LAMP环境搭建与配置（一）

LAMP是Linux Apache MySQL PHP 的简写，即把Apache、MySQL以及PHP安装在Linux系统上，组成一个环境来运行PHP的脚本语言，通常是网站。

Apache是最常用的web服务软件，而MySQL是比较小型的数据库软件，这两个软件以及PHP都可以安装在一台机器上，也可以分开安装，但Apache和PHP必须安装在同一台机器上，因为PHP是作为Apache的一个模块存在的。

11.1 安装MySQL

MySQL官网
MySQL是一个关系型数据库，由瑞典MySQL AB 公司开发，目前属于 Oracle 旗下产品，关系数据库将数据保存在不同的表中，而不是将所有数据放在一个大仓库内，这样就增加了速度并提高了灵活性。
MariaDB官网
MariaDB是MySQL的一个分支，由MySQL原作者开发，MariaDB 5.5版本对应MySQL 5.5版本，而MariaDB 10.0版本对应MySQL 5.6版本，有以下版本：
1. Community 社区版
2. Enterprise 企业版
3. GA（Generally Available）通用版
4. DMR（Development Milestone Release）开发里程碑发布版
5. RC（Release Candidate）发行候选版
6. Alpha 内部测试版
7. Beta 开放测试版

MySQL的最新版本是 5.7GA和8.0DMR ，MariaDB的最新版本是10.3.7 。

下载软件包

我们可以到官网去下载对应版本的MySQL/MariaDB的包，也可以到 r.aminglinux.com 下载，在这里，我使用的是免编译的二进制包。在CentOS7之前的版本都有区分32位和64位，CentOS7可以直接选择64位的包下载，带有x86_64字样的就是64位的包，带有i686字样的就是32位的包。

查看linux是多少位的:

[root@localhost ~]# uname -i
x86_64

下载MySQL5.6的二进制包：

[root@localhost ~]# cd /usr/local/src/    \\建议以后将所有软件包都放至这个文件夹
[root@localhost src]# wget http://mirrors.sohu.com/mysql/MySQL-5.6/mysql-5.6.36-linux-glibc2.5-x86_64.tar.gz
正在解析主机 mirrors.sohu.com (mirrors.sohu.com)... 221.236.12.140
正在连接 mirrors.sohu.com (mirrors.sohu.com)|221.236.12.140|:80... 已连接。
已发出 HTTP 请求，正在等待回应... 200 OK
长度：316320366 (302M) [application/octet-stream]
正在保存至: “mysql-5.6.36-linux-glibc2.5-x86_64.tar.gz”

100%[=========================================================================>] 316,320,366  475KB/s 用时 14m 48s

2018-06-26 14:47:30 (348 KB/s) - 已保存 “mysql-5.6.36-linux-glibc2.5-x86_64.tar.gz” [316320366/316320366])

初始化

初始化过程如下：

解压下载的包：

[root@localhost src]# tar zxvf mysql-5.6.36-linux-glibc2.5-x86_64.tar.gz

移动解压完的目录并更改名字为mysql（容易出现的错误，local下已经存在mysql文件，如果这样移动，会变成移动到mysql下，这样就会报错，mv前提前进入local看下是否已存在mysql文件夹）

[root@localhost src]# [ -d /usr/local/mysql ] && mv /usrlocal/mysql /usr/local/mysql_old
[root@localhost src]# mv mysql-5.6.36-linux-glibc2.5-x86_64 /usr/local/mysql

上面用到特殊符号 && ，它表示当前面的命令执行成功时，才会执行后面的命令。如果 /usr/local/mysql 目录已经存在，就要把它改个名字，否则后面步骤会出错。

建立MySQL用户，启动mysql需要该用户：

[root@localhost src]# useradd -s /sbin/nologin mysql

创建datadir，数据库文件会放到这里面

[root@localhost mysql]# mkdir -p /data/mysql

更改权限，否则后面会出错

[root@localhost mysql]# chown -R mysql:mysql /data/mysql

安装mysql，进行初始化，指定用户为mysql，指定数据存放地址/data/mysql

[root@localhost mysql]# ./scripts/mysql_install_db --user=mysql --datadir=/data/mysql
FATAL ERROR: please install the following Perl modules before executing ./scripts/mysql_install_db:
Data::Dumper

上面出错了，有提示“Dumper”，我们可以查查

[root@localhost mysql]# yum list |grep perl |grep -i Dumper
perl-Data-Dumper.x86_64                   2.145-3.el7                    @base  
perl-Data-Dumper-Concise.noarch           2.020-6.el7                    epel   
perl-Data-Dumper-Names.noarch             0.03-17.el7                    epel   
perl-XML-Dumper.noarch                    0.81-17.el7                    base

不知道的情况下，可以一个个去安装上面的包，这里我们知道是第一个，使用yum安装

[root@localhost mysql]# yum install -y perl-perl-Data-Dumper.x86_64

再使用命令去初始化：

[root@localhost mysql]# ./scripts/mysql_install_db --user=mysql --datadir=/data/mysql
FATAL ERROR: The parent directory for the data directory '/data/mysql' does not exist.
If that path was really intended, please create that directory path and then
restart this script.
If some other path was intended, please use the correct path when restarting this script.

