版权声明：本文为GJHe原创文章，未经博主允许不得转载。 https://blog.csdn.net/qq_35428201/article/details/82591813
实验拓扑
实验要求
某公司企业网
要求：
1，通过MUX vlan搭建企业网
主vlan 40
隔离型从vlan 30
互通型从vlan 10 20
2，为增加交换机之间链路带宽配置静态lacp链路聚合
3，交换机1和交换机2之间链路聚合设置活跃数为2
设置为抢占模式，抢占延时10秒
VLAN配置(自己规划，图中是我规划的)
LSW1
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]un in en
Info: Information center is disabled.
[Huawei]sys LSW1
[LSW1]vlan batch 10 20 30 40
Info: This operation may take a few seconds. Please wait for a moment...done.
[LSW1]vlan 40
[LSW1-vlan40]mux-vlan
[LSW1-vlan40]subordinate separate 30
[LSW1-vlan40]subordinate group 10 20LSW2
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]un in en
Info: Information center is disabled.
[Huawei]sys LSW2
[LSW2]vlan batch 10 20 30 40
Info: This operation may take a few seconds. Please wait for a moment...done.
[LSW2]vlan 40
[LSW2-vlan40]mux-vlan
[LSW2-vlan40]subordinate separate 30
[LSW2-vlan40]subordinate group 10 20
[LSW2-vlan40]quLSW3
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]un in en
Info: Information center is disabled.
[Huawei]sys LSW3
[LSW3]vlan batch 10 20 30 40
Info: This operation may take a few seconds. Please wait for a moment...done.
[LSW3]vlan 40
[LSW3-vlan40]mux-vlan
[LSW3-vlan40]subordinate separate 30
[LSW3-vlan40]subordinate group 10 20
[LSW3-vlan40]qu划分vlan
LSW1
[LSW1]inter e0/0/1
[LSW1-Ethernet0/0/1]port link-type access
[LSW1-Ethernet0/0/1]port default vlan 10
[LSW1-Ethernet0/0/1]inter e0/0/2
[LSW1-Ethernet0/0/2]port link-type access
[LSW1-Ethernet0/0/2]port default vlan 10
[LSW1-Ethernet0/0/2]inter e0/0/3
[LSW1-Ethernet0/0/3]port link-type access
[LSW1-Ethernet0/0/3]port default vlan 20
[LSW1-Ethernet0/0/3]inter e0/0/4
[LSW1-Ethernet0/0/4]port link-type access
[LSW1-Ethernet0/0/4]port default vlan 20
[LSW1-Ethernet0/0/4]quLSW2
[LSW2]inter g0/0/2
[LSW2-GigabitEthernet0/0/2]port link-type access
[LSW2-GigabitEthernet0/0/2]port default vlan 40
[LSW2-GigabitEthernet0/0/2]inter g0/0/1
[LSW2-GigabitEthernet0/0/1]port link-type access
[LSW2-GigabitEthernet0/0/1]port default vlan 40
[LSW2-GigabitEthernet0/0/1]quLSW3
[LSW3]inter e0/0/1
[LSW3-Ethernet0/0/1]port link-type access
[LSW3-Ethernet0/0/1]port default vlan 30
[LSW3-Ethernet0/0/1]inter e0/0/2
[LSW3-Ethernet0/0/2]port link-type access
[LSW3-Ethernet0/0/2]port default vlan 30AR1
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]un in en
Info: Information center is disabled.
[Huawei]sys AR1
[AR1]inter g0/0/0
[AR1-GigabitEthernet0/0/0]ip add 192.168.1.200 24开启MUX vlan
LSW1
[LSW1]interface Ethernet0/0/1
[LSW1-Ethernet0/0/1]port mux-vlan enable
[LSW1-Ethernet0/0/1]interface Ethernet0/0/2
[LSW1-Ethernet0/0/2]port mux-vlan enable
[LSW1-Ethernet0/0/2]interface Ethernet0/0/3
[LSW1-Ethernet0/0/3]port mux-vlan enable
[LSW1-Ethernet0/0/3]interface Ethernet0/0/4
[LSW1-Ethernet0/0/4]port mux-vlan enable
[LSW1-Ethernet0/0/4]qLSW2
[LSW2]inte g0/0/1
[LSW2-GigabitEthernet0/0/1]port mux-vlan enable
[LSW2-GigabitEthernet0/0/1]inte g0/0/2
[LSW2-GigabitEthernet0/0/2]port mux-vlan enable
[LSW2-GigabitEthernet0/0/2]quLSW3
[LSW3]inter e0/0/1
[LSW3-Ethernet0/0/1]port mux-vlan enable
[LSW3-Ethernet0/0/1]inter e0/0/2
[LSW3-Ethernet0/0/2]port mux-vlan enable
[LSW3-Ethernet0/0/2]quit配置LACP
LSW1
[LSW1]interface Eth-Trunk 1
[LSW1-Eth-Trunk1]mode lacp-static
[LSW1-Eth-Trunk1]max active-linknumber 2
[LSW1-Eth-Trunk1]lacp preempt delay 10
[LSW1-Eth-Trunk1]quit
[LSW1]interface Ethernet0/0/5
[LSW1-Ethernet0/0/5]eth-trunk 1
Info: This operation may take a few seconds. Please wait for a moment...done.
