Robot in Basement

版权声明:本文为博主原创文章,未经博主允许不得转载。 https://blog.csdn.net/jnxxhzz/article/details/80957430

2176: Robot in Basement

Time Limit: 2 Sec   Memory Limit: 256 MB
Submit: 9   Solved: 5
[ Submit][ Status][ Web Board]

Description

time limit per test
4 seconds
memory limit per test
256 megabytes
input
standard input
output
standard output

The Professor has lost his home robot yet again. After some thinking Professor understood that he had left the robot in the basement.

The basement in Professor's house is represented by a rectangle n×m, split into 1×1 squares. Some squares are walls which are impassable; other squares are passable. You can get from any passable square to any other passable square moving through edge-adjacent passable squares. One passable square is the exit from the basement. The robot is placed exactly in one passable square. Also the robot may be placed in the exit square.

Professor is scared of going to the dark basement looking for the robot at night. However, he has a basement plan and the robot's remote control. Using the remote, Professor can send signals to the robot to shift one square left, right, up or down. When the robot receives a signal, it moves in the required direction if the robot's neighboring square in the given direction is passable. Otherwise, the robot stays idle.

Professor wrote a sequence of k commands on a piece of paper. He thinks that the sequence can lead the robot out of the basement, wherever it's initial position might be. Professor programmed another robot to press the required buttons on the remote according to the notes on the piece of paper. Professor was just about to run the program and go to bed, when he had an epiphany.

Executing each command takes some energy and Professor doesn't want to get huge electricity bill at the end of the month. That's why he wants to find in the sequence he has written out the minimal possible prefix that would guarantee to lead the robot out to the exit after the prefix is fulfilled. And that's the problem Professor challenges you with at this late hour.

Input

The first line contains three integers nm and k (3≤n,m≤1501≤k≤105). Next n lines contain m characters each − that is the Professor's basement's description: "#" stands for a wall, "." stands for a passable square and "E" stands for the exit from the basement (this square also is passable). It is possible to get from each passable square to the exit, all squares located by the n×m rectangle's perimeter are the walls. Exactly one square is the exit from the basement. The last line contains k characters, the description of the sequence of commands that Professor has written out on a piece of paper. "L", "R", "U", "D" stand for commands left, right, up and down correspondingly.

Output

Print in the output file the length of the smallest possible prefix that will lead the robot to the exit square. In other words, wherever the robot had been positioned initially, it should be positioned in the exit square after all the commands from the prefix are fulfilled (during doing commands the robot can come and leave the exit square, but only the last position of the robot is interesting for us). If Professor is mistaken and no prefix (including the whole sequence) can bring the robot to the exit, print "-1" (without the quotes). If there is the only passable square and it is the exit, print "0" (without the quotes).

Examples
Input
5 5 7
#####
#...#
#...#
#E..#
#####
UULLDDR

Output
6
Input
5 5 7
#####
#.#.#
#...#
#E..#
#####
UULLDDR
Output
-1
Input
5 3 2
###
#.#
#.#
#E#
###
DD
Output
2

【分析】

模拟....因为并不需要知道一个点有几个机器人,只要知道这个点有没有机器人就可以了....暴力模拟肯定t了

用bitset模拟就可以了...

【代码】

#include <cstdio>
#include <cstring>
#include <algorithm>
#include <bitset>
using namespace std;
char s[100005];
int n, m, k;
int work(){
    bitset<23000> a, b, c, e;
    for(int i = 0; i < n; i++)
    {
        scanf("%s", s);
        for(int j = 0; j < m; j++)
        {
            (s[j]=='#'?b:a).set(i*m+j);
            (s[j]=='E'?e.set(i*m+j):0);
        }
    }
    scanf("%s", s);
    c = a;
    for(int i = 0; i < k; i++)
    {
        if(c==e)return i;
        if(s[i]=='U') c = ((c>>m)&a) | (c&(b<<m));
        if(s[i]=='L') c = ((c>>1)&a) | (c&(b<<1));
        if(s[i]=='D') c = ((c<<m)&a) | (c&(b>>m));
        if(s[i]=='R') c = ((c<<1)&a) | (c&(b>>1));
    }
    if(c==e)return k;
    return -1;
}
int main(){
    int i, j;
    while (~scanf("%d %d %d", &n, &m, &k)){
        printf("%d\n", work());
    }
    return 0;
}

猜你喜欢

转载自blog.csdn.net/jnxxhzz/article/details/80957430