orderer集群多机部署

其他 2018-06-07 05:08:19 阅读次数: 2

0、说明：

orderer节点的部署方式有两种：solo和kafka。单机很简单，这次重点记录kafka（分布式队列）的部署方式

首先规划好机器节点容器配置。

orderer： 3台
zookeeper： 3、5、7，此处简单设置，我们启动3台
kafka： 4台最好，4台情况下可允许一台宕机（本次示例中，kafka配置了3台，机器不够，权当第四台宕机了。。。）

首先必须明确启动顺序，辅助容器先起。

所以启动顺序是：zookeeper、kafka、orderer、peer

1、生成网络配置以及证书文件

修改网络配置文件configtx.yaml（该配置文件中只需修改orderer相关的配置就行）

Orderer: &OrdererDefaults

    # Orderer Type: The orderer implementation to start
    # Available types are "solo" and "kafka"
    OrdererType: kafka

    Addresses:
        - orderer0.example.com:7050
        - orderer1.example.com:7050
        - orderer2.example.com:7050

    # Batch Timeout: The amount of time to wait before creating a batch
    BatchTimeout: 2s

    # Batch Size: Controls the number of messages batched into a block
    BatchSize:

        # Max Message Count: The maximum number of messages to permit in a batch
        MaxMessageCount: 10

        # Absolute Max Bytes: The absolute maximum number of bytes allowed for
        # the serialized messages in a batch.
        AbsoluteMaxBytes: 98 MB

        # Preferred Max Bytes: The preferred maximum number of bytes allowed for
        # the serialized messages in a batch. A message larger than the preferred
        # max bytes will result in a batch larger than preferred max bytes.
        PreferredMaxBytes: 1024 KB

    Kafka:
        # Brokers: A list of Kafka brokers to which the orderer connects. Edit
        # this list to identify the brokers of the ordering service.
        # NOTE: Use IP:port notation.
        Brokers:
            - 192.168.3.231:9092
            - 192.168.3.231:10092
            - 192.168.3.232:9092
            - 192.168.3.233:9092

    # Organizations is the list of orgs which are defined as participants on
    # the orderer side of the network
    Organizations:

修改crypto-config.yaml，生成各个orderer的相关证书（同样也是修改orderer相关配置）

OrdererOrgs:
  # ---------------------------------------------------------------------------
  # Orderer
  # ---------------------------------------------------------------------------
  - Name: Orderer
    Domain: example.com
    CA:
        Country: US
        Province: California
        Locality: San Francisco
    # ---------------------------------------------------------------------------
    # "Specs" - See PeerOrgs below for complete description
    # ---------------------------------------------------------------------------
    Specs:
      - Hostname: orderer0
      - Hostname: orderer1
      - Hostname: orderer2

使用generate脚本自动生成相关配置

./generateArtifacts.sh mychannel

2、编写zookeeper、kafka、orderer、peer等相关节点配置文件

此处只给出示例，详细配置不解释。

docker-compose-zookeeper.yaml：

version: '2'

services:
  zookeeper1:
    container_name: zookeeper1
    hostname: zookeeper1
    image: hyperledger/fabric-zookeeper
    restart: always
    environment:
      - ZOO_MY_ID=1
      - ZOO_SERVERS=server.1=zookeeper1:2888:3888 server.2=zookeeper2:2888:3888 server.3=zookeeper3:2888:3888 quorumListenOnAllIPs=true
    ports:
      - "2181:2181"
      - "2888:2888"
      - "3888:3888"
    extra_hosts:
      - "zookeeper1:192.168.3.231"
      - "zookeeper2:192.168.3.232"
      - "zookeeper3:192.168.3.233"
      - "kafka1:192.168.3.231"
      - "kafka2:192.168.3.231"
      - "kafka3:192.168.3.232"
      - "kafka4:192.168.3.233"

docker-compose-kafka.yaml：

version: '2'

services:

  kafka1:
    container_name: kafka1
    hostname: kafka1
    image: hyperledger/fabric-kafka
    restart: always
    environment:
      - KAFKA_BROKER_ID=1
      - KAFKA_MIN_INSYNC_REPLICAS=2
      - KAFKA_DEFAULT_REPLICATION_FACTOR=3
      - KAFKA_ZOOKEEPER_CONNECT=zookeeper1:2181,zookeeper2:2181,zookeeper3:2181
      - KAFKA_UNCLEAN_LEADER_ELECTION_ENABLE=false
    ports:
      - "9092:9092"
    extra_hosts:
      - "zookeeper1:192.168.3.231"
      - "zookeeper2:192.168.3.232"
      - "zookeeper3:192.168.3.233"
      - "kafka1:192.168.3.231"
      - "kafka2:192.168.3.232"
      - "kafka3:192.168.3.233"

docker-compose-orderer.yaml：

version: '2'

services:

