Environment: win10 Pro, Lenovo 30D9 motherboard
ubuntu: 18.04.2LTS; Ubuntu mirror portal: https: //ubuntu.com/download/desktop
There are two hard drives, win10 installed in the solid state, ubuntu ready to install the machinery.
During installation, the main method according to [1], [2] also reference [3] and a portion of the computer's motherboard BIOS portion are not the same, the specific setting method may not be the same, to find a multi-look ( It is noteworthy that the method described in [1] by UEFI boot mode, if it is Legacy might not work; at the same time introducing the English version is installed, the same installation Chinese). Installed windows more familiar friends, to ensure that the startup sequence in the first row u disk during installation; it does not matter friends are not familiar with, such as the use of Master Lu detect hardware -> motherboard model, Baidu, different motherboard, BIOS inquiry into the way and set the boot sequence and so on, a lot of tutorials are introduced.
Mainly talk about some of the problems that arise during installation :( Unfortunately, due to the installation process resulting in no forget Screenshot Figure)
1. When making Ubuntu boot disk, first of all to the U disk formatted as NTFS file system because FAT32 can not be one-off 4G is written over the content, a necessary step to install windows, of course, when installing the Ubuntu, also preferably formatted NTFS file system.
2. Before you install Ubuntu, install [3] the windows settings "Disable Quick Launch" while the installation process Secure Boot is set to Disabled state.
3. In the District, if the hard disk status appears as "not available" instead of "idle" and see whether the hard disk has four primary partitions, and Ubuntu should be a maximum of four primary partitions; or if you already have four the extra four, need to re-enter the windows disk management, delete the excess number of disks (PS: remember to save before you delete the disk file, and pay attention to install Ubuntu disk capacity is too large, use up waste, and too small enough; can be re-allocated space through the "compressed volume" and "extend volume" way)
3. The way according to [1] a method in accordance with, until the end of the installation after the reboot, disconnect the U disk.
4. when you restart: No win10 and select Ubuntu interface, direct access to win10.
Do not panic, continue to plug in the U disk, U disk holding the first boot sequence, enter the trial version (that is, into the first U disk), in accordance with [4] tutorials conducted a number of operations required to complete the period, follow the prompts to complete Since some tips are in English, do not understand friends, you need to manually Google translation; until, off, unplug the U disk.
5. Power, reset the normal startup sequence.
6 . If there is direct access to Ubuntu, can not enter the win10, in accordance with [5] entered in accordance with good Ubuntu, you can enter a command to repair, repair finished, restart screen will appear choose Ubuntu or win10.
参考文献
【1】https://www.jianshu.com/p/fe4e3915495e
【2】https://www.jianshu.com/p/38e6be8efecf
【3】https://www.jianshu.com/p/d79821e9fdbe
【4】https://blog.csdn.net/heart_1014/article/details/54016687
【5】https://blog.csdn.net/liuyafan/article/details/90081033