configure the required hard disk and enter select drives
10. To configure the hard disk, which hard disk is needed, you can turn on or off the hard disk, press the space or enter to change the [disabled] behind the hard disk to [enabled].
Disabled: off; Enabled: on;
11. Select apply changes to save
check all: modify all hard disks to enabled, uncheck all: modify all hard disks to disabled, apply changes: save the configuration made
confirm
12. Save the array configuration save configuration
You need to modify the option to enabled to select YES to confirm
created successfully
13. Press F4 to save and exit
3. Install the system
1. After exiting, restart the system and just wait (you need to plug in the system disk or select the system image in the upper right corner)
2. Start the installation, click Next
3. Enter the secret key or enter and enter
4. Choose a windowed desktop version
5. Select Custom to allocate space
6. Partition, allocate 128G as the C drive, and the rest can be entered into the system for partitioning and setting the drive letter
7. Select the disk to install the system and click Next
8. Set password
9. Partition the hard disk without partitions, right click on this computer - manage - "tools" in the upper right corner - computer management - disk management
4. Activate Windows offline
1. Find and run or win+R and enter slui 4, select China
2. Make a phone call, restart the system after the activation is complete
