总目录：https://blog.csdn.net/qq_41106844/article/details/105553392
Hadoop - 子目录：https://blog.csdn.net/qq_41106844/article/details/105553369
Ambari+HDP简介
虚拟机准备
| 主机名 | IP | 角色 | 内存 | 核数 | 磁盘 |
|---|---|---|---|---|---|
| ambari.lh.com | 192.168.10.190 | Ambari+HDP | 2G | 1 | 20G |
| master.lh.com | 192.168.10.191 | Master | 2G | 1 | 20G |
| slave1.lh.com | 192.168.10.192 | Slave1 | 2G | 1 | 20G |
| slave2.lh.com | 192.168.10.193 | Slave2 | 2G | 1 | 20G |
环境配置
网络配置
ifcfg-ens33
其他几个也是这样配置。
hostname
[root@ambari ~] cat /etc/hostname
ambari.lh.com
修改主机名。
network
[root@ambari ~] cat /etc/sysconfig/network
# Created by anaconda
NETWORKING=yes
HOSTNAME=ambari.lh.com
配置主机名与网络状态的关系。
hosts
[root@ambari ~] cat /etc/hosts
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
192.168.10.190 ambari.lh.com
192.168.10.191 master.lh.com
192.168.10.192 slave1.lh.com
192.168.10.193 slave2.lh.com
ip与主机名映射表。
关闭防火墙
systemctl stop firewalld.service
systemctl disable firewalld.service
服务配置
安装NTP时间同步服务
yum install ntp ntpdate -y
安装httpd服务
yum install httpd -y
systemctl start httpd.service
systemctl enable httpd.service
检查http
关闭SELinux
vim /etc/selinux/config
修改SELINUX=disabled
ssh免密登录
生成密钥
ssh-keygen -t rsa -f ~/.ssh/id_rsa
传输密钥
ssh-copy-id ambari.lh.com
ssh-copy-id master.lh.com
ssh-copy-id slave1.lh.com
ssh-copy-id slave2.lh.com
四台互传
[root@ambari .ssh] ssh-copy-id ambari.lh.com
/usr/bin/ssh-copy-id: INFO: Source of key(s) to be installed: "/root/.ssh/id_rsa.pub"
The authenticity of host 'ambari.lh.com (192.168.10.190)' can't be established.
ECDSA key fingerprint is SHA256:WHSTGFtt/3LnDgU60HxnG20y4sDogJb3ECIfA/2L3Mk.
ECDSA key fingerprint is MD5:53:ae:4a:0d:8e:55:3c:d7:17:44:c9:5b:00:67:a7:cb.
Are you sure you want to continue connecting (yes/no)? yes
/usr/bin/ssh-copy-id: INFO: attempting to log in with the new key(s), to filter out any th
at are already installed/usr/bin/ssh-copy-id: INFO: 1 key(s) remain to be installed -- if you are prompted now it
is to install the new [email protected]'s password:
Number of key(s) added: 1
Now try logging into the machine, with: "ssh 'ambari.lh.com'"
and check to make sure that only the key(s) you wanted were added.
[root@ambari .ssh] ssh-copy-id master.lh.com
/usr/bin/ssh-copy-id: INFO: Source of key(s) to be installed: "/root/.ssh/id_rsa.pub"
The authenticity of host 'master.lh.com (192.168.10.191)' can't be established.
ECDSA key fingerprint is SHA256:WHSTGFtt/3LnDgU60HxnG20y4sDogJb3ECIfA/2L3Mk.
ECDSA key fingerprint is MD5:53:ae:4a:0d:8e:55:3c:d7:17:44:c9:5b:00:67:a7:cb.
Are you sure you want to continue connecting (yes/no)? yes
/usr/bin/ssh-copy-id: INFO: attempting to log in with the new key(s), to filter out any th
at are already installed/usr/bin/ssh-copy-id: INFO: 1 key(s) remain to be installed -- if you are prompted now it
is to install the new [email protected]'s password:
Number of key(s) added: 1
Now try logging into the machine, with: "ssh 'master.lh.com'"
and check to make sure that only the key(s) you wanted were added.
[root@ambari .ssh] ssh-copy-id slave1.lh.com
/usr/bin/ssh-copy-id: INFO: Source of key(s) to be installed: "/root/.ssh/id_rsa.pub"
The authenticity of host 'slave1.lh.com (192.168.10.192)' can't be established.
ECDSA key fingerprint is SHA256:WHSTGFtt/3LnDgU60HxnG20y4sDogJb3ECIfA/2L3Mk.
