Huawei S2700 switch
1. Connect the switch with the console cable first.
2. If a password is required when entering the system
3. Password recovery process:
1. Power off and restart the device.
2. When booting up, when prompted this, don't worry about it, just wait for about 30 seconds .
3. (Key point) When the system interface prompts Ctrl+B, quickly press the shortcut key "Ctrl+B"
And enter the password, the default is [email protected]
4. Enter the BootROM/BootLoad display interface
Enter 7 and press Enter: Clear password for console user
Then enter y and enter
5, then enter 1 and enter: Boot with default mode (start the default mode)
At this time, the switch will restart. After the restart is complete, enter the system and prompt whether to enter the console password. At this time, select N
Check the configuration, the console password is cleared:
Restart after saving the configuration
6. Remember to save the configuration: save
will prompt whether to overwrite the configuration, enter "Y". Otherwise, you will have to enter the password again after restarting.
This is done.