KeepAlived+Redis+Haproxy实现主从热备、负载均衡、秒级切换实战

Redis+Keepalived+Haproxy 的集群架构，分别用六个端口，实现多路复用，最终实现主从热备、负载均衡、秒级切换。

一、部署Redis集群

1、环境

3台虚拟机模拟6个节点，一台机器2个节点，创建出3 master、3 salve 环境
redis1: 192.168.222.120
redis2: 192.168.222.110
redis3: 192.168.222.100

2、安装 redis 实例（6节点）

1、修改集群主机名

[root@localhost ~]# hostnamectl --static set-hostname redis1
[root@localhost ~]# hostnamectl --static set-hostname redis2
[root@localhost ~]# hostnamectl --static set-hostname redis3

3、hosts文件配置

[root@redis01 ~]# cat >> /etc/hosts << EOF 
192.168.222.120 redis1
192.168.222.110 redis2
192.168.222.100 redis3
EOF

4、修改系统参数(所有节点)

1.修改最大可打开数

[root@redis01 ~]# cat >> /etc/security/limits.conf << EOF
soft nofile 102400
hard nofile 102400
EOF

2.设置TCP监听队列大小

[root@redis01 ~]# echo "net.core.somaxconn = 32767" >> /etc/sysctl.conf

3、OOM相关：vm.overcommit_memory

[root@redis01 ~]# echo "vm.overcommit_memory=1" >> /etc/sysctl.conf
[root@redis01 ~]# sysctl -p

/proc/sys/vm/overcommit_memory”默认值为0，表示不允许申请超过CommitLimmit大小的内存。可以设置为1关闭Overcommit，设置方法请参照net.core.somaxconn完成

4、开启内核的“Transparent Huge Pages (THP)”特性

为了保证永久生效，将以下写入/etc/rc.local

[root@redis01 ~]# echo "echo never > /sys/kernel/mm/transparent_hugepage/enabled"  >> /etc/rc.local
[root@redis01 ~]# chmod +x /etc/rc.local

5、安装 redis 并配置 redis-cluster

1、安装gcc套装

[root@redis01 ~]# yum -y install gcc glibc glibc-kernheaders  glibc-common glibc-devel make

2、升级gcc

[root@redis01 ~]# yum -y install centos-release-scl
[root@redis01 ~]# yum -y install devtoolset-9-gcc devtoolset-9-gcc-c++ devtoolset-9-binutils
[root@redis01 ~]# scl enable devtoolset-9 bash

3、设置永久升级

[root@redis01 ~]# echo "source /opt/rh/devtoolset-9/enable" >>/etc/profile

4、redis01 安装

[root@redis01 ~]# cd /usr/local/src
[root@redis01 ~]# wget http://download.redis.io/releases/redis-6.0.5.tar.gz
[root@redis01 ~]# tar -zxvf redis-6.0.5.tar.gz
[root@redis01 ~]# cd redis-6.0.5/
[root@redis01 ~]# make
[root@redis01 ~]# make install PREFIX=/usr/local/redis-cluster

1、创建实例目录

[root@redis01 ~]# mkdir -p /redis/{6001,6002}/{conf,data,log}

2、配置

配置官方配置文件，去掉#开头的和空格行

[root@redis01 ~]# grep -Ev "^$|#" /usr/local/redis-6.0.5/redis.conf

1、redis01 6001 配置文件
开启daemon守护进程，开启cluster-enabled——这个开启之后，才能开启redis集群

[root@redis01 conf]# cd /redis/6001/conf
[root@redis01 conf]# cat >> redis.conf << EOF
bind 0.0.0.0
protected-mode no
port 6001
dir /redis/6001/data
cluster-enabled yes
cluster-config-file /redis/6001/conf/nodes.conf
cluster-node-timeout 5000
appendonly yes
daemonize yes
pidfile /redis/6001/redis.pid
logfile /redis/6001/log/redis.log
EOF

2.redis01 6002配置文件

[root@redis01 conf]# sed 's/6001/6002/g' redis.conf > /redis/6002/conf/redis.conf

3、启动脚本 start-redis-cluster.sh

[root@redis01 ~]# cat >/usr/local/redis-cluster/start-redis-cluster.sh<<-EOF
#!/bin/bash
REDIS_HOME=/usr/local/redis-cluster
REDIS_CONF=/redis
$REDIS_HOME/bin/redis-server $REDIS_CONF/6001/conf/redis.conf
$REDIS_HOME/bin/redis-server $REDIS_CONF/6002/conf/redis.conf
EOF

4、添加权限

[root@redis01 ~]# chmod +x /usr/local/redis-cluster/start-redis-cluster.sh

5、启动 redis

[root@redis01 ~]# bash /usr/local/redis-cluster/start-redis-cluster.sh

3、检查 redis 启动情况

[root@redis01 redis]# netstat -tnlp | grep redis
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       PID/Program name
tcp        0      0 0.0.0.0:16001           0.0.0.0:*               LISTEN      5667/redis-server 0
tcp        0      0 0.0.0.0:16002           0.0.0.0:*               LISTEN      5673/redis-server 0
tcp        0      0 0.0.0.0:6001            0.0.0.0:*               LISTEN      5667/redis-server 0
tcp        0      0 0.0.0.0:6002            0.0.0.0:*               LISTEN      5673/redis-server 0

查看进程启动情况

[root@redis01 redis]# ps -ef | grep redis
root       5730      1  0 14:02 ?        00:00:00 /usr/local/redis-cluster/bin/redis-server 0.0.0.0:6001 [cluster]
root       5732      1  0 14:02 ?        00:00:00 /usr/local/redis-cluster/bin/redis-server 0.0.0.0:6002 [cluster]
root       5744   1383  0 14:06 pts/0    00:00:00 grep --color=auto redis

4、创建集群

出现交互，输入yes

[root@redis01 bin]# ./redis-cli --cluster create 192.168.222.120:6001 192.168.222.120:6002 192.168.222.110:6001 192.168.222.110:6002 192.168.222.100:6001 192.168.222.100:6002 --cluster-replicas 1
Performing hash slots allocation on 6 nodes...
Master[0] -> Slots 0 - 5460
Master[1] -> Slots 5461 - 10922
Master[2] -> Slots 10923 - 16383
Adding replica 192.168.222.110:6002 to 192.168.222.120:6001
Adding replica 192.168.222.100:6002 to 192.168.222.110:6001
Adding replica 192.168.222.120:6002 to 192.168.222.100:6001
M: 4e77fd97e6d288a8bf2893791ff1cfa34b036bc8 192.168.222.120:6001
slots:[0-5460] (5461 slots) master
S: bf1ac05a6a62d08cca9104afac6cc1633335ff39 192.168.222.120:6002
replicates 56f4068d0f77eca95bc243b25884933877bef162
M: 82f5debb0cb2c7ad0bef3ada51b7abfea7aa8e05 192.168.222.110:6001
slots:[5461-10922] (5462 slots) master
S: bbf49544225d661345b1971915165fc401b5ff6c 192.168.222.110:6002
replicates 4e77fd97e6d288a8bf2893791ff1cfa34b036bc8
M: 56f4068d0f77eca95bc243b25884933877bef162 192.168.222.100:6001
slots:[10923-16383] (5461 slots) master
S: 480ad0d2eebaf2188aafca9e1f3566fe51412db4 192.168.222.100:6002
replicates 82f5debb0cb2c7ad0bef3ada51b7abfea7aa8e05
Can I set the above configuration? (type 'yes' to accept): yes
Nodes configuration updated
Assign a different config epoch to each node
Sending CLUSTER MEET messages to join the cluster
Waiting for the cluster to join

Performing Cluster Check (using node 192.168.222.120:6001)
M: 4e77fd97e6d288a8bf2893791ff1cfa34b036bc8 192.168.222.120:6001
slots:[0-5460] (5461 slots) master
1 additional replica(s)
S: 480ad0d2eebaf2188aafca9e1f3566fe51412db4 192.168.222.100:6002
slots: (0 slots) slave
replicates 82f5debb0cb2c7ad0bef3ada51b7abfea7aa8e05
S: bbf49544225d661345b1971915165fc401b5ff6c 192.168.222.110:6002
slots: (0 slots) slave
replicates 4e77fd97e6d288a8bf2893791ff1cfa34b036bc8
S: bf1ac05a6a62d08cca9104afac6cc1633335ff39 192.168.222.120:6002
slots: (0 slots) slave
replicates 56f4068d0f77eca95bc243b25884933877bef162
M: 56f4068d0f77eca95bc243b25884933877bef162 192.168.222.100:6001
slots:[10923-16383] (5461 slots) master
1 additional replica(s)
M: 82f5debb0cb2c7ad0bef3ada51b7abfea7aa8e05 192.168.222.110:6001
slots:[5461-10922] (5462 slots) master
1 additional replica(s)
[OK] All nodes agree about slots configuration.
Check for open slots...
Check slots coverage...
[OK] All 16384 slots covered.

5、集群验证

[root@redis01 bin]# ./redis-cli -p 6001
127.0.0.1:6001> CLUSTER NODES
480ad0d2eebaf2188aafca9e1f3566fe51412db4 192.168.222.100:6002@16002 slave 82f5debb0cb2c7ad0bef3ada51b7abfea7aa8e05 0 1593954565000 6 connected
bbf49544225d661345b1971915165fc401b5ff6c 192.168.222.110:6002@16002 master - 0 1593954566916 7 connected 0-5460
bf1ac05a6a62d08cca9104afac6cc1633335ff39 192.168.222.120:6002@16002 slave 56f4068d0f77eca95bc243b25884933877bef162 0 1593954566512 5 connected
56f4068d0f77eca95bc243b25884933877bef162 192.168.222.100:6001@16001 master - 0 1593954566000 5 connected 10923-16383
82f5debb0cb2c7ad0bef3ada51b7abfea7aa8e05 192.168.222.110:6001@16001 master - 0 1593954566000 3 connected 5461-10922
4e77fd97e6d288a8bf2893791ff1cfa34b036bc8 192.168.222.120:6001@16001 myself,slave bbf49544225d661345b1971915165fc401b5ff6c 0 1593954565000 1 connected

二、部署Keepalived，实现主从热备、秒级切换

1、环境

两台虚拟机或者选择集群中的任意两个节点配置
keepalived1：192.168.222.120
keepalived2：192.168.222.110
VIP地址：192.168.222.150

2、安装keepalived

yum -y install keepalived

3、修改配置文件

1、keepalived1 配置

! Configuration File for keepalived
global_defs {
    
    
    router_id haproxy_01
 }

vrrp_script haproxy_chk.sh {
    
    
    script "/etc/keepalived/haproxy_chk.sh"
    interval 2
    weight 2
 }

vrrp_instance VI_1 {
    
    
    state MASTER
    interface ens33
    virtual_router_id 51
    priority 100
    authentication {
    
    
        auth_type PASS
        auth_pass 1111
 }
track_script {
    
    
    haproxy_chk.sh
 }
virtual_ipaddress {
    
    
    192.168.222.150/24
 }
 }

2、keepalived2 配置

! Configuration File for keepalived
 global_defs {
    
    
    router_id haproxy_02
 }
vrrp_script haproxy_chk.sh {
    
    
    script "/etc/keepalived/haproxy_chk.sh"
    interval 2
    weight 2
 }

vrrp_instance VI_1 {
    
    
    state BACKUP
    interface ens33
    virtual_router_id 51
    priority 50
    authentication {
    
    
        auth_type PASS
        auth_pass 1111
 }
track_script {
    
    
    haproxy_chk.sh
 }
virtual_ipaddress {
    
    
    192.168.222.150/24
 }
 }

3、健康检测脚本 haproxy_chk.sh

#!/usr/bin/env bash
/usr/bin curl -I http://localhost &> /dev/null
if [ $? -ne 0 ];then
        /etc/init.d/keepalived stop
fi

4、开启服务验证是VIP

[root@redis01 bin]# ./redis-cli -h 192.168.222.150 -p 6001
192.168.222.150:6001> auth redis

