RIP experiment

The purpose of the experiment: the whole network can communicate with each other (pc 0 ping pc 1 can communicate)
as shown in the following experimental topology;

1. First configure ip and gateway 2 for pc0 , and

configure ip address for gi0/0 gi0/1 of router 0

3. Interface for router1 Next, configure the corresponding ip address

4. Configure the corresponding ip address 5 for the Gig0/0 Gig0/1 interface of router 2, and configure the corresponding ip address 6

for the Gig0/0 Gig 0/1 interface of router 3. Configure the corresponding ip address

for pc1. Gateway and ip address

The next step is to configure the rip protocol

        分别在路由器0 1 2 3 中 配置 这样的三条命令就可以搞定全网通。如下图
         ![](http://i2.51cto.com/images/blog/201805/02/4d91df8c70b61a6eb4fa62b22c553c9f.jpg?x-oss-process=image/watermark,size_16,text_QDUxQ1RP5Y2a5a6i,color_FFFFFF,t_100,g_se,x_10,y_10,shadow_90,type_ZmFuZ3poZW5naGVpdGk=)