VMware vCenter Server 7.0 Complete Installation Tutorial
Link: https://pan.baidu.com/s/1b8zxEhGX6S3BlTYgUuGseQ
Extraction code: 4mad
The following is the installation tutorial ------------------------------------------- -------------------------------------------------- --------------------
1. Load or decompress the downloaded file
2. Enter the directory of \vcsa-ui-installer\win32. You can see the installed program, double-click to start the installation
3. Select the language in the upper right corner and click Install
4. Click Next
5. Check to accept the terms of the license agreement, and then the next step
6. Fill in the ESXI host name or IP address, enter the user password, the default port, and then the next step
7. Connect to the target server, if there is a certificate warning, click Yes
8. Set the machine name and password of vCenter Server. The password here is the password for logging in to the root of the VC console and then the next step
9. Choose according to your actual situation. I will test it here by default. If there are any non-compliant items, click Next, and it will prompt
10. Select the storage location on the ESXI host, and select the compact mode, then the next step
11. Configure the network information of vCenter Server, and then the next step
12. After the configuration is complete, click Finish
13. Start deployment
14. The first stage deployment is completed, click to continue
15. Begin to deploy the second phase
16. Select time synchronization. If you have NTP, you can choose NTP. If you don’t, you can choose to synchronize with the ESXI host; disable SSH access
Seventeen, configure SSO information
18. Choose whether to join the customer experience improvement, and then the next step
19. Confirm the configuration information of the second stage, and then click Finish
20. Prompt [Once the installation operation starts, it cannot be paused or stopped until the installation is completed. Click "OK" to continue, or click "Cancel" to stop the installation], click OK
21. Start the second phase of configuration, wait for about ten minutes
22. The second stage configuration is complete, click to close
23. Enter the ESXI management interface, check the virtual machine that has just been configured with vCenter server, if the power is not turned on, turn on the power.
24. After booting up, there are three addresses on the screen, the first one is the management address
25. Enter the management address interface and enter the account password
26. The overall interface after logging in.
27. This is the end of the installation. Friends are welcome to learn from it. If there are any details that are not detailed, friends are welcome to point out. If this article helps you, I hope you can click on it Thumbs up.