三、部署haproxy，实现访问6379端口时，轮询访问六个节点

1、安装 haproxy

任选一台机器安装haproxy

yum -y install haproxy

2、创建 haproxy.conf

在配置文件中，定义浏览器访问的端口、url和用来登录的账号密码

global
    log                     127.0.0.1 local2
    chroot                  /var/lib/haproxy
    pidfile                 /var/run/haproxy.pid
    maxconn                 4000
    user                    haproxy
    group                   haproxy
    daemon

defaults
    mode                     http
    log                      global
    option                   dontlognull
    retries                  3
    maxconn                  3000
    contimeout               50000
    clitimeout               50000
    srvtimeout               50000

listen stats
    bind                    *:8888
    stats                   enable
    stats                    hide-version
    stats uri               /haproxystats
    stats realm             Haproxy\ stats
    stats auth              admin:admin
    stats admin             if TRUE

listen admin_stat
        bind 0.0.0.0:8888
        mode http
        stats refresh 30s
        stats uri /haproxystats
        stats realm Haproxy\ stats
        stats auth admin:admin
        stats enable
backend app
    balance     roundrobin
    server  redis 192.168.222.120:6001 check
    server  redis 192.168.222.120:6002 check
    server  redis 192.168.222.110:6001 check
    server  redis 192.168.222.110:6002 check
    server  redis 192.168.222.100:6001 check
    server  redis 192.168.222.100:6002 check

3、Haproxy rsyslog 日志配置

1.创建日志目录

[root@haproxy-lb1 ~]# mkdir /var/log/haproxy
[root@haproxy-lb1 ~]# chmod a+w /var/log/haproxy

2.开启 rsyslog 记录 haproxy 日志

# Provides UDP syslog reception

$ModLoad imudp                           #开启
$UDPServerRun 514                        #开启

# Provides TCP syslog reception

$ModLoad imtcp                           #开启
$InputTCPServerRun 514                   #开启

# haproxy log
local0.*    /var/log/haproxy/haproxy.log  # 添加

3.重启rsyslog并修改haproxy配置

[root@redis02 haproxy]# systemctl restart rsyslog

[root@redis02 haproxy]# vim haproxy.cfg
global
    log                     127.0.0.1 local2
    chroot                  /var/lib/haproxy
    pidfile                 /var/run/haproxy.pid
    maxconn                 4000
    user                    haproxy
    group                   haproxy
    daemon
    chroot                  /var/lib/haproxy       #添加
    pidfile                 /var/run/haproxy.pid   #添加

[root@redis02 haproxy]# systemctl restart haproxy

4.查看bind监听端口

[root@redis02 haproxy]# netstat -tunlp | grep 514
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       PID/Program name
tcp        0      0 0.0.0.0:514             0.0.0.0:*               LISTEN      7089/rsyslogd
tcp6       0      0 :::514                  :::*                    LISTEN      7089/rsyslogd
udp        0      0 0.0.0.0:514             0.0.0.0:*                           7089/rsyslogd
udp6       0      0 :::514                  :::*                                7089/rsyslogd

4、haproxy 监控页面访问验证

在这里插入图片描述
这里如果能够看到自己的集群状态，就说明集群已经在haproxy能够监控的到了。

KeepAlived+Redis+Haproxy实现主从热备、负载均衡

KeepAlived+Redis+Haproxy实现主从热备、负载均衡、秒级切换实战

一、部署Redis集群

1、环境

2、安装 redis 实例 （6节点）

1、修改集群主机名

3、hosts文件配置

4、修改系统参数(所有节点)

1.修改最大可打开数

2.设置TCP监听队列大小

3、OOM相关：vm.overcommit_memory

4、开启内核的“Transparent Huge Pages (THP)”特性

5、安装 redis 并配置 redis-cluster

1、安装gcc套装

2、升级gcc

3、设置永久升级

4、redis01 安装

1、创建实例目录

2、配置

3、检查 redis 启动情况

4、创建集群

5、集群验证

二、部署Keepalived，实现主从热备、秒级切换

1、环境

2、安装keepalived

3、修改配置文件

1、keepalived1 配置

2、keepalived2 配置

3、健康检测脚本 haproxy_chk.sh

4、开启服务验证是VIP

三、部署haproxy，实现访问6379端口时，轮询访问六个节点

1、安装 haproxy

2、创建 haproxy.conf

3、Haproxy rsyslog 日志配置

1.创建日志目录

2.开启 rsyslog 记录 haproxy 日志

3.重启rsyslog并修改haproxy配置

4.查看bind监听端口

4、haproxy 监控页面访问验证

猜你喜欢

2、安装 redis 实例（6节点）