####linux系统中的磁盘管理####
-
本地存储设备的识别
fdisk -l ##真实存在的设备
cat /proc/partitions ##系统识别的设备
blkid ##系统可以使用的设备
df ##系统正在挂载的设备 -
设备的挂载和卸载
设备名称
/dev/xdx ##/dev/hd0 /dev/hd1 /dev/sda /dev/sdb /dev/sda1 /dev/sdb1
/dev/sr0 ##光驱
/dev/mapper/* ##虚拟设备（用软件模拟出来的）
设备的挂载
mount 设备 挂载点
mount /dev/sdb1 /mnt ##挂载sdb1到mnt
umount /mnt或sdb1 ##卸载
mount -o ro /dev/sdb1 /mnt ##只读挂载
mount ##查看挂载信息
mount -o remount,rw /dev/sdb1或 /mnt ##重新读写挂载 -
解决设备正忙问题
[root@foundation62 ~]# umount /mnt
umount: /mnt: target is busy.
(In some cases useful info about processes that use
the device is found by lsof(8) or fuser(1))
解决方法1：lsof /mnt
[root@foundation62 ~]# lsof /mnt
lsof: WARNING: can’t stat() fuse.gvfsd-fuse file system /run/user/1000/gvfs
Output information may be incomplete.
COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
bash 12849 root cwd DIR 8,17 8192 1 /mnt
kill -9 12849
umount /mnt
解决方法2：
fuser -vm /mnt ##查看
fuser -kvm /mnt ##查看并结束
磁盘分区
1.fdisk -l
2.fdisk /dev/vdb
Command (m for help): m
Command action
a toggle a bootable flag
b edit bsd disklabel
c toggle the dos compatibility flag
d delete a partition
g create a new empty GPT partition table
G create an IRIX (SGI) partition table
l list known partition types
m print this menu
n add a new partition
o create a new empty DOS partition table
p print the partition table
q quit without saving changes
s create a new empty Sun disklabel
t change a partition’s system id
u change display/entry units
v verify the partition table
w write table to disk and exit
x extra functionality (experts only)
Command (m for help): n
Partition type:
p primary (0 primary, 0 extended, 4 free)
e extended
Select (default p): ##主分区
Using default response p
Partition number (1-4, default 1): ##id用默认
First sector (2048-20971519, default 2048): ##分区起始
Using default value 2048
Last sector, +sectors or +size{K,M,G} (2048-20971519, default 20971519): +500M ##分区大小
Partition 1 of type Linux and of size 500 MiB is set
Command (m for help): p ##显示信息
Disk /dev/vdb: 10.7 GB, 10737418240 bytes, 20971520 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0xc3a0e4b3
Device Boot Start End Blocks Id System
/dev/vdb1 2048 1026047 512000 83 Linux
/dev/vdb2 1026048 2050047 512000 83 Linux
/dev/vdb3 2050048 3074047 512000 83 Linux
/dev/vdb4 3074048 20971519 8948736 5 Extended ##把所有剩余空间都给扩展分区
4.给设备安装文件系统
cat /proc/partitions
mkfs.xfs /dev/vdb1
vim /etc/fstab
设备 挂载点 文件系统 挂载参数 是否备份 是否检测
/dev/vdb1 /mnt xfs defaults 0 0
mount -a
5.swap分区管理
(1)swap分区建立
划分分区并设定分区标签为82
mkswap /dev/vdb6
swapon -a /dev/vdb6
swapon -s
Filename Type Size Userd Priority
/dev/vdb6 partition 511996 0 -1
vim /etc/fstab
/dev/vdb6 swap swap defaults 0 0
(2)swap分区删除
vim /etc/fstab
swapoff /dev/vdb6
swapon -s
####6.配额####
1.分区，格式化
mkdir /public
mount -o usrquota /dev/vdb7 /public
edquota -u student
vim /etc/fstab
加入：
/dev/vdb /public xfs defaults,usrquota 0 0
测试：
[student@server ~]$ dd if=/dev/zero of=/public/studentfile bs=1M count=500
####7.磁盘加密####
cryptsetup luckFormat /dev/vbd8
YES
cryptsetup open /dev/vdb8 westos
mkfs.xfs /dev/mapper/westos
mount /dev/mapper/westos /mnt/
touch /mun/file{1…10}
umount /mnt/
cryptsetup close westos ##关闭之后，/dev/mapper/westos文件消失，挂载原始设备也不能查看其中的内容
cryptsetup open /dev/vdb8 linux
mount /dev/mapper/linux /mnt