0）系统环境
CentOS 7.4 IP: 192.168.100.10 [root@jumpserver-server ~]# cat /etc/redhat-release CentOS Linux release 7.4.1708 (Core) 关闭防火墙和selinux [root@jumpserver-server ~]# systemctl stop firewalld.service [root@jumpserver-server ~]# systemctl disable firewalld.service [root@jumpserver-server ~]# setenforce 0 [root@jumpserver-server ~]# getenforce [root@jumpserver-server ~]# cat /etc/sysconfig/selinux ........ SELINUX=disabled 修改字符集，否则可能报 input/output error的问题，因为日志里打印了中文 [root@jumpserver-server ~]# localedef -c -f UTF-8 -i zh_CN zh_CN.UTF-8 [root@jumpserver-server ~]# export LC_ALL=zh_CN.UTF-8 [root@jumpserver-server ~]# echo 'LANG=zh_CN.UTF-8' > /etc/sysconfig/i18n
1）准备Python3和Python虚拟环境
1.1）安装依赖包 [root@jumpserver-server ~]# yum -y install wget libselinux-python sqlite-devel xz gcc automake zlib-devel openssl-devel epel-release git 1.2）编译安装（这里必须执行编译安装，否则在安装 Python 库依赖时会有麻烦） [root@jumpserver-server ~]# cd /usr/local/src/ [root@jumpserver-server src]# wget https://www.python.org/ftp/python/3.6.1/Python-3.6.1.tar.xz [root@jumpserver-server src]# tar xvf Python-3.6.1.tar.xz [root@jumpserver-server src]# cd Python-3.6.1 [root@jumpserver-server Python-3.6.1]# ./configure && make && make install 1.3）建立Python虚拟环境 因为CentOS 6/7自带的是Python2，而Yum等工具依赖原来的Python，为了不扰乱原来的环境我们来使用Python虚拟环境 [root@jumpserver-server ~]# cd /opt/ [root@jumpserver-server opt]# python3 -m venv py3 [root@jumpserver-server opt]# source /opt/py3/bin/activate (py3) [root@jumpserver-server opt]# 看到上面的提示符代表成功，以后运行Jumpserver都要先运行以上source命令，以下所有命令均在该虚拟环境中运行！
2）安装Jumpserver 1.0.0
2.1）下载或clone项目
除了在github上下载外，还可以到百度云盘上下载：https://pan.baidu.com/s/1BVYRF7M-akKjUOoYZPBi7Q （提取密码：v5rs）
(py3) [root@jumpserver-server ~]# cd /opt/
(py3) [root@jumpserver-server opt]# git clone https://github.com/jumpserver/jumpserver.git
2.2）安装依赖rpm包
(py3) [root@jumpserver-server opt]# cd /opt/
(py3) [root@jumpserver-server opt]# cd jumpserver/requirements
(py3) [root@jumpserver-server requirements]# yum -y install epel-release
(py3) [root@jumpserver-server requirements]# yum -y install $(cat rpm_requirements.txt) //如果没有任何报错请继续
2.3）安装python库依赖
(py3) [root@jumpserver-server requirements]# pip install -r requirements.txt //如果没有任何报错请继续
2.4）安装Redis, Jumpserver 使用 Redis 做 cache 和 celery broke
(py3) [root@jumpserver-server requirements]# yum -y install redis
(py3) [root@jumpserver-server requirements]# systemctl start redis
(py3) [root@jumpserver-server requirements]# lsof -i:6379
COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
redis-ser 11281 redis 4u IPv4 90233 0t0 TCP localhost:6379 (LISTEN)
2.5）安装MySQL
(py3) [root@jumpserver-server requirements]# yum -y install mariadb mariadb-devel mariadb-server
(py3) [root@jumpserver-server requirements]# systemctl enable mariadb
(py3) [root@jumpserver-server requirements]# systemctl start mariadb
(py3) [root@jumpserver-server requirements]# systemctl status mariadb
(py3) [root@jumpserver-server requirements]# lsof -i:3306
设置mysql密码，比如密码设置为123456
(py3) [root@jumpserver-server requirements]# mysql_secure_installation
......