提示没有这样的目录或文件，我们需要在/data/前面加上绝对路径

[root@localhost mysql]# ./scripts/mysql_install_db --user=mysql --datadir=/usr/local/mysql/data/mysql
Installing MySQL system tables..../bin/mysqld: error while loading shared libraries: libaio.so.1: cannot open shared object file: No such file or directory

又出错了，提示没有 libaio.so.1 ,没有就安装：

[root@localhost mysql]# yum install -y libaio*

安装完之后再次执行初始化：

[root@localhost mysql]# ./scripts/mysql_install_db --user=mysql --datadir=/usr/local/mysql/data/mysql
Installing MySQL system tables...2018-06-26 15:59:53 0 [Warning] TIMESTAMP with implicit DEFAULT value is deprecated. Please use --explicit_defaults_for_timestamp server option (see documentation for more details).
2018-06-26 15:59:53 0 [Note] Ignoring --secure-file-priv value as server is running with --bootstrap.
2018-06-26 15:59:53 0 [Note] ./bin/mysqld (mysqld 5.6.36) starting as process 3349 ...
2018-06-26 15:59:53 3349 [Note] InnoDB: Using atomics to ref count buffer pool pages
2018-06-26 15:59:53 3349 [Note] InnoDB: The InnoDB memory heap is disabled
2018-06-26 15:59:53 3349 [Note] InnoDB: Mutexes and rw_locks use GCC atomic builtins
2018-06-26 15:59:53 3349 [Note] InnoDB: Memory barrier is not used
2018-06-26 15:59:53 3349 [Note] InnoDB: Compressed tables use zlib 1.2.3
2018-06-26 15:59:53 3349 [Note] InnoDB: Using Linux native AIO
2018-06-26 15:59:53 3349 [Note] InnoDB: Using CPU crc32 instructions
2018-06-26 15:59:53 3349 [Note] InnoDB: Initializing buffer pool, size = 128.0M
2018-06-26 15:59:53 3349 [Note] InnoDB: Completed initialization of buffer pool
2018-06-26 15:59:53 3349 [Note] InnoDB: The first specified data file ./ibdata1 did not exist: a new database to be created!
2018-06-26 15:59:53 3349 [Note] InnoDB: Setting file ./ibdata1 size to 12 MB
2018-06-26 15:59:53 3349 [Note] InnoDB: Database physically writes the file full: wait...
2018-06-26 15:59:53 3349 [Note] InnoDB: Setting log file ./ib_logfile101 size to 48 MB
2018-06-26 15:59:54 3349 [Note] InnoDB: Setting log file ./ib_logfile1 size to 48 MB
2018-06-26 15:59:55 3349 [Note] InnoDB: Renaming log file ./ib_logfile101 to ./ib_logfile0
2018-06-26 15:59:55 3349 [Warning] InnoDB: New log files created, LSN=45781
2018-06-26 15:59:55 3349 [Note] InnoDB: Doublewrite buffer not found: creating new
2018-06-26 15:59:55 3349 [Note] InnoDB: Doublewrite buffer created
2018-06-26 15:59:55 3349 [Note] InnoDB: 128 rollback segment(s) are active.
2018-06-26 15:59:55 3349 [Warning] InnoDB: Creating foreign key constraint system tables.
2018-06-26 15:59:55 3349 [Note] InnoDB: Foreign key constraint system tables created
2018-06-26 15:59:55 3349 [Note] InnoDB: Creating tablespace and datafile system tables.
2018-06-26 15:59:55 3349 [Note] InnoDB: Tablespace and datafile system tables created.
2018-06-26 15:59:55 3349 [Note] InnoDB: Waiting for purge to start
2018-06-26 15:59:55 3349 [Note] InnoDB: 5.6.36 started; log sequence number 0
2018-06-26 15:59:55 3349 [Note] Binlog end
2018-06-26 15:59:55 3349 [Note] InnoDB: FTS optimize thread exiting.
2018-06-26 15:59:55 3349 [Note] InnoDB: Starting shutdown...
2018-06-26 15:59:57 3349 [Note] InnoDB: Shutdown completed; log sequence number 1625977
OK

Filling help tables...2018-06-26 15:59:57 0 [Warning] TIMESTAMP with implicit DEFAULT value is deprecated. Please use --explicit_defaults_for_timestamp server option (see documentation for more details).
2018-06-26 15:59:57 0 [Note] Ignoring --secure-file-priv value as server is running with --bootstrap.
2018-06-26 15:59:57 0 [Note] ./bin/mysqld (mysqld 5.6.36) starting as process 3371 ...
2018-06-26 15:59:57 3371 [Note] InnoDB: Using atomics to ref count buffer pool pages
2018-06-26 15:59:57 3371 [Note] InnoDB: The InnoDB memory heap is disabled
2018-06-26 15:59:57 3371 [Note] InnoDB: Mutexes and rw_locks use GCC atomic builtins
2018-06-26 15:59:57 3371 [Note] InnoDB: Memory barrier is not used
2018-06-26 15:59:57 3371 [Note] InnoDB: Compressed tables use zlib 1.2.3
2018-06-26 15:59:57 3371 [Note] InnoDB: Using Linux native AIO
2018-06-26 15:59:57 3371 [Note] InnoDB: Using CPU crc32 instructions
2018-06-26 15:59:57 3371 [Note] InnoDB: Initializing buffer pool, size = 128.0M
2018-06-26 15:59:57 3371 [Note] InnoDB: Completed initialization of buffer pool
2018-06-26 15:59:57 3371 [Note] InnoDB: Highest supported file format is Barracuda.
2018-06-26 15:59:57 3371 [Note] InnoDB: 128 rollback segment(s) are active.
2018-06-26 15:59:57 3371 [Note] InnoDB: Waiting for purge to start
2018-06-26 15:59:57 3371 [Note] InnoDB: 5.6.36 started; log sequence number 1625977
2018-06-26 15:59:57 3371 [Note] Binlog end
2018-06-26 15:59:57 3371 [Note] InnoDB: FTS optimize thread exiting.
2018-06-26 15:59:57 3371 [Note] InnoDB: Starting shutdown...
2018-06-26 15:59:59 3371 [Note] InnoDB: Shutdown completed; log sequence number 1625987
OK