[LSW1-Ethernet0/0/5]interface Ethernet0/0/10
[LSW1-Ethernet0/0/10]eth-trunk 1
Info: This operation may take a few seconds. Please wait for a moment...done.
[LSW1-Ethernet0/0/10]interface Ethernet0/0/15
[LSW1-Ethernet0/0/15]eth-trunk 1
Info: This operation may take a few seconds. Please wait for a moment...done.
[LSW1-Ethernet0/0/15]quitLSW2
[LSW2]interface eth-trunk 1
[LSW2-Eth-Trunk1]mode lacp-static
[LSW2-Eth-Trunk1]max active-linknumber 2
[LSW2-Eth-Trunk1]lacp preempt delay 10
[LSW2-Eth-Trunk1]q
[LSW2]inter g0/0/5
[LSW2-GigabitEthernet0/0/5]eth-trunk 1
Info: This operation may take a few seconds. Please wait for a moment...done.
[LSW2-GigabitEthernet0/0/5]inter g0/0/10
[LSW2-GigabitEthernet0/0/10]eth-trunk 1
Info: This operation may take a few seconds. Please wait for a moment...done.
[LSW2-GigabitEthernet0/0/10]inter g0/0/15
[LSW2-GigabitEthernet0/0/15]eth-trunk 1
Info: This operation may take a few seconds. Please wait for a moment...done.
[LSW2-GigabitEthernet0/0/15]quit
[LSW2]interface eth-trunk 2
[LSW2-Eth-Trunk2]mode lacp-static
[LSW2-Eth-Trunk2]lacp preempt delay 10
[LSW2-Eth-Trunk2]quit
[LSW2]inter g0/0/3
[LSW2-GigabitEthernet0/0/3]eth-trunk 2
Info: This operation may take a few seconds. Please wait for a moment...done.
[LSW2-GigabitEthernet0/0/3]inter g0/0/6
[LSW2-GigabitEthernet0/0/6]eth-trunk 2
Info: This operation may take a few seconds. Please wait for a moment...done.
[LSW2-GigabitEthernet0/0/6]quitLSW3
[LSW3]inter eth-tr 2
[LSW3-Eth-Trunk2]mode lacp-static
[LSW3-Eth-Trunk2]lacp preempt delay 10
[LSW3-Eth-Trunk2]qui
[LSW3]inter e0/0/3
[LSW3-Ethernet0/0/3]eth-trunk 2
Info: This operation may take a few seconds. Please wait for a moment...done.
[LSW3-Ethernet0/0/3]inter e0/0/6
[LSW3-Ethernet0/0/6]eth-trunk 2
Info: This operation may take a few seconds. Please wait for a moment...done.
[LSW3-Ethernet0/0/6]quit配置trunk
LSW1
[LSW1]interface Eth-Trunk 1
[LSW1-Eth-Trunk1]port link-type trunk
[LSW1-Eth-Trunk1]port trunk allow-pass vlan 10 20 30 40
[LSW1-Eth-Trunk1]quitLSW2
[LSW2]interface Eth-Trunk 1
[LSW2-Eth-Trunk1]port link-type trunk
[LSW2-Eth-Trunk1]port trunk allow-pass vlan 10 20 30 40
[LSW2-Eth-Trunk1]interface Eth-Trunk 2
[LSW2-Eth-Trunk2]port link-type trunk
[LSW2-Eth-Trunk2]port trunk allow-pass vlan 10 20 30 40
[LSW2-Eth-Trunk2]quitLSW3
[LSW3]interface Eth-Trunk 2
[LSW3-Eth-Trunk2]port link-type trunk
[LSW3-Eth-Trunk2]port trunk allow-pass vlan 10 20 30 40
[LSW3-Eth-Trunk2]quit
