Login using Telnet switches Query Manager provides a convenient device for the network administrator does not need all day carrying a notebook tucked console line squatting room, as long as Telnet on the computer can be connected to the appropriate network connection.
Provided that the switch has been configured with ip address and network reachability.
Configuration Step
1, and Telnet server configuration parameters:
including Telnet server enable the server and the parameters
[huawei]telnet server enable //使能Telnet
Use some of the equipment
[huawei]undo telnet server disable
2, Telnet users logged-on user interface:
including user-level VTY user interface, authentication, limit incoming and outgoing calls and other basic properties
[HUAWEI] User-interface VTY 0. 4 [HUAWEI-Line-vty0-4] // use authentication-MODE aaa aaa authentication [huawei-line-vty0-4] protocol inbound telnet // allow access Telnet
3, the configuration of the local user Telnet type (AAA authentication mode)
when the authentication mode comprises a user name and password to AAA
[HUAWEI] aaa [HUAWEI-aaa] local-the User username password cipher password // set username and password
Some of the equipment will be set up password security policies, can not create a simple password
using the command cancel the password security policy
[huawei-aaa]undo local-user policy password complexity-enhance [huawei-aaa]undo local-user policy security-enhance
Each version of the command may be a little difference
[huawei-aaa] local-user username service-type telnet // the user to type the Telnet [huawei-aaa] local-user level 15 // user name of the user level is 15, part of the device level may differ, in general maximum write
On completion of the above configuration switches
Telnet + from another terminal using the IP address of the log to the device