To start mysqld at boot time you have to copy
support-files/mysql.server to the right place for your system

PLEASE REMEMBER TO SET A PASSWORD FOR THE MySQL root USER !
To do so, start the server, then issue the following commands:

  ./bin/mysqladmin -u root password 'new-password'
  ./bin/mysqladmin -u root -h localhost.localdomain password 'new-password'

Alternatively you can run:

  ./bin/mysql_secure_installation

which will also give you the option of removing the test
databases and anonymous user created by default.  This is
strongly recommended for production servers.

See the manual for more instructions.

You can start the MySQL daemon with:

  cd . ; ./bin/mysqld_safe &

You can test the MySQL daemon with mysql-test-run.pl

  cd mysql-test ; perl mysql-test-run.pl

Please report any problems at http://bugs.mysql.com/

The latest information about MySQL is available on the web at

  http://www.mysql.com

Support MySQL by buying support/licenses at http://shop.mysql.com

WARNING: Found existing config file ./my.cnf on the system.
Because this file might be in use, it was not replaced,
but was used in bootstrap (unless you used --defaults-file)
and when you later start the server.
The new default config file was created as ./my-new.cnf,
please compare it with your file and take the changes you need.

WARNING: Default config file /etc/my.cnf exists on the system
This file will be read by default by the MySQL server
If you do not want to use this, either remove it, or use the
--defaults-file argument to mysqld_safe when starting the server

可以看到，上面出现了两个OK，这就说明初始化成功，还可以检验一下

[root@localhost mysql]# echo $?
0

输出为0，说明上一条命令已经正确执行

配置MySQL

初始化完成之后，接下来就是配置

首先复制配置文件：

[root@localhost mysql]# cp support-files/my-default.cnf /etc/my.cnf
cp：是否覆盖"/etc/my.cnf"？ y

打开配置文件，做以下修改：

[mysqld]

# Remove leading # and set to the amount of RAM for the most important data
# cache in MySQL. Start at 70% of total RAM for dedicated server, else 10%.
 innodb_buffer_pool_size = 128M

# Remove leading # to turn on a very important data integrity option: logging
# changes to the binary log between backups.
# log_bin = 

# These are commonly set, remove the # and set as required.
 basedir = /usr/local/mysql
 datadir = /usr/local/mysql/data/mysql
 port = 3306
# server_id = .....
# socket = .....

# Remove leading # to set options mainly useful for reporting servers.

其中，basedir 是MySQL包所在的路径，datadir 是定义的存放数据的地方，port 定义MySQL服务监听的端口，如果不定义默认就是3306，server_id定义该MySQL服务的ID号，用于做主从配置

然后复制启动脚本文件并修改其属性：

[root@localhost mysql]# cp support-files/mysql.server /etc/init.d/mysqld
[root@localhost mysql]# chmod 755 /etc/init.d/mysqld

然后修改启动脚本：

[root@localhost mysql]# vim /etc/init.d/mysqld

找到basedir和datadir将内容更改如下：
basedir=/usr/local/mysql
datadir=/usr/local/mysql/data/mysql

接下来将启动脚本加入系统服务项并设置开机启动：

[root@localhost mysql]# chkconfig --add mysqld
[root@localhost mysql]# chkconfig mysqld on

最后启动服务：

[root@localhost mysql]# service mysqld start
Starting MySQL.Logging to '/usr/local/mysql/data/mysql/localhost.localdomain.err'.
. SUCCESS!

