Cortex-M3 在C中上报入栈的寄存器和各fault状态寄存器

因为在标准C语音中是不能获取SP指针的。因而，如果想通过C代码来获取入栈的寄存器值，需要配合一小段汇编代码来获取当前的SP值，然后再把这个SP值以参数形式传送给C代码，最后以指针的形式把栈中的各寄存器值输出，同时也可以输出一些想要的各种状态寄存器值。如下：

Keil环境汇编封皮：

 1 HardFault_Handler\
 2                 PROC
 3                 EXPORT  HardFault_Handler         [WEAK]
 4                 IMPORT    hard_fault_handler_c
 5                 TST     LR, #4
 6                 ITE     EQ
 7                 MRSEQ    R0, MSP
 8                 MRSNE    R0, PSP
 9                 B        hard_fault_handler_c
10                 ENDP

C服务程序，输入为SP的值：

 1 void hard_fault_handler_c( unsigned int *reg )
 2 {
 3     unsigned int stacked_r0;
 4     unsigned int stacked_r1;
 5     unsigned int stacked_r2;
 6     unsigned int stacked_r3;
 7     unsigned int stacked_r12;
 8     unsigned int stacked_lr;
 9     unsigned int stacked_pc;
10     unsigned int stacked_psr;
11 
12     stacked_r0 = (unsigned int)reg[0];
13     stacked_r1 = (unsigned int)reg[1];
14     stacked_r2 = (unsigned int)reg[2];
15     stacked_r3 = (unsigned int)reg[3];
16     
17     stacked_r12 = (unsigned int)reg[4];
18     stacked_lr = (unsigned int)reg[5];
19     stacked_pc = (unsigned int)reg[6];
20     stacked_psr = (unsigned int)reg[7];
21 
22     while( 1 )
23     {
24         printf("--> %s\r\n", __FUNCTION__);
25         //printf("EXC_RETURN: %08X\r\n", r1);
26         printf("R0: %08X\r\n", stacked_r0);
27         printf("R1: %08X\r\n", stacked_r1);
28         printf("R2: %08X\r\n", stacked_r2);
29         printf("R3: %08X\r\n", stacked_r3);
30         printf("R12: %08X\r\n", stacked_r12);
31         printf("LR: %08X\r\n", stacked_lr);
32         printf("PC: %08X\r\n", stacked_pc);
33         printf("PSR: %08X\r\n", stacked_psr);
34 
35         // 系统handler控制及状态寄存器
36         printf("SHCSR: %08X\r\n", (*(volatile unsigned int *)(0xE000ED24)));
37         //printf("MFSR: %02X\r\n", (*(volatile unsigned char *)(0xE000ED28)));
38         //printf("BFSR: %02X\r\n", (*(volatile unsigned char *)(0xE000ED29)));
39         //printf("UFSR: %04X\r\n", (*(volatile unsigned short *)(0xE000ED2A)));
40         // 存储器管理fault、总线fault、用法fault状态寄存器
41         printf("CFSR: %08X\r\n", (*(volatile unsigned int *)(0xE000ED28)));
42         // 硬fault状态寄存器
43         printf("HFSR: %08X\r\n", (*(volatile unsigned int *)(0xE000ED2C)));
44         // 调试fault状态寄存器
45         printf("DFSR: %08X\r\n", (*(volatile unsigned int *)(0xE000ED30)));
46 
47         // 存储器管理fault地址寄存器
48         printf("MMAR: %08X\r\n", (*(volatile unsigned int *)(0xE000ED34)));
49         // 总线fault地址寄存器
50         printf("BFAR: %08X\r\n", (*(volatile unsigned int *)(0xE000ED38)));
51         // 辅助fault地址寄存器
52         printf("AFAR: %08X\r\n", (*(volatile unsigned int *)(0xE000ED3C)));
53     }
54 
55     return ;
56 }

---

参考摘录： 

《ARM Cortex-M3权威指南.pdf》