4.2 to solve the problem Ubuntu 18.04 Chinese input method, installation Sogou Pinyin

table of Contents

4.2.1 Introduction

4.2.2 Test whether the installation fcitx

4.2.3 AnSo fcitx

4.2.4 placed fcitx

4.2.5 select the required input method

4.2.6 installation Sogou Pinyin

4.2.1 Introduction

You can not enter Chinese on how to install the input method, I mainly refer to the following this blog!

Problem solving Ubuntu 18.04 Chinese input method, installation Sogou Pinyin

4.2.2 Test whether the installation fcitx

First to detect whether there fcitx, because Sogou Pinyin rely fcitx

> fcitx

Tip: Program "fcitx" has not been installed. You can use the following command to install:

> sudo apt-get install fcitx-bin

4.2.3 AnSo fcitx

FIG 1 according to the command prompts sudo apt install fcitx-bin shown in FIG.

2 to start the installation myself, I encountered this problem, just follow the prompts for commands that can be!

After step 1.2, fcitx installation was successful, as shown!

3 mounted input. Shown below according to a command input!

4.2.4 placed fcitx

The default iBus (very difficult to use), we said earlier, and after the installation of wishful fcixt you can do in the keyboard input mode system at replace it with fcitx (as shown below). Then restart Ubuntu.

FIG steps according to the following:

Find [Setup]

After entering the [Settings], [manage to find the installed language]

I encountered a problem, then click [Install] to continue.

Below, as if being installed look.

After installation, the keyboard input method system [options] here was changed by the iBus [] [] fcitx

4.2.5 select the required input method

(This step is due to forget shots, direct excerpt beginning to put Bowen link, in fact, this configuration following Sogou Pinyin is the same as [4.2.6 installation Sogou Pinyin] 4.2.5 In fact, I skip a step, because I just want to to me the most familiar Sogou Pinyin it!)

Open the top right corner of the top bar click the Ubuntu icon keypad configuration, as shown below: