分类：
2009-11-06 14:39:40
采购订单项目表中的更改日期妙用——EKPO-AEDAT.
1.记录删除的日期
一开始用户要此信息，我都使用跟踪查找到CDPOS更改凭证项目表，使用此表勉强可以得到正确的信息，但是如果CLIENT COPY做得不好，此类信息会丢失，所以在开发的CLIENT却很难测试正确。方法如下：
LOOP AT ITAB_100 WHERE LOEKZ = 'L'.
CONCATENATE ‘％' ITAB_100-EBELN ITAB_100-EBELP INTO ITAB_100-EBENP.
SELECT SINGLE CHANGENR INTO ITAB_100-CHANGENR FROM CDPOS
WHERE TABNAME = 'EKPO' AND FNAME = 'LOEKZ' AND VALUE_NEW = 'L' AND TABKEY LIKE ITAB_100-EBENP.
IF SY-SUBRC = 0.
SELECT SINGLE VALUE_NEW INTO ITAB_100-MAEDAT FROM CDPOS
WHERE TABNAME = 'EKPO' AND FNAME = 'AEDAT' AND CHANGENR = ITAB_100-CHANGENR .
ENDIF.
MODIFY ITAB_100.
CLEAR ITAB_100.
ENDLOOP.
***注意MAEDAT必须LIKE CDPOS-VALUE_NEW
但是事后才发觉，这些代码都是多此一举，仅仅EKPO-AEDAT这个字段就记录了删除日期，只要抓取它就可以了。方法如下：
IF ITAB_100-LOEKZ = 'L'.
ITAB_100-STATE = '删除'.
ITAB_100-MAEDAT = ITAB_100-AEDATP.
ELSE.
IF ITAB_100-AEDATP IS INITIAL.
ITAB_100-STATE = '错误'.
ELSE.
ITAB_100-STATE = '正常'.
ENDIF.
ENDIF.
2.记录采购订单暂存状态
当采购订单的项目前有个红色的圆点状，表示此订单为暂存状态，也可以用这个EKPO-AEDAT来识别。
当EKPO-AEDAT为空的情况，表示此采购订单的此项为暂存状态，有部分信息需要填充，否则不能正常使用。
方法如下：
IF ITAB_100-AEDATP IS INITIAL.
ITAB_100-STATE = '错误'.
ELSE.
ITAB_100-STATE = '正常'.
ENDIF.
××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××
整个报表范例：
REPORT ×××××× no standard page heading MESSAGE-ID zjxydmessage.
*--------------------------------------------------------------*
*Defind include for ALV output.
*--------------------------------------------------------------*
TYPE-POOLS: SLIS.
INCLUDE .
INCLUDE .
*--------------------------------------------------------------*
*Data definition
*--------------------------------------------------------------*
CONSTANTS:
GC_FORMNAME_TOP_OF_PAGE TYPE SLIS_FORMNAME VALUE 'TOP_OF_PAGE'.
DATA: GT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
GS_LAYOUT TYPE SLIS_LAYOUT_ALV,
GT_SP_GROUP TYPE SLIS_T_SP_GROUP_ALV,
GT_EVENTS TYPE SLIS_T_EVENT.
DATA: G_SAVE(1) TYPE C,
G_DEFAULT(1) TYPE C,
G_EXIT(1) TYPE C,
GX_VARIANT LIKE DISVARIANT,
G_USER_COMMAND TYPE SLIS_FORMNAME VALUE 'USER_COMMAND',
G_VARIANT LIKE DISVARIANT,
G_REPID LIKE SY-REPID,
V_ANSWER,
v_program(40),
v_printdate(60),
v_tcode(20),
V_ERRORFLAG TYPE N.
DATA: GT_LIST_TOP_OF_PAGE TYPE SLIS_T_LISTHEADER.
