AAC简介

AAC共有9种规格，以适应不同的场合的需要：

MPEG-2 AAC LC 低复杂度规格（Low Complexity）--比较简单，没有增益控制，但提高了编码效率，在中等码率的编码效率以及音质方面，都能找到平衡点

MPEG-2 AAC Main 主规格

MPEG-2 AAC SSR 可变采样率规格（Scaleable Sample Rate）

MPEG-4 AAC LC低复杂度规格（Low Complexity）------现在的手机比较常见的MP4文件中的音频部份就包括了该规格音频文件

MPEG-4 AAC Main 主规格 ------包含了除增益控制之外的全部功能，其音质最好

MPEG-4 AAC SSR 可变采样率规格（Scaleable Sample Rate）

MPEG-4 AAC LTP 长时期预测规格（Long Term Predicition）

MPEG-4 AAC LD 低延迟规格（Low Delay）

MPEG-4 AAC HE 高效率规格（High Efficiency）-----这种规格适合用于低码率编码，有Nero ACC 编码器支持

AAC音频格式有ADIF和ADTS：

ADIF：Audio Data Interchange Format 音频数据交换格式。这种格式的特征是可以确定的找到这个音频数据的开始，

不需进行在音频数据流中间开始的解码，即它的解码必须在明确定义的开始处进行。故这种格式常用在磁盘文件中。

adif格式：

adif_header:

adif_id always:"ADIF"。

ADTS：Audio Data Transport Stream 音频数据传输流。这种格式的特征是它是一个有同步字的比特流，

解码可以在这个流中任何位置开始。它的特征类似于mp3数据流格式。

adts_header:

链接：https://www.jianshu.com/p/30856dccd9cb

int getADTSframe(unsigned char* buffer, int buf_size, unsigned char* data, int* data_size) {
    int size = 0;

    if (!buffer || !data || !data_size) {
        return -1;
    }

    while (1) {
        if (buf_size < 7) {
            return -1;
        }
        //Sync words
        if ((buffer[0] == 0xff) && ((buffer[1] & 0xf0) == 0xf0)) {
            size |= ((buffer[3] & 0x03) << 11);     //high 2 bit
            size |= buffer[4] << 3;                //middle 8 bit
            size |= ((buffer[5] & 0xe0) >> 5);        //low 3bit
            break;
        }
        --buf_size;
        ++buffer;
    }

    if (buf_size < size) {
        return 1;
    }

    memcpy(data, buffer, size);
    *data_size = size;

    return 0;
}

int simplest_aac_parser(char *url)
{
    int data_size = 0;
    int size = 0;
    int cnt = 0;
    int offset = 0;

    //FILE *myout=fopen("output_log.txt","wb+");
    FILE *myout = stdout;

    unsigned char *aacframe = (unsigned char *)malloc(1024 * 5);
    unsigned char *aacbuffer = (unsigned char *)malloc(1024 * 1024);

    FILE *ifile = fopen(url, "rb");
    if (!ifile) {
        printf("Open file error");
        return -1;
    }

    printf("-----+- ADTS Frame Table -+------+\n");
    printf(" NUM | Profile | Frequency| Size |\n");
    printf("-----+---------+----------+------+\n");

    while (!feof(ifile)) {
        data_size = fread(aacbuffer + offset, 1, 1024 * 1024 - offset, ifile);
        unsigned char* input_data = aacbuffer;

        while (1)
        {
            int ret = getADTSframe(input_data, data_size, aacframe, &size);
            if (ret == -1) {
                break;
            }
            else if (ret == 1) {
                memcpy(aacbuffer, input_data, data_size);
                offset = data_size;
                break;
            }

            char profile_str[10] = { 0 };
            char frequence_str[10] = { 0 };

            unsigned char profile = aacframe[2] & 0xC0;
            profile = profile >> 6;
            switch (profile) {
            case 0: 
                sprintf(profile_str, "Main"); 
                break;
            case 1: 
                sprintf(profile_str, "LC"); 
                break;
            case 2: 
                sprintf(profile_str, "SSR"); 
                break;
            default:
                sprintf(profile_str, "unknown"); 
                break;
            }

            unsigned char sampling_frequency_index = aacframe[2] & 0x3C;
            sampling_frequency_index = sampling_frequency_index >> 2;
            switch (sampling_frequency_index) {
            case 0:
                sprintf(frequence_str, "96000Hz");
                break;
            case 1:
                sprintf(frequence_str, "88200Hz");
                break;
            case 2:
                sprintf(frequence_str, "64000Hz"); 
                break;
            case 3: 
                sprintf(frequence_str, "48000Hz"); 
                break;
            case 4: 
                sprintf(frequence_str, "44100Hz"); 
                break;
            case 5: 
                sprintf(frequence_str, "32000Hz"); 
                break;
            case 6: 
                sprintf(frequence_str, "24000Hz"); 
                break;
            case 7: 
                sprintf(frequence_str, "22050Hz"); 
                break;
            case 8: 
                sprintf(frequence_str, "16000Hz"); 
                break;
            case 9: 
                sprintf(frequence_str, "12000Hz"); 
                break;
            case 10: 
                sprintf(frequence_str, "11025Hz"); 
                break;
            case 11: 
                sprintf(frequence_str, "8000Hz"); 
                break;
            default:
                sprintf(frequence_str, "unknown"); 
                break;
            }


            fprintf(myout, "%5d| %8s|  %8s| %5d|\n", cnt, profile_str, frequence_str, size);
            data_size -= size;
            input_data += size;
            cnt++;
        }

    }
    fclose(ifile);
    free(aacbuffer);
    free(aacframe);

    return 0;
}

链接：https://blog.csdn.net/leixiaohua1020/article/details/50535042