1. Enable web configuration mode
This model of Huawei switch (S5735S-L24P4S-A1) does not enable web management mode by default. It is necessary to enable the web management mode through the Console port configuration mode to facilitate the use of the graphical interface to upgrade the operating system
1.进入配置命令模式
Please Press ENTER.
An initial password is required for the first login via the console.
Set a password and keep it safe. Otherwise you will not be able to login via the console.
Please configure the login password (8-16)
Enter Password:[email protected](交换机默认密码)
Confirm Password:[email protected](交换机默认密码)
2. Enable HTTPS service
<HUAWEI>sys
Enter system view, return user view with Ctrl+Z.(Switch echo information)
[HUAWEI]http secure-server enable
Info: The HTTP secure server has been already started. (switch echo information)
Warning: After configuring the source interface or source address, the listening socket will be created. (switch echo information)< a i=8> [HUAWEI]http server enable Info: The HTTP server has been already started. (switch echo information) Warning: After configuring the source interface or source address, the listening socket will be created. (switch echo information)
3. Configure Web user
[Huawei]aaa
[Huawei-aaa]local-user admin password cipher bjmut.com (admin after local-user is the username, bjmut.com after cipher is the password, use this account and password to log in)
info: A new user added (switch Echo information)
[Huawei-aaa] local-user admin service-type http telnet (the following two lines local The admin after -user needs to enter the user name configured in the previous line)
Info: The cipher password has been changed to an irreversible-cipher password.
Warning: The user access modes include Telnet, FTP, or HTTP, so security risks exist.
Info: After changing the rights (including the password, access type, FTP directory, HTTP directory, and level) of a local user, the rights of users already online do not change. The change takes effect to users who go online after the change. (switch echo information)
(local-user xxx service-type Note on the command: If you need to use this account as the user name for multiple login methods, you need to add multiple login services after service-type. For example, if you use this account for telnet, http, and console login at the same time: local-user huawei service-type http telnet terminal)
[Huawei-aaa]local-user admin privilege level 15 (Configure login account permission level, 15 is the highest level)
Warning: This operation may affect online users, are you sure to change the user privilege level?[Y/N] (switch echo information) a>
Error: Please choose 'YES' or 'NO' first before pressing 'Enter'. [Y/N]:y Info: Succeeded in setting the source interface of the HTTP server to Vlanif1. (switch echo information) Warning: HTTP is not a secure protocol, and it is recommended to use HTTPS.< /span> Info: Succeeded in starting the HTTP secure server. (switch echo information)y Warning: The operation will reboot the HTTP server. Continue? [Y/N]:http server-source -i Vlanif 1 [HUAWEI] 4. Configure the specified HTTP/HTTPS server Source interface ` The tentative address of this operation manual is 192.168.1.253 255.255.255.0 Note: X.X.X.X X.X.X.X vlanif1 is the switch management address and is set according to the on-site situation. ip address X.X.X.X X.X.X.X [HUAWEI-Vlanif1]interface vlanif 1 [Huawei] After the Web configuration is completed, you need to configure a management IP for the switch. The following is an example of configuring the IP for vlanif1:
3. Configure the management IP