*----------------------------------------------------------------------*
*定义TABLE
*---------------------------------------------------------------------*
tables: EKKO, "采购凭证抬头
EKPO, "采购凭证项目
MEPO_TOPLINE,
T007S. "税收代码
data: begin of itab_100 occurs 1,
WERKS LIKE EKPO-WERKS, "工厂
LIFNR LIKE EKKO-LIFNR, "供应商帐号
NAME1 LIKE LFA1-NAME1, "供应商帐号
EBELN LIKE EKKO-EBELN, "采购凭证号
EBELP LIKE EKPO-EBELP, "项目编号
EBENP(14) TYPE C, "订单号＋项目号
EBELN1 LIKE EKKO-EBELN, "采购凭证号
BSART LIKE EKKO-BSART, "采购凭证类型
BATXT LIKE T161T-BATXT, "采购凭证类型
KNUMV LIKE EKKO-KNUMV, "采购凭证类型
KWERT LIKE KONV-KWERT, "采购凭证类型
AEDAT LIKE EKKO-AEDAT, "记录创建日期
AEDAT1 LIKE EKKO-AEDAT, "记录创建日期
GDATU LIKE TCURR-GDATU, "记录创建日期
TXZ01 LIKE EKPO-TXZ01, "短文本
NETWR LIKE EKPO-NETWR, "采购金额(不含税)
WAERS LIKE EKKO-WAERS, "货币代码
UKURS LIKE TCURR-UKURS, "汇率
MWSKZ LIKE EKPO-MWSKZ, "税代码
TEXT1 LIKE T007S-TEXT1, "比例
EFFWR LIKE EKPO-EFFWR, "项目的有效值
LOEKZ LIKE EKPO-LOEKZ, "采购凭证删除标识
NETWR1 LIKE EKPO-NETWR, "采购金额(含税)
NETWR2 LIKE EKPO-NETWR, "运费金额(不含税)
NETWR3 LIKE EKPO-NETWR, "运费金额(含税)
NETWR4 LIKE EKPO-NETWR, "金额合计(含税)
CHANGENR LIKE CDPOS-CHANGENR, "文档更改编号
SHOU(2) TYPE C, "是否收货
STATE(4) TYPE C, "订单状态
MAEDAT LIKE EKKO-AEDAT, "删除日期
BI(2) TYPE C, "税比例
OTHER(20) TYPE C, "订单状态
end of itab_100.
*-----检查权限控制
data: begin of itab_tvko occurs 0,
vkorg like tvko-vkorg, "销售组织
end of itab_tvko.
data: v_auth. "检查权限
data: VTEXT(30) TYPE C, "部门名称
v_bukrs LIKE TVKO-bukrs, "部门名称
t_bukrs like t001-butxt, "公司名称
VKUNNR LIKE VBAK-KUNNR, "售达方
OUT_NO(20) TYPE C, "HEAD文本用来填定出厂编号
V_NETWR LIKE EKPO-NETWR, "采购金额(含税)
VNAME(60) TYPE C. "客户名称
DATA:xname like thead-tdname, "文本名称
xvbadr like vbadr, "vbadr短文本地址工作区结构
xtline like tline occurs 10 with header line,
xflag(1),
xtemp like sy-tabix.
*--------------------------------------------------------------*
selection-screen begin of block b1 with frame title text-001.
parameters: P_BUKRS like EKKO-BUKRS obligatory . "公司代码
select-options: S_WERKS for EKPO-WERKS obligatory . "工厂
select-options: S_BSART for MEPO_TOPLINE-BSART . "订单类型
select-options: S_EBELN for EKKO-EBELN . "订单类型
select-options: S_AEDAT for EKKO-AEDAT obligatory . "订单创建日期
selection-screen end of block b1.
*--------------------------------------------------------------*
*Initiallize for ALV output
*--------------------------------------------------------------*
INITIALIZATION.
G_REPID = SY-REPID.
G_SAVE = 'A'.
CLEAR G_VARIANT.