上面已经启动成功，如果没有成功启动，我们也可以到/data/mysql目录下查看错误日志

检查MySQL是否启动的命令为：

[root@localhost mysql]# ps aux |grep mysqld       //结果应该大于2行
root       3494  0.0  0.0  11816  1612 pts/0    S    16:32   0:00 /bin/sh /usr/local/mysql/bin/mysqld_safe --datadir=/usr/local/mysql/data/mysql --pid-file=/usr/local/mysql/data/mysql/localhost.localdomain.pid
mysql      3655  0.5 24.3 1300820 453380 pts/0  Sl   16:32   0:01 /usr/local/mysql/bin/mysqld --basedir=/usr/local/mysql --datadir=/usr/local/mysql/data/mysql --plugin-dir=/usr/local/mysql/lib/plugin --user=mysql --log-error=/usr/local/mysql/data/mysql/localhost.localdomain.err --pid-file=/usr/local/mysql/data/mysql/localhost.localdomain.pid --port=3306
root       3681  0.0  0.0 112720   984 pts/0    S+   16:36   0:00 grep --color=auto mysqld
[root@localhost mysql]# netstat -lntp |grep 3306    //查看是否在监听3306端口
tcp6       0      0 :::3306                 :::*                    LISTEN      3655/mysqld

如果是上面这样的情况，说明MySQL启动成功

另外，停止MySQL服务：

[root@localhost mysql]# service mysqld stop

还可以以命令行的方式启动脚本，–defaults-file指定配置文件，指定用户，指定目录，最后加上&符号，放到后台执行

[root@localhost mysql]#/usr/local/mysql/bin/mysqld_safe --defaults-file=/etc/my.cnf --user=mysql --datadir=/data/mysql &

以命令行的方式启动的mysql脚本不能直接stop，可以使用killall停止服务

使用killall会停止当前的写读操作，再将没有写入到磁盘中的数据写到磁盘里面去，写完之后再将进程杀死

如果遇到mysql的进程杀不死，可能说明数据量比较大，在慢慢写入磁盘，这时候不要使用kill -9强制杀死进程，可能会损坏数据

最后，MariaDB的安装方法与MySQL大致相同，这里不做更多阐述。

11.2 安装Apache

Apache官网
Apache是一个基金会的名字，httpd才是我们要安装的软件包，早期它的名字就叫apache 。

编译安装apache之前先安装apr以及apr-util，apr和apr-util是一个通用的函数库，主要为上层应用提供支持，它让httpd可以不关心底层的操作系统平台，可以很方便地移植（从linux移植到windows）。

下载httpd：

[root@localhost mysql]# cd /usr/local/src
[root@localhost src]# wget http://mirrors.cnnic.cn/apache/httpd/httpd-2.4.33.tar.gz

下载apr：

[root@localhost src]# wget http://mirrors.cnnic.cn/apache/apr/apr-1.6.3.tar.gz

下载apr-util：

[root@localhost src]# wget http://mirrors.cnnic.cn/apache/apr/apr-util-1.6.1.tar.bz2

解压下载好的源码包：

[root@localhost src]# tar zxvf httpd-2.4.33.tar.gz
[root@localhost src]# tar zxvf apr-1.6.3.tar.gz 
[root@localhost src]# tar jxvf apr-util-1.6.1.tar.bz2

[root@localhost src]# cd apr-1.6.3
[root@localhost apr-1.6.3]# ./configure --prefix=/usr/local/apr
[root@localhost apr-1.6.3]# make && make install

安装apr-util（进入apr-util目录）:

[root@localhost apr-1.6.3]# cd /usr/local/src/apr-util-1.6.1
[root@localhost apr-util-1.6.1]# ./configure --prefix=/usr/local/apr-util --with-apr=/usr/local/apr
[root@localhost apr-util-1.6.1]# make && make install

如果上面在安装时出现错误，可以试着去安装expat-devel，因为apr-util需要expat-devel依赖

继续安装httpd（进入httpd目录）：

[root@localhost apr-util-1.6.1]# cd /usr/local/src/httpd-2.4.33
[root@localhost httpd-2.4.33]# ./configure \
> --prefix=/usr/local/apache2.4 \
> --with-apr=/usr/local/apr \
> --with-apr-util=/usr/local/apr-util \
> --enable-so \
> --enable-mods-shared=most

上面的 \ 表示转义字符，加上它可以将一行命令写成多行，更加直观
–prefix 指定安装目录
–enable-so 表示启用DSO，表示支持扩展模块，动态扩展模块，apache和php都支持以一个模块的形式存在
–enable-mods-shared=most 表示指定需要哪些动态扩展的模块，需要加载哪些呢？most就是绝大多数

为了避免在make的时候出错，我们可以提前安装pcre和pcre-devel：

[root@localhost httpd-2.4.33]# yum install -y pcre pcre-devel

最后编译和安装：

[root@localhost httpd-2.4.33]# make
[root@localhost httpd-2.4.33]# make install

上面两个步骤都可以通过echo $?来判断上一条命令是否正确执行

安装完之后，我们可以查看httpd的目录结构及modules目录下面的模块文件：

[root@localhost httpd-2.4.33]# ls /usr/local/apache2.4/
bin  build  cgi-bin  conf  error  htdocs  icons  include  logs  man  manual  modules

bin 命令放置的目录
conf 主要存放了配置文件httpd.conf，这个是最重要的配置文件，Apache的所有主要权限和功能都在这个文件中进行了详细的设置htdocs
logs 日志相关的目录
modules 模块放置的目录

查看apache加载了哪些模块，使用命令（两条命令一样）:
/usr/local/apache2.4/bin/httpd -M
/usr/local/apache2.4/bin/apachectl -M

