**Ubuntu20.04安装教程**
1. Install VMware 6
First click on the New Virtual Machine Wizard, pop out of the interface as shown in the figure, and click Next
2. At this step, you must choose to install the operating system later, (as shown in the figure)
3. On the guest operating system, select the linux (L) version of Ubuntu 64-bit as shown in figure
3. The name of the virtual machine is written by yourself, and the system is recommended At the beginning, it is recommended to use a separate folder for identification and storage location, which is convenient.
5. The designated disk capacity is recommended to be 200G for later partitioning. Choose to store the virtual disk as a single file
. 6. Click Next and click Finish.
7. Edit virtual machine settings , Select the line mirror image
that has been downloaded 8. It should be noted that. The data of the virtual network editor can be set once, and other systems can be subsequently installed. No setting is required.
9. The above settings are completed, and then the installation starts. Enter the installation interface.
The default language for this selection is English. Press the Enter key.
10, this interface selects the second option: continue without updating.
11. The default DONE directly returns The next step of the car
4. The three interfaces continue to default to done and press Enter.
13. Since the hard disk needs to be manually set, press the space bar to select this in the Custom storage layout, and press Done in the next step.
14. Go to the disk interface to select and press enter. Add option
15 appears , and the hard disk size is set as shown in the figure
Note that the date is provided as FIG.
16. Next done to set up the account interface is provided to set their own account and password
select Done 17. After the setting, display installation (this step will be relatively long time, do not need to worry _ )
18 , After the installation is complete, select reboot to restart the system
thanks for watching! !
Supplement the last step