G_VARIANT-REPORT = G_REPID.
at selection-screen on S_WERKS.
select single bukrs into v_bukrs from TVKO
where VKORG IN S_WERKS.
if v_bukrs ne P_bukrs.
message e021 with '请选择正确的工厂'.
endif.
*--------------------------------------------------------------*
start-of-selection.
perform author_check.
if v_auth ne 'X'.
perform get_data.
perform sort_data.
perform prepare_alv.
perform list_data.
endif.
*&-------------------------------------------------------------*
*& Form get_data
*&-------------------------------------------------------------*
* text
*--------------------------------------------------------------*
* --> p1 text
* <-- p2 text
*--------------------------------------------------------------*
FORM get_data.
SELECT EKPO~WERKS EKKO~LIFNR EKKO~EBELN EKKO~BSART EKKO~KNUMV EKKO~AEDAT EKKO~WAERS
EKPO~TXZ01 EKPO~NETWR EKPO~MWSKZ EKPO~EFFWR EKPO~LOEKZ EKPO~EBELP
into corresponding fields of itab_100
FROM EKKO INNER JOIN EKPO ON EKKO~EBELN = EKPO~EBELN
WHERE EKKO~EBELN IN S_EBELN AND
EKKO~BUKRS = P_BUKRS AND
EKPO~WERKS IN S_WERKS AND
EKKO~BSART IN S_BSART AND
EKKO~AEDAT IN S_AEDAT .
**取供应商名称
SELECT SINGLE NAME1 INTO ITAB_100-NAME1 FROM LFA1 WHERE LIFNR = ITAB_100-LIFNR.
**取税描述
SELECT SINGLE TEXT1 INTO ITAB_100-TEXT1 FROM T007S
WHERE SPRAS = '1' AND KALSM = 'TAXCN' AND MWSKZ = ITAB_100-MWSKZ.
**取税比例
SPLIT ITAB_100-TEXT1 AT '%' INTO ITAB_100-BI ITAB_100-OTHER.
**取采购金额(含税)
ITAB_100-NETWR1 = ITAB_100-NETWR + ITAB_100-NETWR * ITAB_100-BI.
**取订单类型描述
SELECT SINGLE BATXT INTO ITAB_100-BATXT FROM T161T WHERE BSART = ITAB_100-BSART.
**取汇率(月初的汇率)
CONCATENATE ITAB_100-AEDAT(6) '01' INTO ITAB_100-AEDAT1.
CONVERT DATE ITAB_100-AEDAT1 INTO INVERTED-DATE ITAB_100-GDATU.
ITAB_100-UKURS = 1.
SELECT SINGLE UKURS INTO ITAB_100-UKURS FROM TCURR
WHERE KURST = 'M' AND FCURR = ITAB_100-WAERS AND TCURR = 'CNY' AND GDATU = ITAB_100-GDATU.
**取金额合计(含税)
ITAB_100-NETWR4 = ( ITAB_100-NETWR1 + ITAB_100-NETWR3 ) * ITAB_100-UKURS.
**判断是否有收货
SELECT SINGLE EBELN INTO ITAB_100-EBELN1 FROM EKBE WHERE EBELN = ITAB_100-EBELN AND BEWTP = 'E'.
IF SY-SUBRC = 0.
ITAB_100-SHOU = '是'.
ELSE.
ITAB_100-SHOU = '否'.
ENDIF.
**判断是删除
IF ITAB_100-LOEKZ = 'L'.
ITAB_100-STATE = '删除'.
ELSE.
ITAB_100-STATE = '正常'.
ENDIF.
APPEND ITAB_100.
CLEAR ITAB_100.
ENDSELECT.
**取运费
LOOP AT ITAB_100 .
IF ITAB_100-EFFWR NE ITAB_100-NETWR.
SELECT KWERT INTO V_NETWR FROM KONV
WHERE KNUMV = ITAB_100-KNUMV AND ( KSCHL = 'FRC1' OR KSCHL = 'FRC2').