Set root password? [Y/n] y
New password: //比如密码是123456
Re-enter new password:
...... //其他项全部回车默认
创建数据库Jumpserver并授权
(py3) [root@jumpserver-server requirements]# mysql -p123456
MariaDB [(none)]> create database jumpserver default charset 'utf8';
MariaDB [(none)]> grant all on jumpserver.* to 'jumpserver'@'127.0.0.1' identified by 'jumpserver@123';
MariaDB [(none)]> flush privileges;
MariaDB [(none)]> show databases;
+--------------------+
| Database |
+--------------------+
| information_schema |
| jumpserver |
| mysql |
| performance_schema |
| test |
+--------------------+
2.6）安装 python3 mysql驱动: mysqlclient
由于MySQLdb库不支持 python3.5+，所以选择了mysqlclient作为驱动,pymysql使用python写的，速度较慢
(py3) [root@jumpserver-server requirements]# pip install mysqlclient
2.7）修改jumpserver配置文件
计划修改 DevelopmentConfig中的配置，因为默认jumpserver是使用该配置，它继承自Config。
(py3) [root@jumpserver-server opt]# cd /opt/jumpserver
(py3) [root@jumpserver-server jumpserver]# cp config_example.py config.py
(py3) [root@jumpserver-server jumpserver]# vim config.py
.....
class ProductionConfig(Config):
pass
class DevelopmentConfig(Config): //从这一行开始添加
DEBUG = True
DISPLAY_PER_PAGE = 20
DB_ENGINE = 'mysql'
DB_HOST = '127.0.0.1'
DB_PORT = 3306
DB_USER = 'jumpserver'
DB_PASSWORD = 'jumpserver@123'
DB_NAME = 'jumpserver'
EMAIL_HOST = 'smtp.163.com'
EMAIL_PORT = 465
EMAIL_HOST_USER = '[email protected]'
EMAIL_HOST_PASSWORD = 'pwd'
EMAIL_USE_SSL = True
EMAIL_USE_TLS = False
EMAIL_SUBJECT_PREFIX = '[Jumpserver] '
SITE_URL = 'http://192.168.100.10:8080' //一直添加到这一行
# Default using Config settings, you can write if/else for different env
config = DevelopmentConfig()
2.8）生成数据库表结构和初始化数据
(py3) [root@jumpserver-server jumpserver]# cd /opt/jumpserver/utils
(py3) [root@jumpserver-server utils]# ls
clean_migrations.sh export_fake_data.sh load_fake_data.sh make_migrations.sh redis.conf
(py3) [root@jumpserver-server utils]# bash make_migrations.sh
.....
"""
jumpserver.config
~~~~~~~~~~~~~~~~~
Jumpserver project setting file
........
Applying django_celery_beat.0002_auto_20161118_0346... OK
Applying django_celery_beat.0003_auto_20161209_0049... OK
Applying django_celery_beat.0004_auto_20170221_0000... OK
Applying terminal.0002_auto_20180318_2330... OK
出现如上信息，即表示操作成功！
2.9）运行Jumpserver
(py3) [root@jumpserver-server utils]# cd /opt/jumpserver
(py3) [root@jumpserver-server jumpserver]# python run_server.py & //按键ctrl+c结束
(py3) [root@jumpserver-server jumpserver]# lsof -i:8080
COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
gunicorn 17338 root 5u IPv4 204937 0t0 TCP *:webcache (LISTEN)
gunicorn 28888 root 5u IPv4 204937 0t0 TCP *:webcache (LISTEN)
gunicorn 28890 root 5u IPv4 204937 0t0 TCP *:webcache (LISTEN)
gunicorn 28894 root 5u IPv4 204937 0t0 TCP *:webcache (LISTEN)
gunicorn 28896 root 5u IPv4 204937 0t0 TCP *:webcache (LISTEN)
运行不报错，请浏览器访问 http://192.168.100.10:8080/ 账号: admin 密码: admin