[root@localhost httpd-2.4.33]# /usr/local/apache2.4/bin/apachectl -M
AH00558: httpd: Could not reliably determine the server's fully qualified domain name, using localhost.localdomain. Set the 'ServerName' directive globally to suppress this message
Loaded Modules:
 core_module (static)
 so_module (static)
 http_module (static)
 mpm_event_module (static)
 authn_file_module (shared)
 authn_core_module (shared)
 authz_host_module (shared)
 authz_groupfile_module (shared)
 authz_user_module (shared)
 authz_core_module (shared)
 access_compat_module (shared)
 auth_basic_module (shared)
 reqtimeout_module (shared)
 filter_module (shared)
 mime_module (shared)
 log_config_module (shared)
 env_module (shared)
 headers_module (shared)
 setenvif_module (shared)
 version_module (shared)
 unixd_module (shared)
 status_module (shared)
 autoindex_module (shared)
 dir_module (shared)
 alias_module (shared)

前面以AH0058开头的行，并不是错误，仅仅是一个警告
带有 shared 字样的，表示该模块为动态共享模块；带有 static 字样的，它表示以静态形式存在。两者区别在于，静态模块直接和主程序（/usr/local/apache2.4/bin/httpd)绑定在一起，动态模块则是一个个独立存在的文件

启动apache：

[root@localhost httpd-2.4.33]# /usr/local/apache2.4/bin/apachectl start
AH00558: httpd: Could not reliably determine the server's fully qualified domain name, using localhost.localdomain. Set the 'ServerName' directive globally to suppress this message

暂且不管提示的这段信息，我们查看httpd服务是否启动：

[root@localhost httpd-2.4.33]# ps aux |grep httpd
root      25761  0.0  0.1  70932  2240 ?        Ss   20:45   0:00 /usr/local/apache2.4/bin/httpd -k start
daemon    25762  0.3  0.2 359896  4260 ?        Sl   20:45   0:00 /usr/local/apache2.4/bin/httpd -k start
daemon    25763  0.3  0.2 359896  4248 ?        Sl   20:45   0:00 /usr/local/apache2.4/bin/httpd -k start
daemon    25768  0.3  0.2 359896  4248 ?        Sl   20:45   0:00 /usr/local/apache2.4/bin/httpd -k start
root      25849  0.0  0.0 112720   980 pts/0    S+   20:45   0:00 grep --color=auto httpd
[root@localhost httpd-2.4.33]# netstat -lntp 
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       PID/Program name    
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      910/sshd            
tcp        0      0 127.0.0.1:25            0.0.0.0:*               LISTEN      1292/master         
tcp6       0      0 :::3306                 :::*                    LISTEN      1218/mysqld         
tcp6       0      0 :::80                   :::*                    LISTEN      25761/httpd         
tcp6       0      0 :::22                   :::*                    LISTEN      910/sshd            
tcp6       0      0 ::1:25                  :::*                    LISTEN      1292/master

上面我们可以看到，httpd服务已经成功启动，正在监听80端口

11.3 安装PHP

PHP官网
前面讲到，PHP是作为Apache的一个模块存在的，而PHP的当前主流版本为5.6/7.1，所以我们两个都去安装。

安装PHP5

下载并解压php5源码包：

[root@localhost httpd-2.4.33]# cd /usr/local/src
[root@localhost src]# wget http://cn2.php.net/distributions/php-5.6.36.tar.bz2
[root@localhost src]# tar jxvf php-5.6.36.tar.bz2

然后配置编译各种参数（进入php5目录）：

[root@localhost src]# cd php-5.6.36
[root@localhost php-5.6.36]# ./configure \
> --prefix=/usr/local/php \
> --with-apxs2=/usr/local/apache2.4/bin/apxs \
> --with-config-file-path=/usr/local/php/etc \
> --with-mysql=/usr/local/mysql \
> --with-pdo-mysql=/usr/local/mysql \
> --with-mysqli=/usr/local/mysql/bin/mysql_config \
> --with-libxml-dir \
> --with-gd \
> --with-jpeg-dir \
> --with-png-dir \
> --with-freetype-dir \
> --with-iconv-dir \
> --with-zlib-dir \
> --with-bz2 \
> --with-openssl \
> --with-mcrypt \
> --enable-soap \
> --enable-gd-native-ttf \
> --enable-mbstring \
> --enable-sockets \
> --enable-exif

关于PHP的编译参数比较多，编译参数可以指定我们需要的功能模块，跟前面的httpd类似。上面的这些参数算是常用的，如果没有特殊要求，直接使用这些参数即可

另外，apxs是httpd的一个工具，因为有它才会自动把PHP模块安装到httpd的modules目录下，也就是说PHP将会以一个模块的形式和httpd结合在一起工作