ITAB_100-NETWR2 = ITAB_100-NETWR2 + V_NETWR .
V_NETWR = 0.
ENDSELECT.
**取运费金额(含税)
ITAB_100-NETWR3 = ITAB_100-NETWR2 * 100 / 93 .
**取金额合计(含税)
ITAB_100-NETWR4 = ( ITAB_100-NETWR1 + ITAB_100-NETWR3 ) * ITAB_100-UKURS.
MODIFY ITAB_100.
CLEAR ITAB_100.
ENDIF.
ENDLOOP.
**取删除日期
LOOP AT ITAB_100 WHERE LOEKZ = 'L'.
CONCATENATE ITAB_100-EBELN ITAB_100-EBELP INTO ITAB_100-EBENP.
SELECT SINGLE CHANGENR INTO ITAB_100-CHANGENR FROM CDPOS
WHERE TABNAME = 'EKPO' AND FNAME = 'LOEKZ' AND VALUE_NEW = 'L' AND TABKEY = ITAB_100-EBENP.
IF SY-SUBRC = 0.
SELECT SINGLE VALUE_NEW INTO ITAB_100-MAEDAT FROM CDPOS
WHERE TABNAME = 'EKPO' AND FNAME = 'AEDAT' AND CHANGENR = ITAB_100-CHANGENR .
ENDIF.
MODIFY ITAB_100.
CLEAR ITAB_100.
ENDLOOP.
ENDFORM. " get_data
*&---------------------------------------------------------------------*
*& Form sort_data
*&---------------------------------------------------------------------*
* text
*----------------------------------------------------------------------*
* --> p1 text
* <-- p2 text
*----------------------------------------------------------------------*
FORM sort_data .
sort itab_100 by AEDAT EBELN.
ENDFORM. " sort_data
*&-------------------------------------------------------------*
*& Form list_data
*&-------------------------------------------------------------*
* text
*--------------------------------------------------------------*
* --> p1 text
* <-- p2 text
*--------------------------------------------------------------*
FORM list_data.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY' "output via ALV
EXPORTING
I_CALLBACK_PROGRAM = G_REPID
IT_FIELDCAT = GT_FIELDCAT[]
IT_EVENTS = GT_EVENTS[]
I_SAVE = 'A'
TABLES
T_OUTTAB = ITAB_100.
ENDFORM. " list_data
*---------------------------------------------------------------------*
* FORM TOP_OF_PAGE *
*---------------------------------------------------------------------*
* ........ *
*---------------------------------------------------------------------*
FORM TOP_OF_PAGE.
*---prepare ALV header output
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
i_logo = 'ENJOYSAP_LOGO'
IT_LIST_COMMENTARY = GT_LIST_TOP_OF_PAGE.
ENDFORM. "list_data
*&---------------------------------------------------------------------*
*& Form prepare_alv
*&---------------------------------------------------------------------*
* text
*----------------------------------------------------------------------*
* --> p1 text
* <-- p2 text
*----------------------------------------------------------------------*
FORM prepare_alv .
PERFORM E01_FIELDCAT_INIT USING GT_FIELDCAT[].
PERFORM E03_EVENTTAB_BUILD USING GT_EVENTS[].
PERFORM E04_COMMENT_BUILD USING GT_LIST_TOP_OF_PAGE[].
ENDFORM. " prepare_alv
*&---------------------------------------------------------------------*
*& Form E01_FIELDCAT_INIT
*&---------------------------------------------------------------------*
* text
*----------------------------------------------------------------------*
* -->P_GT_FIELDCAT[] text
*----------------------------------------------------------------------*
FORM E01_FIELDCAT_INIT USING E01_LT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA: LS_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
*---Populate ALV field structure
CLEAR LS_FIELDCAT.
LS_FIELDCAT-TABNAME = 'ITAB_100'.
LS_FIELDCAT-FIELDNAME = 'WERKS'.
LS_FIELDCAT-COL_POS = '1'.
LS_FIELDCAT-SELTEXT_L = '工厂'.
LS_FIELDCAT-DDICTXT = 'L'.
LS_FIELDCAT-outputlen = '4'.
LS_FIELDCAT-just = 'C'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
CLEAR LS_FIELDCAT.
LS_FIELDCAT-TABNAME = 'ITAB_100'.
LS_FIELDCAT-FIELDNAME = 'EBELN'.
LS_FIELDCAT-COL_POS = '2'.
LS_FIELDCAT-SELTEXT_L = '订单号码'.
LS_FIELDCAT-DDICTXT = 'L'.
LS_FIELDCAT-outputlen = '10'.
LS_FIELDCAT-just = 'L'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
CLEAR LS_FIELDCAT.
LS_FIELDCAT-TABNAME = 'ITAB_100'.
LS_FIELDCAT-FIELDNAME = 'LIFNR'.
LS_FIELDCAT-COL_POS = '3'.
LS_FIELDCAT-SELTEXT_L = '供应商代码'.
LS_FIELDCAT-DDICTXT = 'L'.
LS_FIELDCAT-outputlen = '10'.
LS_FIELDCAT-just = 'L'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
CLEAR LS_FIELDCAT.
LS_FIELDCAT-TABNAME = 'ITAB_100'.
LS_FIELDCAT-FIELDNAME = 'NAME1'.
LS_FIELDCAT-COL_POS = '4'.
LS_FIELDCAT-SELTEXT_L = '供应商名称'.
LS_FIELDCAT-DDICTXT = 'L'.
LS_FIELDCAT-outputlen = '35'.
LS_FIELDCAT-just = 'L'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
CLEAR LS_FIELDCAT.
LS_FIELDCAT-TABNAME = 'ITAB_100'.
LS_FIELDCAT-FIELDNAME = 'AEDAT'.
LS_FIELDCAT-COL_POS = '5'.
LS_FIELDCAT-SELTEXT_L = '订单创建日期'.
LS_FIELDCAT-DDICTXT = 'L'.
LS_FIELDCAT-outputlen = '10'.
LS_FIELDCAT-just = 'L'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
CLEAR LS_FIELDCAT.
LS_FIELDCAT-TABNAME = 'ITAB_100'.
LS_FIELDCAT-FIELDNAME = 'TXZ01'.
LS_FIELDCAT-COL_POS = '6'.
LS_FIELDCAT-SELTEXT_L = '物料（工程）名称'.
LS_FIELDCAT-DDICTXT = 'L'.
LS_FIELDCAT-outputlen = '40'.
LS_FIELDCAT-just = 'L'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
CLEAR LS_FIELDCAT.
LS_FIELDCAT-TABNAME = 'ITAB_100'.
LS_FIELDCAT-FIELDNAME = 'NETWR'.
LS_FIELDCAT-COL_POS = '7'.
LS_FIELDCAT-SELTEXT_L = '采购（工程）金额（不含税）'.
LS_FIELDCAT-DDICTXT = 'L'.
LS_FIELDCAT-outputlen = '24'.
LS_FIELDCAT-just = 'R'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
CLEAR LS_FIELDCAT.
LS_FIELDCAT-TABNAME = 'ITAB_100'.
LS_FIELDCAT-FIELDNAME = 'MWSKZ'.
LS_FIELDCAT-COL_POS = '8'.
LS_FIELDCAT-SELTEXT_L = '税码'.
LS_FIELDCAT-DDICTXT = 'L'.
LS_FIELDCAT-outputlen = '4'.
LS_FIELDCAT-just = 'L'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
CLEAR LS_FIELDCAT.
LS_FIELDCAT-TABNAME = 'ITAB_100'.
LS_FIELDCAT-FIELDNAME = 'NETWR1'.
LS_FIELDCAT-COL_POS = '9'.
LS_FIELDCAT-SELTEXT_L = '采购（工程）金额（含税）'.
LS_FIELDCAT-DDICTXT = 'L'.
LS_FIELDCAT-outputlen = '22'.
LS_FIELDCAT-just = 'R'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
CLEAR LS_FIELDCAT.
LS_FIELDCAT-TABNAME = 'ITAB_100'.
LS_FIELDCAT-FIELDNAME = 'NETWR2'.
LS_FIELDCAT-COL_POS = '10'.
LS_FIELDCAT-SELTEXT_L = '运费金额（不含税）'.
LS_FIELDCAT-DDICTXT = 'L'.
LS_FIELDCAT-outputlen = '16'.
LS_FIELDCAT-just = 'R'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
CLEAR LS_FIELDCAT.
LS_FIELDCAT-TABNAME = 'ITAB_100'.
LS_FIELDCAT-FIELDNAME = 'NETWR3'.
LS_FIELDCAT-COL_POS = '11'.
LS_FIELDCAT-SELTEXT_L = '运费金额（含税）'.
LS_FIELDCAT-DDICTXT = 'L'.
LS_FIELDCAT-outputlen = '14'.
LS_FIELDCAT-just = 'R'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
CLEAR LS_FIELDCAT.
LS_FIELDCAT-TABNAME = 'ITAB_100'.
LS_FIELDCAT-FIELDNAME = 'WAERS'.
LS_FIELDCAT-COL_POS = '12'.
LS_FIELDCAT-SELTEXT_L = '币别'.
LS_FIELDCAT-DDICTXT = 'L'.
LS_FIELDCAT-outputlen = '4'.
LS_FIELDCAT-just = 'C'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
CLEAR LS_FIELDCAT.
LS_FIELDCAT-TABNAME = 'ITAB_100'.
LS_FIELDCAT-FIELDNAME = 'UKURS'.
LS_FIELDCAT-COL_POS = '12'.
LS_FIELDCAT-SELTEXT_L = '汇率'.
LS_FIELDCAT-DDICTXT = 'L'.
LS_FIELDCAT-outputlen = '10'.
LS_FIELDCAT-just = 'R'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
CLEAR LS_FIELDCAT.
LS_FIELDCAT-TABNAME = 'ITAB_100'.
LS_FIELDCAT-FIELDNAME = 'NETWR4'.
LS_FIELDCAT-COL_POS = '13'.
LS_FIELDCAT-SELTEXT_L = '金额（含税）合计'.
LS_FIELDCAT-DDICTXT = 'L'.
LS_FIELDCAT-outputlen = '14'.
LS_FIELDCAT-just = 'R'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
CLEAR LS_FIELDCAT.
LS_FIELDCAT-TABNAME = 'ITAB_100'.
LS_FIELDCAT-FIELDNAME = 'SHOU'.
LS_FIELDCAT-COL_POS = '14'.
LS_FIELDCAT-SELTEXT_L = '是否收货'.
LS_FIELDCAT-DDICTXT = 'L'.
LS_FIELDCAT-outputlen = '8'.
LS_FIELDCAT-just = 'L'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
CLEAR LS_FIELDCAT.
LS_FIELDCAT-TABNAME = 'ITAB_100'.
LS_FIELDCAT-FIELDNAME = 'STATE'.
LS_FIELDCAT-COL_POS = '15'.
LS_FIELDCAT-SELTEXT_L = '订单状态'.
LS_FIELDCAT-DDICTXT = 'L'.
LS_FIELDCAT-outputlen = '8'.
LS_FIELDCAT-just = 'L'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
CLEAR LS_FIELDCAT.
LS_FIELDCAT-TABNAME = 'ITAB_100'.
LS_FIELDCAT-FIELDNAME = 'MAEDAT'.
LS_FIELDCAT-COL_POS = '16'.
LS_FIELDCAT-SELTEXT_L = '删除日期'.
LS_FIELDCAT-DDICTXT = 'L'.
LS_FIELDCAT-outputlen = '8'.
LS_FIELDCAT-just = 'L'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
CLEAR LS_FIELDCAT.
LS_FIELDCAT-TABNAME = 'ITAB_100'.
LS_FIELDCAT-FIELDNAME = 'BATXT'.
LS_FIELDCAT-COL_POS = '17'.
LS_FIELDCAT-SELTEXT_L = '订单类型'.
LS_FIELDCAT-DDICTXT = 'L'.
LS_FIELDCAT-outputlen = '20'.
LS_FIELDCAT-just = 'L'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
ENDFORM. " E01_FIELDCAT_INIT
*&---------------------------------------------------------------------*
*& Form E03_EVENTTAB_BUILD
*&---------------------------------------------------------------------*
* text
*----------------------------------------------------------------------*
* -->P_GT_EVENTS[] text
*----------------------------------------------------------------------*
FORM E03_EVENTTAB_BUILD USING E03_LT_EVENTS TYPE SLIS_T_EVENT.
DATA: LS_EVENT TYPE SLIS_ALV_EVENT.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = E03_LT_EVENTS.
READ TABLE E03_LT_EVENTS WITH KEY NAME = SLIS_EV_TOP_OF_PAGE
INTO LS_EVENT.
IF SY-SUBRC = 0.
MOVE GC_FORMNAME_TOP_OF_PAGE TO LS_EVENT-FORM.
APPEND LS_EVENT TO E03_LT_EVENTS.
ENDIF.
ENDFORM. " E03_EVENTTAB_BUILD
*&---------------------------------------------------------------------*
*& Form E04_COMMENT_BUILD
*&---------------------------------------------------------------------*
* text
*----------------------------------------------------------------------*
* -->P_GT_LIST_TOP_OF_PAGE[] text
*----------------------------------------------------------------------*
FORM E04_COMMENT_BUILD USING E04_LT_TOP_OF_PAGE TYPE SLIS_T_LISTHEADER.
DATA: LS_LINE TYPE SLIS_LISTHEADER.
CLEAR LS_LINE.
LS_LINE-TYP = 'H'.
select single butxt into t_bukrs from t001 where bukrs eq P_bukrs.
LS_LINE-INFO = t_bukrs.
APPEND LS_LINE TO E04_LT_TOP_OF_PAGE.
*
CLEAR LS_LINE.
LS_LINE-TYP = 'S'.
LS_LINE-KEY = '采购及工程订单明细表'.
APPEND LS_LINE TO E04_LT_TOP_OF_PAGE.
CLEAR LS_LINE.
CONCATENATE '工厂：' S_WERKS-LOW '-' S_WERKS-HIGH INTO v_program.
CONCATENATE '程式编号：××××××' ' ' '印表时间：' SY-DATUM(4) '/' SY-DATUM+4(2)
'/' SY-DATUM+6(2) '/' SY-UZEIT(2) ':' SY-UZEIT+2(2) ':' SY-UZEIT+4(2) INTO V_PRINTDATE.
LS_LINE-TYP = 'S'.
LS_LINE-KEY = v_program.
LS_LINE-INFO = V_PRINTDATE.
APPEND LS_LINE TO E04_LT_TOP_OF_PAGE.
ENDFORM. " E04_COMMENT_BUILD
*&---------------------------------------------------------------------*
* 检查权限
*----------------------------------------------------------------------*
* --> p1 text
* <-- p2 text
*----------------------------------------------------------------------*
FORM author_check .
select * into corresponding fields of table itab_tvko
from tvko
where vkorg = S_WERKS.
loop at itab_tvko.
AUTHORITY-CHECK OBJECT 'M_MSEG_WMB'
ID 'WERKS' FIELD itab_tvko-vkorg
ID 'ACTVT' DUMMY.
IF SY-SUBRC NE 0.
v_auth = 'X'.
message s015 with '工厂' itab_tvko-vkorg.
ENDIF.
ENDLOOP.
ENDFORM. " author_check .