installation steps
1. Open the downloaded Creo software installation package, right-click the compressed package and select [Extract to Creo7.0].
2. Wait for the decompression of the compressed package to complete.
3. Open the unzipped [Creo7.0] folder.
4. Open the [LICENSE] folder.
5. Right-click the [FillLicense] program and select [Run as administrator].
6. If it shows that it cannot be found, close the program and reopen it.
7. When [Delete File] is displayed, press any key on the keyboard and the window will close.
8. Return to the [LICENSE] folder, right-click the [PTC_D_SSQ] file and select [Copy].
9. Open the system C drive.
10. Open the [Program Files] folder.
11. In the opened [Program Files] folder, create a new folder named [PTC].
12. Open the newly created [PTC] folder.
13. In the blank space of the [PTC] folder, paste the [PTC_D_SSQ] file copied previously.
14. Right-click [This PC], and then click [Properties].
15. Click [Advanced system settings].
16. Click [Environment Variables].
17. Click [New].
18. Enter [PTC_D_LICENSE_FILE] for the variable name, enter [C:\LICENSE\PTC_D_SSQ.dat] for the variable value, and then click [OK].
19. Click [OK].
20. Click [OK].
21. Return to the unzipped [Creo7.0] folder, and then open the [Main Program] folder.
22. Double-click to open the [setup] installation program.
23. Select [Install new software] and click [Next].
24. Check the options shown in the figure below, and then click [Next].
25. The software will automatically recognize the license (if it does not recognize it, drag the [PTC_D_SSQ] file previously pasted on the C drive directly into the input box), and the status will display [Available], indicating that there is no problem. Click [Next] directly. .
26. Keep the software installation path as default and click [Next] directly.
27. Click [Install].
28. Please wait while the software is installed.
29. After installation, click [Finish].
30. Return to the unzipped [Creo7.0] folder, and then open the [Crack] folder.
31. Select and [Copy] all files in the folder.
32. Open the system C drive.
33. Open the [Program Files] folder.
34. Open the [PTC] folder.
44. [Paste] the previously copied file in the opened [PTC] folder.
45. Double-click to open the [SolidSQUADLoaderEnabler] file in the current folder.
46. Click [Yes].
47. Click [OK].
48. Open the installed Creo software on the desktop.
49. The installation is completed, and the software opening interface is as shown in the figure below.
