Huawei S5731-H switch upgrade:

Huawei S5731-H switch upgrade:

1. Use xshell to connect to the switch:

1. Prepare a USB-to-serial cable to connect the switch to the computer

2. Open xshell to connect

   1. 

   2. 

3. After the switch restarts, quickly press ctrl+B alternately, enter the password, the default password is [email protected]to enter the management page

2. Transfer the system file cc to the switch

1. Choose 3 Ethernet transports:

2. Select 2 to set

3. When performing the following steps: First, you need to use a network cable to establish a connection between the switch and the computer

   1. Switch network cable interface 接在交换机的eth网口:

4. Make sure you are on the same network segment

5. Select 1 TFTP transfer and set ip

6. After setting, press 4 to go back

7. Install TFTP file server on your own computer

   1. The following is the official website address of tftp32 http://tftpd32.jounin.net/, download the required version from the official website, double-click and follow the prompts to install step by step.

   2. installed interface

   3. Select by default without making changes

   4. C:\Users\ACER\Desktop\S5713-HPoint to the folder where we store the cc files

8. Turn off the computer's firewall

9. Then select 1 and wait for the transfer to complete

3. Configure the startup file:

1. Return to the main menu interface

2. Press 2 to enter the boot submenu

3. Press 2 to modify the configuration

4. Press 3 to return to main menu

5. Press 7 to restart

6. Note: During the period, it may restart several times, try not to interrupt to avoid bigger mistakes

4. Graphical interface

1. The system comes with a graphical interface
2. Use a network cable to connect the switch and the host, and 网线接入交换机 eth 网口set the computer Ethernet network segment so that they can communicate with each other.
3. Enter the default ip of the switch in the browser of the computer and press Enter to go to the login interface

2. Add a new user

# Take the user name as admin123 and the new password as Example@123 as an example, the configuration is as follows.

<Switch> system-view
[Switch] aaa
[Switch-aaa] local-user admin123 password irreversible-cipher Example@123
[Switch-aaa] local-user admin123 service-type http
[Switch-aaa] local-user admin123 privilege level 15 # 设置等级 
[Switch-aaa] return
<Switch> save

Just log in and you're done: