ECS配置lamp环境

其他 2019-01-01 18:01:22 阅读次数: 0

1、安装apache

　　1.1 安装apache

[root@nmserver-7 ~]# yum install httpd httpd-devel

　　1.2 启动apache服务

[root@nmserver-7 ~]# systemctl start  httpd

　　1.3 设置httpd服务开机启动

[root@nmserver-7 ~]# systemctl enable  httpd
Created symlink from /etc/systemd/system/multi-user.target.wants/httpd.service to /usr/lib/systemd/system/httpd.service.

　　1.4 查看服务状态

[root@nmserver-7 ~]# systemctl status httpd 
● httpd.service - The Apache HTTP Server
   Loaded: loaded (/usr/lib/systemd/system/httpd.service; enabled; vendor preset: disabled)
   Active: active (running) since 五 2017-07-21 17:21:37 CST; 6min ago
     Docs: man:httpd(8)
           man:apachectl(8)
 Main PID: 2449 (httpd)
   Status: "Total requests: 11; Current requests/sec: 0; Current traffic:   0 B/sec"
   CGroup: /system.slice/httpd.service
           ├─2449 /usr/sbin/httpd -DFOREGROUND
           ├─2450 /usr/sbin/httpd -DFOREGROUND
           ├─2451 /usr/sbin/httpd -DFOREGROUND
           ├─2452 /usr/sbin/httpd -DFOREGROUND
           ├─2453 /usr/sbin/httpd -DFOREGROUND
           ├─2454 /usr/sbin/httpd -DFOREGROUND
           ├─2493 /usr/sbin/httpd -DFOREGROUND
           ├─2494 /usr/sbin/httpd -DFOREGROUND
           └─2495 /usr/sbin/httpd -DFOREGROUND

7月 21 17:21:35 nmserver-7.test.com systemd[1]: Starting The Apache HTTP Server...
7月 21 17:21:36 nmserver-7.test.com httpd[2449]: AH00558: httpd: Could not reliably determine the server's fully q...ssage
7月 21 17:21:37 nmserver-7.test.com systemd[1]: Started The Apache HTTP Server.
Hint: Some lines were ellipsized, use -l to show in full.

　　1.5 防火墙设置开启80端口

[root@nmserver-7 ~]# firewall-cmd --permanent --zone=public  --add-service=http
success
[root@nmserver-7 ~]# firewall-cmd --permanent --zone=public  --add-service=https
success
[root@nmserver-7 ~]# firewall-cmd --reload
success

　　这里可能会提示错误

FirewallD is not running


1.通过systemctl status firewalld查看firewalld状态，发现当前是dead状态，即防火墙未开启。

2.通过systemctl start firewalld开启防火墙，没有任何提示即开启成功。

3.再次通过systemctl status firewalld查看firewalld状态，显示running即已开启了。

4.如果要关闭防火墙设置，可能通过systemctl stop firewalld这条指令来关闭该功能。

5.END

1.6确认80端口监听中

  
[root@nmserver-7 ~]# netstat -tulp
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       PID/Program name    
tcp        0      0 0.0.0.0:ssh             0.0.0.0:*               LISTEN      1084/sshd           
tcp        0      0 localhost:smtp          0.0.0.0:*               LISTEN      1486/master         
tcp6       0      0 [::]:ssh                [::]:*                  LISTEN      1084/sshd           
tcp6       0      0 localhost:smtp          [::]:*                  LISTEN      1486/master         
tcp6       0      0 [::]:http               [::]:*                  LISTEN      2449/httpd          
udp        0      0 localhost:323           0.0.0.0:*                           592/chronyd         
udp6       0      0 localhost:323           [::]:*                              592/chronyd
 

这时候可能你的服务器还是不能访问

这是因为阿里云的安全策略还没有添加

重新配置安全组公网规则

原因分析：安全组默认没有放行网站使用的端口（如 80 端口）。您需要自行放行该接口。

解决方法：

  1. 登录 ECS 控制台，找到该实例。
  2. 单击实例 ID，进入详情页，再单击本实例安全组 > 配置规则 >添加安全组规则。
  3. 根据网站使用的端口配置新的安全组规则，放行网站使用的端口，最后单击确定。

1.8 查服务器IP

  
[root@nmserver-7 ~]# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:0c:29:56:bc:cf brd ff:ff:ff:ff:ff:ff
    inet 192.168.8.9/24 brd 192.168.8.255 scope global ens33
       valid_lft forever preferred_lft forever
    inet6 fe80::20c:29ff:fe56:bccf/64 scope link 
       valid_lft forever preferred_lft forever
3: bridge0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN qlen 1000
    link/ether ea:89:d5:c7:32:73 brd ff:ff:ff:ff:ff:ff
 

　1.9 浏览器登陆

当你看到这个的时候，Apache已经安装完成了

2、安装mysql

　　2.1安装mysql

[root@nmserver-7 ~]# yum install mariadb mariadb-server mariadb-libs mariadb-devel
root@nmserver-7 ~]# rpm -qa |grep maria
mariadb-libs-5.5.52-1.el7.i686
mariadb-5.5.52-1.el7.i686
mariadb-server-5.5.52-1.el7.i686
mariadb-devel-5.5.52-1.el7.i686

　　2.2 开启mysql服务，并设置开机启动，检查mysql状态

  
[root@nmserver-7 ~]# systemctl start  mariadb 
[root@nmserver-7 ~]# systemctl enable  mariadb 
Created symlink from /etc/systemd/system/multi-user.target.wants/mariadb.service to /usr/lib/systemd/system/mariadb.service.
[root@nmserver-7 ~]# systemctl status  mariadb 
● mariadb.service - MariaDB database server
   Loaded: loaded (/usr/lib/systemd/system/mariadb.service; enabled; vendor preset: disabled)
   Active: active (running) since 六 2017-07-22 21:19:20 CST; 21s ago
 Main PID: 9603 (mysqld_safe)
   CGroup: /system.slice/mariadb.service
           ├─9603 /bin/sh /usr/bin/mysqld_safe --basedir=/usr
           └─9760 /usr/libexec/mysqld --basedir=/usr --datadir=/v...

7月 22 21:19:15 nmserver-7.test.com mariadb-prepare-db-dir[9524]: ...
7月 22 21:19:15 nmserver-7.test.com mariadb-prepare-db-dir[9524]: ...
7月 22 21:19:15 nmserver-7.test.com mariadb-prepare-db-dir[9524]: ...
7月 22 21:19:15 nmserver-7.test.com mariadb-prepare-db-dir[9524]: ...
7月 22 21:19:15 nmserver-7.test.com mariadb-prepare-db-dir[9524]: ...
7月 22 21:19:15 nmserver-7.test.com mariadb-prepare-db-dir[9524]: ...
7月 22 21:19:15 nmserver-7.test.com mariadb-prepare-db-dir[9524]: ...
7月 22 21:19:16 nmserver-7.test.com mysqld_safe[9603]: 170722 21...
7月 22 21:19:16 nmserver-7.test.com mysqld_safe[9603]: 170722 21...
7月 22 21:19:20 nmserver-7.test.com systemd[1]: Started MariaDB ...
 
  
[root@nmserver-7 ~]# netstat -tulp
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       PID/Program name    
tcp        0      0 0.0.0.0:ssh             0.0.0.0:*               LISTEN      1084/sshd           
tcp        0      0 0.0.0.0:mysql           0.0.0.0:*               LISTEN      9760/mysqld         
tcp6       0      0 [::]:ssh                [::]:*                  LISTEN      1084/sshd           
tcp6       0      0 [::]:http               [::]:*                  LISTEN      2449/httpd          
udp        0      0 localhost:323           0.0.0.0:*                           592/chronyd         
udp6       0      0 localhost:323           [::]:*                              592/chronyd
 

　　2.3 数据库安全设置

  
[root@nmserver-7 ~]# mysql_secure_installation 

NOTE: RUNNING ALL PARTS OF THIS SCRIPT IS RECOMMENDED FOR ALL MariaDB
      SERVERS IN PRODUCTION USE!  PLEASE READ EACH STEP CAREFULLY!

In order to log into MariaDB to secure it, we'll need the current
password for the root user.  If you've just installed MariaDB, and
you haven't set the root password yet, the password will be blank,
so you should just press enter here.

Enter current password for root (enter for none):   //输入root的密码，首次安装直接按回车即可
OK, successfully used password, moving on...

Setting the root password ensures that nobody can log into the MariaDB
root user without the proper authorisation.

Set root password? [Y/n] y
New password: 
Re-enter new password: 
Password updated successfully!
Reloading privilege tables..
 ... Success!


By default, a MariaDB installation has an anonymous user, allowing anyone
to log into MariaDB without having to have a user account created for
them.  This is intended only for testing, and to make the installation
go a bit smoother.  You should remove them before moving into a
production environment.

Remove anonymous users? [Y/n] y
 ... Success!

Normally, root should only be allowed to connect from 'localhost'.  This
ensures that someone cannot guess at the root password from the network.

Disallow root login remotely? [Y/n] n
 ... skipping.

By default, MariaDB comes with a database named 'test' that anyone can
access.  This is also intended only for testing, and should be removed
before moving into a production environment.

Remove test database and access to it? [Y/n] y
 - Dropping test database...
 ... Success!
 - Removing privileges on test database...
 ... Success!

Reloading the privilege tables will ensure that all changes made so far
will take effect immediately.

Reload privilege tables now? [Y/n] y
 ... Success!

Cleaning up...

All done!  If you've completed all of the above steps, your MariaDB
installation should now be secure.

Thanks for using MariaDB!
 

　　2.4 登陆数据库测试

  
[root@nmserver-7 ~]# mysql -uroot -p
Enter password: 
Welcome to the MariaDB monitor.  Commands end with ; or \g.
Your MariaDB connection id is 11
Server version: 5.5.52-MariaDB MariaDB Server

Copyright (c) 2000, 2016, Oracle, MariaDB Corporation Ab and others.

Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.

MariaDB [(none)]> show databases;
+--------------------+
| Database           |
+--------------------+
| information_schema |
| mysql              |
| performance_schema |
+--------------------+
3 rows in set (0.02 sec)

MariaDB [(none)]>
 

3、安装PHP

/**这里安装的是PHP5.4.16 如果要安装php7.1请绕道文末**/

　　3.1 安装php

[root@nmserver-7 ~]# yum -y install php
[root@nmserver-7 ~]# rpm -ql php
/etc/httpd/conf.d/php.conf
/etc/httpd/conf.modules.d/10-php.conf
/usr/lib/httpd/modules/libphp5.so
/usr/share/httpd/icons/php.gif
/var/lib/php/session

　　3.2 将php与mysql关联起来

  
[root@nmserver-7 ~]# yum install php-mysql
[root@nmserver-7 ~]# rpm -ql php-mysql
/etc/php.d/mysql.ini
/etc/php.d/mysqli.ini
/etc/php.d/pdo_mysql.ini
/usr/lib/php/modules/mysql.so
/usr/lib/php/modules/mysqli.so
/usr/lib/php/modules/pdo_mysql.so
 

　　3.3 安装常用PHP模块

[root@nmserver-7 ~]# yum install -y php-gd php-ldap php-odbc php-pear php-xml php-xmlrpc php-mbstring php-snmp php-soap curl curl-devel php-bcmath

4 测试PHP

  
[root@nmserver-7 ~]# cd  /var/www/html/
[root@nmserver-7 html]# ls
[root@nmserver-7 html]# pwd
/var/www/html
[root@nmserver-7 html]# vi info.php

<?php
        phpinfo();
?>
~                                                                                        
~                                                                                        
~                                                                                        
~                                                                                        
~                                                                                        
~                                                                                        
~                                                                                        
~                                                                            
:wq
 

　　3.5重启apache服务器

[root@nmserver-7 html]# systemctl restart httpd

　　3.6测试PHP

　　在自己电脑浏览器输入ip/info.php，你可以看到已经安装的模块；

4 安装php7.1

如果你已经安装过老版本

//卸载老版本

 -y remove php*

//设置安装源

rpm -Uvh https://dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm

rpm -Uvh https://mirror.webtatic.com/yum/el7/webtatic-release.rpm

//查看

yum search php71w

所有的插件如下

mod_php71w.x86_64 : PHP module for the Apache HTTP Server
php71w-bcmath.x86_64 : A module for PHP applications for using the bcmath library
php71w-cli.x86_64 : Command-line interface for PHP
php71w-common.x86_64 : Common files for PHP
php71w-dba.x86_64 : A database abstraction layer module for PHP applications
php71w-devel.x86_64 : Files needed for building PHP extensions
php71w-embedded.x86_64 : PHP library for embedding in applications
php71w-enchant.x86_64 : Enchant spelling extension for PHP applications
php71w-fpm.x86_64 : PHP FastCGI Process Manager
php71w-gd.x86_64 : A module for PHP applications for using the gd graphics library
php71w-imap.x86_64 : A module for PHP applications that use IMAP
php71w-interbase.x86_64 : A module for PHP applications that use Interbase/Firebird databases php71w-intl.x86_64 : Internationalization extension for PHP applications php71w-ldap.x86_64 : A module for PHP applications that use LDAP php71w-mbstring.x86_64 : A module for PHP applications which need multi-byte string handling php71w-mcrypt.x86_64 : Standard PHP module provides mcrypt library support php71w-mysql.x86_64 : A module for PHP applications that use MySQL databases php71w-mysqlnd.x86_64 : A module for PHP applications that use MySQL databases php71w-odbc.x86_64 : A module for PHP applications that use ODBC databases php71w-opcache.x86_64 : An opcode cache Zend extension php71w-pdo.x86_64 : A database access abstraction module for PHP applications php71w-pdo_dblib.x86_64 : MSSQL database module for PHP php71w-pear.noarch : PHP Extension and Application Repository framework php71w-pecl-apcu.x86_64 : APCu - APC User Cache php71w-pecl-apcu-devel.x86_64 : APCu developer files (header) php71w-pecl-geoip.x86_64 : Extension to map IP addresses to geographic places php71w-pecl-igbinary.x86_64 : Replacement for the standard PHP serializer php71w-pecl-igbinary-devel.x86_64 : Igbinary developer files (header) php71w-pecl-imagick.x86_64 : Provides a wrapper to the ImageMagick library php71w-pecl-imagick-devel.x86_64 : Imagick developer files (header) php71w-pecl-libsodium.x86_64 : Wrapper for the Sodium cryptographic library php71w-pecl-memcached.x86_64 : Extension to work with the Memcached caching daemon php71w-pecl-mongodb.x86_64 : PECL package MongoDB driver php71w-pecl-redis.x86_64 : Extension for communicating with the Redis key-value store php71w-pecl-xdebug.x86_64 : PECL package for debugging PHP scripts php71w-pgsql.x86_64 : A PostgreSQL database module for PHP php71w-phpdbg.x86_64 : Interactive PHP debugger php71w-process.x86_64 : Modules for PHP script using system process interfaces php71w-pspell.x86_64 : A module for PHP applications for using pspell interfaces php71w-recode.x86_64 : A module for PHP applications for using the recode library php71w-snmp.x86_64 : A module for PHP applications that query SNMP-managed devices php71w-soap.x86_64 : A module for PHP applications that use the SOAP protocol php71w-tidy.x86_64 : Standard PHP module provides tidy library support php71w-xml.x86_64 : A module for PHP applications which use XML php71w-xmlrpc.x86_64 : A module for PHP applications which use the XML-RPC protocol

//安装php以及扩展

//可以根据自己的需求选择

yum install php71w php71w-fpm php71w-cli php71w-common php71w-devel php71w-gd php71w-pdo php71w-mysql php71w-mbstring php71w-bcmath

//开启服务

service php-fpm start

//设置开机启动

systemctl enable php-fpm.service

//检查开机自启动是否设置成功

systemctl list-dependencies | grep php-fpm

ps -ef | grep php-fpm

//上面安装最基本的扩展包如果还想使用其他扩展包自己手动安装扩展命令

yum search php71w    #查看所有包命令

yum install php71w php71w-pdo     #完整命令，php71w-pdo 为自己想要安装的包

测试PHP

  
[root@nmserver-7 ~]# cd  /var/www/html/
[root@nmserver-7 html]# ls
[root@nmserver-7 html]# pwd
/var/www/html
[root@nmserver-7 html]# vi info.php

<?php
        phpinfo();
?>
~                                                                                        
~                                                                                        
~                                                                                        
~                                                                                        
~                                                                                        
~                                                                                        
~                                                                                        
~                                                                            
:wq

//重启Apache

 systemctl restart httpd

4、设置虚拟主机

　　4.1 修改apache默认的网站根目录

　　apache配置文件路径：/etc/httpd/conf/httpd.conf

　　DocumentRoot "/var/www/html"  修改为 DocumentRoot "/var/www"

　　

　　

　　4.2 添加站点

<VirtualHost *:80>
    DocumentRoot "/var/www/abc"
    ServerName www.abc.com
    ServerAlias abc.com
    <Directory "/var/www/abc">
        Options FollowSymLinks ExecCGI
        AllowOverride All
        Order allow,deny
        Allow from all
        Require all granted
    </Directory>
</VirtualHost>

<VirtualHost *:80>
    DocumentRoot "/var/www/lang"
    ServerName lang.abc.com
    ServerAlias lang.abc.com
    <Directory "/var/www/lang">
        Options FollowSymLinks ExecCGI
        AllowOverride All
        Order allow,deny
        Allow from all
        Require all granted
    </Directory>
</VirtualHost>

　　

　　//重启Apache

 systemctl restart httpd




猜你喜欢

转载自www.cnblogs.com/qq254980080/p/10205301.html
今日推荐
中国码农的“35岁魔咒”
蘭雅 CorelDRAW 插件 2024.5.1 国际劳动节版，免费下载
Arc Browser for Windows 1.0 正式 GA
90后程序员开发视频搬运软件、不到一年获利超 700 万，结局很刑！
《美国对全球网络空间安全与发展的威胁和破坏》报告发布
周排行
Java基础复习_day13_Collection集合
2018.11.16 c语言学习经验
且看Java内置四大核心函数式接口
小程序云开发中数据库的数据分段和显示图片
python的函数
Web-JS进阶
【干货】C++常用代码积累笔记大全
Spring的ioc操作 与 IOC底层原理
构建之法20191121-11 Scrum立会报告+燃尽图 07
Spring boot之Hello World访问404
每日归档
更多
2024-05-05(0)
2024-05-04(7)
2024-05-03(19)
2024-05-02(0)
2024-05-01(4)
2024-04-30(1)
2024-04-29(40)
2024-04-28(0)
2024-04-27(56)
2024-04-26(39)

代码天地 © 2018 codetd.com

境外服务器   最新电视剧2022