Statement: where I is already installed on the machine base Ubuntu system installed on Windows 10 (Windows 10 is guided manner UEFI, hard disk format: GPT, the machine card: Inter Graphics530 + GTX960M)
1. Preparation tool
- A computer with Internet access.
- 8GU a disk. (Note: U disk inside Do not keep important files would be cleared later U disk)
2. Download Ubuntu operating system - Direct access to Ubuntu official website to download, I am here to download the Ubuntu117.10Desktop version, here to give a URL: https://www.ubuntu.com/download/desktop
3. Production Ubuntu system U disk boot tool
1. Download the floppy disk through ( UltralSO) burning tool
directly via floppy disk will appear in the search interface Baidu图3.1here select Normal download, can be installed after the download is complete. 2. Make a boot floppy disk through U disk 1) plug in the U disk, floppy disk through open, choose to continue the trial (U tray do not have any files, U disk will clear later)图3.22) click on the file and select Open, locate the downloaded Ubuntu image and open图3.3
3) Click Start, select write disk image
It should be noted that the hard drive must be your U disk
After you select a good follow on the map, click Write, until completion percentage to 100%, then start the U disk finished, you can start preparing to install Ubuntu hard disk space.
4) prepare the computer hard disk space. On the desktop, the mouse to select the computer (the computer) Right Select Management -> Storage -> Disk Management, open disk management, select one of the remaining partition larger partition, right select the compression volume, for example:
3.6 FIG
Compression space where according to their wishes may be, for example 80G, then enter 81920 and click compression, there will be a black unallocated space after completion
Figure 3.7
here we are basically ready to work just fine.
4.Ubuntu installation
1) Plug in the U disk, boot, press F10 (my computer startup item selection key is F10 when the display is lit, maybe not F10, part of your computer is F12), enter the selection interface after startup items, find your U plate, e.g. UEFI SanDisk (Note: if the two displays must choose the UEFI U disk format), and press Enter.
2) Select Install Ubuntu, carriage return, will enter 4.2
3) Wait a moment, will automatically enter the installation interface, shown in Figure 4.3 (Note: If you have been stuck in Figure 4.2, Do not worry, read on) if no problem, directly Figure 4.6
If you have been stuck in Figure 4.2, follow the steps to force restart the computer, repeat the above. Note that, in FIG entering 4.1, select Install Ubuntu, and press the E key on the keyboard to enter the FIG 4.4
Use the arrow keys to move the marker quiet splash -, to modify this sentence nouveau.modeset = 0, as shown in FIG 4.5
Then press F10, nothing else, will enter the installation interface.
4) In Figure 4.3 selection, selection of Chinese, the Ubuntu installation, FIG enter 4.6
Here you can put two options are on the hook, and then choose to continue, click Continue, there will be a period of preparation, a long time, and slowly wait. After the ready, will enter the next screen,
the language select Chinese Simplified, continued
Figure 4.7
to Figure 4.7, be sure to select other options, of course, if your Windows system tray large enough, or do not want to use the Windows system can try to select other options . After proceed to Figure 4.8
Found in Step 2 In this screen you out of the compressed free space (note, be sure not to choose wrong, otherwise, the cost of miserable). Then left click can be partitioned, for example:
Figure 4.9
Partition here, can refer to: https: //jingyan.baidu.com/article/4d58d5411380dd9dd5e9c07e.html the bloggers post. After the partition is complete, install the boot loader device a bar to find your boot partition, be sure not to choose the wrong, and then click Continue
Choose to continue,
the next will let you set up a user name and password. Set up their own just fine, set up after the Installation interface, like patience, choose to restart after installation.
5) After the computer restarts, press F10 during boot, nothing else should be able to see Ubuntu boot options, select Ubuntu option, enter a screen similar to Figure 4.1 Note: If your computer can not be directly installed in the previous enter the installation interface, there is still need to be quiet splash - these words into nouveau.modeset = 0, f10 after the wait will enter the system. Do not have this problem directly into the system, behind the content of the brothers did not appear in front of this problem you do not read.
After entering the system, open a terminal, with administrator privileges to modify / etc contents of this document grub / default / this folder, the quiet splash this sentence into nouveau.modeset = 0
if there is su authentication fails, see here . Enter: su passwd root, enter the password when you install. After the carriage return, no problem.
If you want to start the Ubuntu entry to the boot entry option, you can use Easy BCD or EasyUEFI software, there will no longer introduce the specific use of the
boot is not always brush a lot of code, you can put that sentence changed to follow the steps above. " nouveau.modeset = 0 quiet splash pci = noaer "
last $ sudo update-grub