在上一步编译PHP的过程中，我遇到了这些错误：
1. configure: error: xml2-config not found. Please check your libxml2 installation.
  安装所需的包然后继续编译：

configure: error: xml2-config not found. Please check your libxml2 installation.
[root@localhost php-5.6.36]# yum install -y libxml2-devel
[root@localhost php-5.6.36]# ./configure --prefix=/usr/local/php --with-apxs2=/usr/local/apache2.4/bin/apxs --with-config-file-path=/usr/local/php/etc --with-mysql=/usr/local/mysql --with-pdo-mysql=/usr/local/mysql --with-mysqli=/usr/local/mysql/bin/mysql_config --with-libxml-dir --with-gd --with-jpeg-dir --with-png-dir --with-freetype-dir --with-iconv-dir --with-zlib-dir --with-bz2 --with-openssl --with-mcrypt --enable-soap --enable-gd-native-ttf --enable-mbstring --enable-sockets --enable-exif

configure: error: Cannot find OpenSSL’s

configure: error: Cannot find OpenSSL's <evp.h>
[root@localhost php-5.6.36]# yum install -y openssl openssl-devel
[root@localhost php-5.6.36]# ./configure --prefix=/usr/local/php --with-apxs2=/usr/local/apache2.4/bin/apxs --with-config-file-path=/usr/local/php/etc --with-mysql=/usr/local/mysql --with-pdo-mysql=/usr/local/mysql --with-mysqli=/usr/local/mysql/bin/mysql_config --with-libxml-dir --with-gd --with-jpeg-dir --with-png-dir --with-freetype-dir --with-iconv-dir --with-zlib-dir --with-bz2 --with-openssl --with-mcrypt --enable-soap --enable-gd-native-ttf --enable-mbstring --enable-sockets --enable-exif

configure: error: Please reinstall the BZip2 distribution
安装所需的包然后继续编译：

configure: error: Please reinstall the BZip2 distribution
[root@localhost php-5.6.36]# yum install -y bzip2 bzip2-devel
[root@localhost php-5.6.36]# ./configure --prefix=/usr/local/php --with-apxs2=/usr/local/apache2.4/bin/apxs --with-config-file-path=/usr/local/php/etc --with-mysql=/usr/local/mysql --with-pdo-mysql=/usr/local/mysql --with-mysqli=/usr/local/mysql/bin/mysql_config --with-libxml-dir --with-gd --with-jpeg-dir --with-png-dir --with-freetype-dir --with-iconv-dir --with-zlib-dir --with-bz2 --with-openssl --with-mcrypt --enable-soap --enable-gd-native-ttf --enable-mbstring --enable-sockets --enable-exif

configure: error: jpeglib.h not found.
安装所需的包然后继续编译：

configure: error: jpeglib.h not found.
[root@localhost php-5.6.36]# yum -y install libjpeg-devel
[root@localhost php-5.6.36]# ./configure --prefix=/usr/local/php --with-apxs2=/usr/local/apache2.4/bin/apxs --with-config-file-path=/usr/local/php/etc --with-mysql=/usr/local/mysql --with-pdo-mysql=/usr/local/mysql --with-mysqli=/usr/local/mysql/bin/mysql_config --with-libxml-dir --with-gd --with-jpeg-dir --with-png-dir --with-freetype-dir --with-iconv-dir --with-zlib-dir --with-bz2 --with-openssl --with-mcrypt --enable-soap --enable-gd-native-ttf --enable-mbstring --enable-sockets --enable-exif

configure: error: png.h not found.
安装所需的包然后继续编译：

configure: error: png.h not found.
[root@localhost php-5.6.36]# yum install -y libpng libpng-devel
[root@localhost php-5.6.36]# ./configure --prefix=/usr/local/php --with-apxs2=/usr/local/apache2.4/bin/apxs --with-config-file-path=/usr/local/php/etc --with-mysql=/usr/local/mysql --with-pdo-mysql=/usr/local/mysql --with-mysqli=/usr/local/mysql/bin/mysql_config --with-libxml-dir --with-gd --with-jpeg-dir --with-png-dir --with-freetype-dir --with-iconv-dir --with-zlib-dir --with-bz2 --with-openssl --with-mcrypt --enable-soap --enable-gd-native-ttf --enable-mbstring --enable-sockets --enable-exif

configure: error: freetype-config not found.
安装所需的包然后继续编译：

configure: error: freetype-config not found.
[root@localhost php-5.6.36]# yum install -y freetype freetype-devel
[root@localhost php-5.6.36]# ./configure --prefix=/usr/local/php --with-apxs2=/usr/local/apache2.4/bin/apxs --with-config-file-path=/usr/local/php/etc --with-mysql=/usr/local/mysql --with-pdo-mysql=/usr/local/mysql --with-mysqli=/usr/local/mysql/bin/mysql_config --with-libxml-dir --with-gd --with-jpeg-dir --with-png-dir --with-freetype-dir --with-iconv-dir --with-zlib-dir --with-bz2 --with-openssl --with-mcrypt --enable-soap --enable-gd-native-ttf --enable-mbstring --enable-sockets --enable-exif

configure: error: mcrypt.h not found. Please reinstall libmcrypt.
安装所需的包然后继续编译：

configure: error: mcrypt.h not found. Please reinstall libmcrypt.
[root@localhost php-5.6.36]# yum install -y epel-release
[root@localhost php-5.6.36]# yum install -y libmcrypt-devel
[root@localhost php-5.6.36]# ./configure --prefix=/usr/local/php --with-apxs2=/usr/local/apache2.4/bin/apxs --with-config-file-path=/usr/local/php/etc --with-mysql=/usr/local/mysql --with-pdo-mysql=/usr/local/mysql --with-mysqli=/usr/local/mysql/bin/mysql_config --with-libxml-dir --with-gd --with-jpeg-dir --with-png-dir --with-freetype-dir --with-iconv-dir --with-zlib-dir --with-bz2 --with-openssl --with-mcrypt --enable-soap --enable-gd-native-ttf --enable-mbstring --enable-sockets --enable-exif

终于不再提示错误，有这样的信息：

+--------------------------------------------------------------------+
| License:                                                           |
| This software is subject to the PHP License, available in this     |
| distribution in the file LICENSE.  By continuing this installation |
| process, you are bound by the terms of this license agreement.     |
| If you do not agree with the terms of this license, you must abort |
| the installation process at this point.                            |
+--------------------------------------------------------------------+

Thank you for using PHP.

config.status: creating php5.spec
config.status: creating main/build-defs.h
config.status: creating scripts/phpize
config.status: creating scripts/man1/phpize.1
config.status: creating scripts/php-config
config.status: creating scripts/man1/php-config.1
config.status: creating sapi/cli/php.1
config.status: creating sapi/cgi/php-cgi.1
config.status: creating ext/phar/phar.1
config.status: creating ext/phar/phar.phar.1
config.status: creating main/php_config.h
config.status: executing default commands

这就说明PHP5配置编译参数完成

接下来就是编译：

[root@localhost php-5.6.36]# make

然后安装：

[root@localhost php-5.6.36]# make install

然后把配置文件放到/usr/local/php/etc/目录下改名为php.ini：

[root@localhost php-5.6.36]# cp php.ini-production /usr/local/php/etc/php.ini

查看一下PHP的目录：

[root@localhost php-5.6.36]# ls /usr/local/php/
bin  etc  include  lib  php
[root@localhost php-5.6.36]# ls /usr/local/php/bin
pear  peardev  pecl  phar  phar.phar  php  php-cgi  php-config  phpize

其中，/bin和bin/php 是PHP的核心文件

查看httpd中有没有加载PHP模块：

[root@localhost php-5.6.36]# /usr/local/apache2.4/bin/apachectl -M
Loaded Modules:
 core_module (static)
 so_module (static)
 http_module (static)
 mpm_event_module (static)
 authn_file_module (shared)
 authn_core_module (shared)
 authz_host_module (shared)
 authz_groupfile_module (shared)
 authz_user_module (shared)
 authz_core_module (shared)
 access_compat_module (shared)
 auth_basic_module (shared)
 reqtimeout_module (shared)
 filter_module (shared)
 mime_module (shared)
 log_config_module (shared)
 env_module (shared)
 headers_module (shared)
 setenvif_module (shared)
 version_module (shared)
 unixd_module (shared)
 status_module (shared)
 autoindex_module (shared)
 dir_module (shared)
 alias_module (shared)
 php5_module (shared)

可以看到已经加载PHP模块

查看PHP5加载的模块（都是静态模块）：

[root@localhost php-5.6.36]# /usr/local/php/bin/php -m
[PHP Modules]
bz2
Core
ctype
date
dom
ereg
exif
fileinfo
filter
gd
hash
iconv
json
libxml
mbstring
mcrypt
mysql
mysqli
openssl
pcre
PDO
pdo_mysql
pdo_sqlite
Phar
posix
Reflection
session
SimpleXML
soap
sockets
SPL
sqlite3
standard
tokenizer
xml
xmlreader
xmlwriter
zlib

[Zend Modules]

查看PHP的信息：

[root@localhost php-5.6.36]# /usr/local/php/bin/php -i
phpinfo()
PHP Version => 5.6.36

PHP是不需要

安装PHP7

下载并解压php7源码包：

[root@localhost ~]# cd /usr/local/src/
[root@localhost src]# wget http://cn2.php.net/distributions/php-7.1.6.tar.bz2
[root@localhost src]# tar jxvf php-7.1.6.tar.bz2

然后配置编译各种参数（进入php7目录）：

[root@localhost src]# cd php-7.1.6
[root@localhost php-7.1.6]# ./configure --prefix=/usr/local/php7 --with-apxs2=/usr/local/apache2.4/bin/apxs --with-config-file-path=/usr/local/php7/etc --with-mysql=/usr/local/mysql --with-pdo-mysql=/usr/local/mysql --with-mysqli=/usr/local/mysql/bin/mysql_config --with-libxml-dir --with-gd --with-jpeg-dir --with-png-dir --with-freetype-dir --with-iconv-dir --with-zlib-dir --with-bz2 --with-openssl --with-mcrypt --enable-soap --enable-gd-native-ttf --enable-mbstring --enable-sockets --enable-exif

和PHP5有两处不同，./configure –prefix=/usr/local/php7 –with-config-file-path=/usr/local/php7/etc
这次就会快很多，也不会有上面那么多的报错，因为缺少的包在上面安装PHP5的时候就已经安装了

+--------------------------------------------------------------------+
| License:                                                           |
| This software is subject to the PHP License, available in this     |
| distribution in the file LICENSE.  By continuing this installation |
| process, you are bound by the terms of this license agreement.     |
| If you do not agree with the terms of this license, you must abort |
| the installation process at this point.                            |
+--------------------------------------------------------------------+

Thank you for using PHP.