orderer0.example.com:
    container_name: orderer0.example.com
    image: hyperledger/fabric-orderer
    environment:
      - CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=e2e_cli_default
      - ORDERER_GENERAL_LOGLEVEL=debug
      - ORDERER_GENERAL_LISTENADDRESS=0.0.0.0
      - ORDERER_GENERAL_LISTENPORT=7050
      - ORDERER_GENERAL_GENESISMETHOD=file
      - ORDERER_GENERAL_GENESISFILE=/var/hyperledger/orderer/orderer.genesis.block
      - ORDERER_GENERAL_LOCALMSPID=OrdererMSP
      - ORDERER_GENERAL_LOCALMSPDIR=/var/hyperledger/orderer/msp
      # enabled TLS
      - ORDERER_GENERAL_TLS_ENABLED=true
      - ORDERER_GENERAL_TLS_PRIVATEKEY=/var/hyperledger/orderer/tls/server.key
      - ORDERER_GENERAL_TLS_CERTIFICATE=/var/hyperledger/orderer/tls/server.crt
      - ORDERER_GENERAL_TLS_ROOTCAS=[/var/hyperledger/orderer/tls/ca.crt]

      - ORDERER_KAFKA_RETRY_LONGINTERVAL=10s
      - ORDERER_KAFKA_RETRY_LONGTOTAL=100s
      - ORDERER_KAFKA_RETRY_SHORTINTERVAL=1s
      - ORDERER_KAFKA_RETRY_SHORTTOTAL=30s
      - ORDERER_KAFKA_VERBOSE=true
      - ORDERER_KAFKA_BROKERS=[192.168.3.231:9092,192.168.3.231:10092,192.168.3.232:9092,192.168.3.233:9092]
    working_dir: /opt/gopath/src/github.com/hyperledger/fabric
    command: orderer
    volumes:
      - ./channel-artifacts/genesis.block:/var/hyperledger/orderer/orderer.genesis.block
      - ./crypto-config/ordererOrganizations/example.com/orderers/orderer0.example.com/msp:/var/hyperledger/orderer/msp
      - ./crypto-config/ordererOrganizations/example.com/orderers/orderer0.example.com/tls/:/var/hyperledger/orderer/tls
    ports:
      - 7050:7050
    extra_hosts:
      - "kafka1:192.168.3.231"
      - "kafka2:192.168.3.232"
      - "kafka3:192.168.3.233"

docker-compose-peer.yaml：

version: '2'

services:
  ca0:
    image: hyperledger/fabric-ca
    environment:
      - FABRIC_CA_HOME=/etc/hyperledger/fabric-ca-server
      - FABRIC_CA_SERVER_CA_NAME=ca-org1
      - FABRIC_CA_SERVER_TLS_ENABLED=true
      - FABRIC_CA_SERVER_TLS_CERTFILE=/etc/hyperledger/fabric-ca-server-config/ca.org1.example.com-cert.pem
      - FABRIC_CA_SERVER_TLS_KEYFILE=/etc/hyperledger/fabric-ca-server-config/b8db7518d78a9e26d1441fd63268c9d7cac7ccc23cedf9ec78c9676699b85d5c_sk
    ports:
      - "7054:7054"
    command: sh -c 'fabric-ca-server start --ca.certfile /etc/hyperledger/fabric-ca-server-config/ca.org1.example.com-cert.pem --ca.keyfile /etc/hyperledger/fabric-ca-server-config/b8db7518d78a9e26d1441fd63268c9d7cac7ccc23cedf9ec78c9676699b85d5c_sk -b admin:adminpw -d'
    volumes:
      - ./crypto-config/peerOrganizations/org1.example.com/ca/:/etc/hyperledger/fabric-ca-server-config
    container_name: ca_peerOrg1

peer0.org1.example.com:
    container_name: peer0.org1.example.com
    extends:
      file:  base/peer-base.yaml
      service: peer-base
    environment:
      - CORE_PEER_ID=peer0.org1.example.com
      - CORE_PEER_ADDRESS=peer0.org1.example.com:7051
      - CORE_PEER_CHAINCODEADDRESS=peer0.org1.example.com:7052
      - CORE_PEER_CHAINCODELISTENADDRESS=0.0.0.0:7052
      - CORE_PEER_GOSSIP_EXTERNALENDPOINT=peer0.org1.example.com:7051
      - CORE_PEER_LOCALMSPID=Org1MSP
    volumes:
      - /var/run/:/host/var/run/
      - ./crypto-config/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/msp:/etc/hyperledger/fabric/msp
      - ./crypto-config/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls:/etc/hyperledger/fabric/tls
    ports:
      - 7051:7051
      - 7052:7052
      - 7053:7053
    # 此处添加其它节点的域名和ip绑定（貌似只要配置启动网络的机器，后续的不需要）
    # 此处如果不加，peer日志会联系不上其它节点（鬼知道为什么。。
    # 网传kafka集群模式下，这个属性没有用，所以建议本地hosts文件一起配上（我就是这么搞的））
    extra_hosts:
      - "peer1.org1.example.com:IP"
      - "peer0.org2.example.com:IP"
      - "peer1.org2.example.com:IP"

