CK-S640-AP60E is a low frequency RFID tag reader based on radio frequency identification technology. The working frequency of the reader is 134.2kHz. The card reader supports standard industrial semiconductor SECS protocol and ProfiNet protocol, which is convenient for users to apply to semiconductor processing controllers and integrate into PLC control systems. There are three mode switch selectors outside the device, which is convenient for users to directly set the working mode, communication rate and device address. The radio frequency part of the communication protocol is integrated inside the card reader. The user only needs to send and receive data through the RS232/RJ45 communication interface to complete the tag reading operation, without understanding the complex radio frequency communication protocol.
The semiconductor glass tube label industrial-grade low-frequency RFID reader CK-S640-AP60E adopts the HDX half-duplex data transmission mode and is compatible with the CID carrier produced by Texas Instruments. It has excellent read and write reliability and environmental resistance, and has excellent production efficiency. Semiconductor manufacturing workshops that require high maintenance and cleaning resistance have a wide range of application values. The CK-S640 series card readers are compatible with the SECS command and can be seamlessly integrated into existing semiconductor production equipment. Widely used in semiconductor automated production lines, power lithium battery production lines, automobile production lines, etc.
- Power consumption: 3.5W
- Communication protocol ProfiNet
- Communication interface: RS232/Ethernet;
- DC power supply: 24V (with reverse connection and overcurrent protection);
- Working frequency: 134.2kHz
- Card reading distance: 0~70mm;
- Working humidity: 10-90% RH;
◆ Working temperature: -25℃-+70℃;
◆ Working mode: HDX;
◆ Radio frequency standard: ISO11784/11785;
◆ Support tags: SIC7999, TI tags (RI-TRP-DR2B-30, RI-TRP-DR2B-40,
TRPGP40ATGC,TRPGR30ATGA,TRPGR30ATGB);
Physical and environmental characteristics:
project |
Technical Parameters |
Operating temperature |
-25℃~70℃ |
storage temperature |
-40℃~85℃ |
Humidity |
5%~95% non-condensing state |
Weight |
260g |
Drop test |
1.2m free fall |
ESD performance |
Air discharge ±15KV, contact discharge ±8KV |
Electrical parameter index:
project |
Technical Parameters |
Power supply |
DC 24V |
Power consumption |
1.5W |
Circuit protection |
Reverse connection and overcurrent protection |
Communication interface |
RS232、RJ45 |
letter of agreement |
SECS、MODBUS TCP、ProfiNet |
232 default communication baud rate |
9600 |