sys enters the system attempt
] local-user admin Create a local user, admin is the username
] password simple admin Set local user password
] authorization-attribute user-role network-admin Set local user rights to administrator rights
] service-type tenet Set the local user service type to telnet
]that
]line vty 0 63 Enter remote user view
]authentication-mode scheme Set the remote login authentication mode to scheme, that is, the authentication mode that requires username + password
]qu
]telnet server enable Open telnet service
] vlan 10
]interface vlan-interface 10 Create vlan interface ip, the IP address used for telnet login
]ip add 1.1.1.1 24 Add vlan interface IP address, used as the gateway of this vlan.
The IP address of the last configuration computer is the network segment of vlan, enter the cmd command view, and log in with telnet 1.1.1.1.
2.137
h3c
h3c123