peer1.org1.example.com:
    container_name: peer1.org1.example.com
    extends:
      file:  base/peer-base.yaml
      service: peer-base
    environment:
      - CORE_PEER_ID=peer1.org1.example.com
      - CORE_PEER_ADDRESS=peer1.org1.example.com:7051
      - CORE_PEER_CHAINCODEADDRESS=peer1.org1.example.com:7052
      - CORE_PEER_CHAINCODELISTENADDRESS=0.0.0.0:7052
      - CORE_PEER_GOSSIP_EXTERNALENDPOINT=peer1.org1.example.com:7051
      - CORE_PEER_LOCALMSPID=Org1MSP
    volumes:
      - /var/run/:/host/var/run/
      - ./crypto-config/peerOrganizations/org1.example.com/peers/peer1.org1.example.com/msp:/etc/hyperledger/fabric/msp
      - ./crypto-config/peerOrganizations/org1.example.com/peers/peer1.org1.example.com/tls:/etc/hyperledger/fabric/tls
    ports:
      - 8051:7051
      - 8052:7052
      - 8053:7053

  cli:
    container_name: cli
    image: hyperledger/fabric-tools
    tty: true
    environment:
      - GOPATH=/opt/gopath
      - CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
      - CORE_LOGGING_LEVEL=DEBUG
      - CORE_PEER_ID=cli
      - CORE_PEER_ADDRESS=peer0.org1.example.com:7051
      - CORE_PEER_LOCALMSPID=Org1MSP
      - CORE_PEER_TLS_ENABLED=true
      - CORE_PEER_TLS_CERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/server.crt
      - CORE_PEER_TLS_KEY_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/server.key
      - CORE_PEER_TLS_ROOTCERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/ca.crt
      - CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/users/Admin@org1.example.com/msp
    working_dir: /opt/gopath/src/github.com/hyperledger/fabric/peer
    #command: /bin/bash -c './scripts/script.sh ${CHANNEL_NAME}; sleep $TIMEOUT'
    volumes:
        - /var/run/:/host/var/run/
        - ../chaincode/go/:/opt/gopath/src/github.com/hyperledger/fabric/examples/chaincode/go
        - ./crypto-config:/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/
        - ./scripts:/opt/gopath/src/github.com/hyperledger/fabric/peer/scripts/
        - ./channel-artifacts:/opt/gopath/src/github.com/hyperledger/fabric/peer/channel-artifacts
    extra_hosts:
      - "orderer0.example.com:192.168.3.231"
      - "orderer1.example.com:192.168.3.232"
      - "orderer2.example.com:192.168.3.233"
      - "peer0.org1.example.com:192.168.3.231"
      - "peer1.org1.example.com:192.168.3.231"
      - "peer0.org2.example.com:192.168.3.232"
      - "peer1.org2.example.com:192.168.3.233"

分发配置文件至其他服务器：

scp -r e2e_cli root@192.168.1.1:/tmp

3、微调各个节点分发到的配置文件，并启动容器

先在各个节点上启动zookeeper：

docker-compose -f docker-compose-zookeeper.yaml up -d

然后在各个节点上启动kafka：

docker-compose -f docker-compose-kafka.yaml up -d

各个节点启动orderer：

docker-compose -f docker-compose-orderer.yaml up -d

根据联盟结构，启动各自的peer：

docker-compose -f docker-compose-peer.yaml up -d

4、使用cli构建网络，通道，链码等，并进行测试

docker exec -it cli bash
./script/script.sh

猜你喜欢

转载自blog.csdn.net/fangdengfu123/article/details/80355763
今日推荐
Arc Browser for Windows 1.0 正式 GA
90后程序员开发视频搬运软件、不到一年获利超 700 万，结局很刑！
《美国对全球网络空间安全与发展的威胁和破坏》报告发布
火速冲上 GitHub 热榜 —— 开源编程语言、框架哪有这么可爱？
北京人形机器人创新中心发布全球首个纯电驱拟人奔跑的全尺寸人形机器人“天工”
周排行
rbac——界面、权限
Apache CXF + SpringMVC 整合发布WebService
so插件化
Vue.js实战系列---图标字体制作（svg格式）
PAT乙级 1007 素数对猜想(孪生素数对) (20分) ---（C语言 + 详细注释）
被IRM保护的文档，打开失败
Calendar和Date计算日期差的小问题
win10子系统ubuntu18.4安装docker
利用Wrap Shell Script定位Android Native内存泄漏
MySQL: Transaction (Part I - Basic Concept)
每日归档
更多
2024-05-03(19)
2024-05-02(0)
2024-05-01(4)
2024-04-30(1)
2024-04-29(40)
2024-04-28(0)
2024-04-27(56)
2024-04-26(39)
2024-04-25(22)
2024-04-24(36)

代码天地 © 2018 codetd.com

境外服务器   最新电视剧2022