ECDSA key fingerprint is MD5:53:ae:4a:0d:8e:55:3c:d7:17:44:c9:5b:00:67:a7:cb.
Are you sure you want to continue connecting (yes/no)? yes
/usr/bin/ssh-copy-id: INFO: attempting to log in with the new key(s), to filter out any th
at are already installed/usr/bin/ssh-copy-id: INFO: 1 key(s) remain to be installed -- if you are prompted now it
is to install the new [email protected]'s password:
Number of key(s) added: 1
Now try logging into the machine, with: "ssh 'slave1.lh.com'"
and check to make sure that only the key(s) you wanted were added.
[root@ambari .ssh] ssh-copy-id slave2.lh.com
/usr/bin/ssh-copy-id: INFO: Source of key(s) to be installed: "/root/.ssh/id_rsa.pub"
The authenticity of host 'slave2.lh.com (192.168.10.193)' can't be established.
ECDSA key fingerprint is SHA256:WHSTGFtt/3LnDgU60HxnG20y4sDogJb3ECIfA/2L3Mk.
ECDSA key fingerprint is MD5:53:ae:4a:0d:8e:55:3c:d7:17:44:c9:5b:00:67:a7:cb.
Are you sure you want to continue connecting (yes/no)? yes
/usr/bin/ssh-copy-id: INFO: attempting to log in with the new key(s), to filter out any th
at are already installed/usr/bin/ssh-copy-id: INFO: 1 key(s) remain to be installed -- if you are prompted now it
is to install the new [email protected]'s password:
Number of key(s) added: 1
Now try logging into the machine, with: "ssh 'slave2.lh.com'"
and check to make sure that only the key(s) you wanted were added.
jdk环境
首先创建放软件的文件夹。
cd /usr
mkdir hdk
然后上传安装包，解压
[root@ambari hdk] tar -zxvf jdk-1.8.tar.gz
[root@ambari hdk] ll
总用量 155296
drwxr-xr-x. 8 10 143 255 6月 17 2014 jdk1.8.0_11
-rw-r--r--. 1 root root 159019376 4月 3 15:16 jdk-1.8.tar.gz
[root@ambari hdk] rm jdk-1.8.tar.gz
rm：是否删除普通文件 "jdk-1.8.tar.gz"？y
[root@ambari hdk] mv jdk1.8.0_11/ jdk8
[root@ambari hdk] ll
总用量 0
drwxr-xr-x. 8 10 143 255 6月 17 2014 jdk8
配置环境变量
vi /etc/profile
# jdk8
export JAVA_HOME=/usr/hdk/jdk8
PATH=$JAVA_HOME/bin:$PATH
export PATH
刷新环境变量
[root@ambari hdk] source /etc/profile
[root@ambari hdk] java -version
java version "1.8.0_11"
Java(TM) SE Runtime Environment (build 1.8.0_11-b12)
Java HotSpot(TM) 64-Bit Server VM (build 25.11-b03, mixed mode)
把环境变量文件和jdk8目录传到其他节点上。
scp /etc/profile [email protected]:/etc
scp /etc/profile [email protected]:/etc
scp /etc/profile [email protected]:/etc
scp -r jdk8/ [email protected]:/usr/hdk
scp -r jdk8/ [email protected]:/usr/hdk
scp -r jdk8/ [email protected]:/usr/hdk
然后各自刷新环境变量。
这样四个节点的java环境就ok了。
mysql5.6
先检查是否已经安装了MySQL。
rpm -qa | grep mysql
返回空就是没有安装。
然后卸载mariadb数据库，因为在centos7中默认集成mariadb数据库。
rpm -qa|grep mariadb|xargs rpm -e --nodeps
检查是否卸掉
rpm -qa|grep -i mariadb
接着正式安装mysql5.6
下载
wget http://repo.mysql.com/mysql-community-release-el7-5.noarch.rpm
安装
rpm -ivh mysql-community-release-el7-5.noarch.rpm
yum install mysql-server
设置服务
systemctl start mysqld.service #启动 mysql
systemctl restart mysqld.service #重启 mysql
systemctl stop mysqld.service #停止 mysql
systemctl enable mysqld.service #设置 mysql 开机启动
设置密码
mysql -u root
mysql> use mysql;
mysql> update user set password=PASSWORD("123456") where User='root';
mysql> flush privileges;
设置远程访问
mysql> use mysql
mysql> select User, Host, Password from user;
mysql> update user set host='%' where host='localhost';
mysql> delete from user where Host='ambari.gey.com';
mysql> delete from user where Host='127.0.0.1';
mysql> delete from user where Host='::1';
mysql> flush privileges;
