Select Release
For the release of the selection can refer to this website ( http://www.distrowatch.org/) you can see related information for reference purposes only
after repeated selection I chose based on the arch of manjaro
official website to download the ios enter manjaro mirror manjaro Mirror Download the official website address
various versions at different times everyone's appraisal of him is not the same so I can not tell which is better in the end which is more suitable for you, I chose KDE
Making usb!
Can USBwritter or with Rufus or other
I am using a version of rufus3.4. I downloaded the latest version of the partition type can not be selected GPT, so we found the old version. Writing mirror mode selection DD
boot
先进boot把Secure Boot 给设置为disable（否则会遇到Invalid signature detected. Check secure Boot Policy in Setup）
然后设置启动顺序把USB的启动顺序调上来 或者 开机时自己手动进入 选择启动项界面 选择制作的USB,就可以进入manjaro的设置界面了
不过我的笔记本在下一步遇到了问题 执行boot后 卡在了TLP system startup/shutdown 这里完全死机，按什么都没用driver设置成nonfree 和 free 都没用
选择free，一直循环Login Service
选nonfree卡TLP
大致原因就是N卡10系列的显卡驱动导致的卡TLP或卡Logo
解决办法是在引导界面 driver 这一行 按e建
进入后 修改代码 把
driver = free修改为
driver = intel xdriver=mesa acpi_osi=! acpi_osi="Windos 2009"
CTRL+X保存，修改完后的界面
然后在boot这一行按E进入把driver=free 改为 driver=intel
在下一行有一个nouveau.modeset=1改为nouveau.modeset=0
修改后界面 图片里的下划线_是光标
最后CTRL+X 进行boot 然后就可以进入live图形界面了
这里的设置也只是暂时的，后面重启电脑还有可能会遇到卡logo进不去 同样也是要在界面按E进入设置一下，最后进入系统后 还要改文件
sudo nano /boot/grub/grub.cfg搜索第一个quiet然后 在后面输入nouveau.modeset=0
之后的每次更新后都要修改
设置
What is not talked about the various partitions of here (the / boot / efi efi window mounted in a)
If the card is installed in 93% of the time and so no more can choose to continue to wait, but take some time off or directly you can complete the network installation
After the last configuration installed on manjaro can refer to the content of the following two links
Manjaro kde 18.0 installation and basic configuration ( https://www.jianshu.com/p/22ba900ec42c )
Manjaro Xfce 18.0 stepped pit recording ( https://www.cnblogs.com/elinuxboy/p/10123877.html )
Tip: Campus network may encounter various problems such resources can not download the image, I would not change like using a mobile phone equipped with hotspots
On the issue of dual system time is not synchronized
Enter the command in Linux sudo timedatectl set-local-rtc true
specific analysis of the principles
of how to solve the problem and Windows dual system Manjaro eight-hour time difference
Finally there is a question about the boot. Because windows can not boot linux. So the solution is to use grub guide, reference Linux and Windows 10 with grub guide tutorial . But I personally usually do not use linux = - = So I just manually choose F7 into the Startup Items selected manjaro would not go and get that up. Select the machine into the mold of different items to start is not the same