config.status: creating php7.spec
config.status: creating main/build-defs.h
config.status: creating scripts/phpize
config.status: creating scripts/man1/phpize.1
config.status: creating scripts/php-config
config.status: creating scripts/man1/php-config.1
config.status: creating sapi/cli/php.1
config.status: creating sapi/cgi/php-cgi.1
config.status: creating ext/phar/phar.1
config.status: creating ext/phar/phar.phar.1
config.status: creating main/php_config.h
config.status: main/php_config.h is unchanged
config.status: executing default commands
configure: WARNING: unrecognized options: --with-mysql

出现这样的提示信息，这就说明PHP7配置编译参数完成

接下来就是编译和安装：

[root@localhost php-7.1.6]# make && make install

然后把配置文件放到/usr/local/php7/etc/目录下改名为php.ini：

[root@localhost php-7.1.6]# cp php.ini-production /usr/local/php7/etc/php.ini

安装完成以后，我们可以查看：

[root@localhost php-7.1.6]# ls /usr/local/apache2.4/modules/libphp*
/usr/local/apache2.4/modules/libphp5.so  /usr/local/apache2.4/modules/libphp7.so
[root@localhost php-7.1.6]# ls /usr/local/apache2.4/modules/libphp7.so 
/usr/local/apache2.4/modules/libphp7.so
[root@localhost php-7.1.6]# du -sh !$
du -sh /usr/local/apache2.4/modules/libphp7.so
37M /usr/local/apache2.4/modules/libphp7.so

查看httpd中有没有加载PHP模块：

[root@localhost php-5.6.36]# /usr/local/apache2.4/bin/apachectl -M
Loaded Modules:
 core_module (static)
 so_module (static)
 http_module (static)
 mpm_event_module (static)
 authn_file_module (shared)
 authn_core_module (shared)
 authz_host_module (shared)
 authz_groupfile_module (shared)
 authz_user_module (shared)
 authz_core_module (shared)
 access_compat_module (shared)
 auth_basic_module (shared)
 reqtimeout_module (shared)
 filter_module (shared)
 mime_module (shared)
 log_config_module (shared)
 env_module (shared)
 headers_module (shared)
 setenvif_module (shared)
 version_module (shared)
 unixd_module (shared)
 status_module (shared)
 autoindex_module (shared)
 dir_module (shared)
 alias_module (shared)
 php5_module (shared)
 php7_module (shared）

可以看到已经加载PHP模块

查看PHP7加载的模块（都是静态模块）：

[root@localhost php-7.1.6]# /usr/local/php7/bin/php -m 
[PHP Modules]
bz2
Core
ctype
date
dom
exif
fileinfo
filter
gd
hash
iconv
json
libxml
mbstring
mcrypt
mysqli
openssl
pcre
PDO
pdo_mysql
pdo_sqlite
Phar
posix
Reflection
session
SimpleXML
soap
sockets
SPL
sqlite3
standard
tokenizer
xml
xmlreader
xmlwriter
zlib

[Zend Modules]

和PHP5基本上一致

查看PHP信息：

[root@localhost php-7.1.6]# /usr/local/php7/bin/php -i
phpinfo()
PHP Version => 7.1.6

11.4 Apache和PHP结合

httpd的主配置文件是 /usr/local/apache2.4/conf/httpd.conf，对于这个文件，我们要做4处修改：

[root@localhost src]# vim /usr/local/apache2.4/conf/httpd.conf

找到 #ServerName www.example.com:80 ，把ServerName前面的#删除，这样就不会再提示AH00558
找到 <Directory /> AllowOverride none Require all denied </Directory> ，把 denied 改为 granted ，目的是允许所有请求，如果不做修改，则访问时候会显示403错误
找到 AddType application/x-gzip .gz .tgz 这行，在该行下面添加一行：AddType application/x-httpd-php .php，这里需要注意php和.php之间有空格
找到 <IfModule dir_module> DirectoryIndex index.html </IfModule> 这行，并将该行修改为：<IfModule dir_module> DirectoryIndex index.html index.php </IfModule>
配置完成，保存退出

可以测试一下配置语法是否正确：

[root@localhost src]# /usr/local/apache2.4/bin/apachectl -t 
Syntax OK

说明配置语法没问题

然后重新加载配置文件：

[root@localhost src]# /usr/local/apache2.4/bin/apachectl graceful

启动服务：

[root@localhost src]# /usr/local/apache2.4/bin/apachectl start

查看是否启动：

[root@localhost src]# netstat -lntp |grep 80
tcp6       0      0 :::80                   :::*                    LISTEN      5412/httpd

已经成功启动httpd

另外，还可以使用curl命令测试一下：

[root@localhost src]# curl localhost
<html><body><h1>It works!</h1></body></html>

测试成功

最后，我们还需要测试是否正确解析PHP：

[root@localhost src]# vim /usr/local/apache2.4/htdocs/1.php
<?php
 echo "php解析正常";
?>
[root@localhost php-5.6.36]# curl localhost/1.php
php解析正常[root@localhost php-5.6.36]#

说明PHP解析正确

另外，如果是利用真实Windows机器来访问Linux（虚拟）机器，需要在Linux机器上打开80端口：

[root@localhost php-5.6.36]# iptables -I INPUT -p tcp --dport 80 -j ACCEPT

然后用浏览器访问linux机器的IP地址：
这里写图片描述

更多资料参考：
mysql5.5源码编译安装
 apache工作模式
 php编译参数详解析
 查看编译参数