过新真三蓝宝石地图-MH命令工具

要知道怎么过“-mh”命令，首先得知道地图的“-mh”做了些什么事情，从地图提取出war3map.j文件，搜索关键词“可能作弊”检测MH的触发器

function Trig_EagelAMH_Actions takes nothing returns nothing
call DisableTrigger(GetTriggeringTrigger())
call PolledWait(2.00)
call EnableTrigger(gg_trg_EagelSeekA)
call EnableTrigger(gg_trg_EagelSeekB)
call SetUserControlForceOff(bj_FORCE_ALL_PLAYERS)
call CreateNUnitsAtLoc(1,'hfoo',Player(15),udg_EagelAMHp,bj_UNIT_FACING)
set udg_EagelAMHu=bj_lastCreatedUnit
set bj_forLoopAIndex=1
set bj_forLoopAIndexEnd=12
loop
exitwhen bj_forLoopAIndex>bj_forLoopAIndexEnd
if(Trig_EagelAMH_Func007Func001C())then
call CreateFogModifierRadiusLocBJ(true,Player(-1+(bj_forLoopAIndex)),FOG_OF_WAR_VISIBLE,udg_EagelAMHp,512)
set udg_EagelAMHfog[bj_forLoopAIndex]=bj_lastCreatedFogModifier
call SelectUnitForPlayerSingle(udg_EagelAMHu,Player(-1+(bj_forLoopAIndex)))
call DestroyFogModifier(udg_EagelAMHfog[bj_forLoopAIndex])
endif
set bj_forLoopAIndex=bj_forLoopAIndex+1
endloop
call PolledWait(1.)
call RemoveUnit(udg_EagelAMHu)
call TriggerExecute(gg_trg_EagelPrint)
call SetUserControlForceOn(bj_FORCE_ALL_PLAYERS)
call DisableTrigger(gg_trg_EagelSeekA)
call DisableTrigger(gg_trg_EagelSeekB)
call EnableTrigger(GetTriggeringTrigger())
endfunction

创建一个单位，再选中单位是一般地图反MH的做法，Lynn的那篇文章说的也是这种，而新真三蓝宝石也是使用了这种种方法来检测MH，先调用CreateFogModifierRadiusLocBJ，创建一块迷雾，再该坐标创建一个单位（好像是个人族步兵），然后再让玩家选择该单位，反正我们的目的就是破坏这段代码的功能，最直接的就是让他不做事，直接retn（好像没什么技术含量，都是Lynn说过的...）...

下面给出关键C++代码

void CbypassDlg::OnBnClickedPatch()
{
    // TODO: 在此添加控件通知处理程序代码
    DWORD pid;
    HWND hwar3=::FindWindow(L"Warcraft III",L"Warcraft III");
    if(!hwar3)
    {
        MessageBox(L"can't find Warcraft III!");
        return;
    }
    GetWindowThreadProcessId(hwar3, &pid);
    HANDLE hopen = OpenProcess(PROCESS_ALL_ACCESS, false, pid);
//    BYTE _data1[]= {0x33,0xC0,0xE9,0x96,0x01,0x00,0x00,0x90,0x90,0x90,0x90,0x90};//改写CreateFogModifierRadiusLoc 函数入口处的代码
    BYTE _data2[]= {0x33,0xC0,0xE9,0xFC,0x00,0x00,0x00,0x90,0x90,0x90,0x90,0x90};//改写SelectUnit函数入口处的代码
    //CreateFogModifierRadiusLoc 函数入口处 地址为0x6F2B3170
    //SelectUnit函数入口处 地址为 0x6F2C59A0
//    if(!WriteProcessMemory(hopen,(LPVOID)(0x6F2B3170), &_data1,12, NULL) || !WriteProcessMemory(hopen,(LPVOID)(0x6F2C59A0), &_data2,12, NULL))
    if(!WriteProcessMemory(hopen,(LPVOID)(0x6F2C59A0), &_data2,12, NULL))
    {
        MessageBox(L"patch error!");
        return;
    }
    else
        MessageBox(L"success!");
}

在上面的代码里可以看到我注释掉了修改CreateFogModifierRadiusLoc 函数入口处的部分，因为这样做是不行的，也就是说任何创建单位，创建物品之类的函数，如果retn掉的话，魔兽就会出现数据同步错误而掉线，所以只能修改操作函数，而不能修改影响魔兽数据的函数（在这里曾经犯过错误= =！）...

void CbypassDlg::OnBnClickedRecovery()
{
    // 恢复函数
    DWORD pid;
    HWND hwar3=::FindWindow(L"Warcraft III",L"Warcraft III");
    if(!hwar3)
    {
        MessageBox(L"can't find Warcraft III!");
        return;
    }
    GetWindowThreadProcessId(hwar3, &pid);
    HANDLE hopen = OpenProcess(PROCESS_ALL_ACCESS, false, pid);
//    BYTE _data1[]= {0x55,0x8B,0xEC,0x83,0xEC,0x3C,0x8B,0x0D,0xBC,0x22,0x87,0x6F};
    BYTE _data2[]= {0x55,0x8B,0xEC,0x83,0xEC,0x08,0x8B,0x0D,0xBC,0x22,0x87,0x6F};
//    if(!WriteProcessMemory(hopen,(LPVOID)(0x6F2B3170), &_data1,12, NULL) || !WriteProcessMemory(hopen,(LPVOID)(0x6F2C59A0), &_data2,12, NULL))
    if(!WriteProcessMemory(hopen,(LPVOID)(0x6F2C59A0), &_data2,12, NULL))
    {
        MessageBox(L"recovery error!");
        return;
    }
    else
        MessageBox(L"success!");
}

============================================还是分割线===========================

相信已经说的够清楚了，程序源代码也没必要给出了，有上面两处关键代码就足够了

过新真三蓝宝石地图-MH命令工具

猜你喜欢