| HP 288 Pro G6 is a commercial desktop computer, using Intel 10th generation CPU, pre-installed win10 system, but win10 system still has problems in terms of stability and user experience, so many users and friends want to change win10 to win7 system. However, because the HP 288 Pro G6 desktop computer adopts UEFI mode, you must set the BIOS to disable secure boot and modify the hard disk mode support to modify the win7 system, and the usb3.1 cannot be used during the installation process. If you want to use the new win7 model, then HP 288 Pro G6 How to change the desktop from win10 to win7? Here is a tutorial on how to change the HP 288Pro G6 desktop from win10 to win7 and bios settings!
The detailed operation steps of HP 288 Pro G6 desktop computer win10 to win7 system are as follows:
1. Preparations before installation
1. Transfer all important files of the hard disk (files may be lost when changing partitions)
2. Prepare an 8G U disk: U Disk boot disk creation tool (PE features: 1. There is no boot disk bundled with any software. 2. Support PE automatic repair UEFI+GPT boot. 3. Support LEGACY/UEFI dual boot. 4. One-key installation and automatic injection of usb3.0 (And nvme driver)
3. Win7 image download supporting intel 10th generation cpu: HP WIN7 new model image download (new model 1, integrated USB3.0/us3.1 driver, to solve the problem that the USB device cannot be recognized during the installation process. 2 , Integrate Intel 10th generation set display uhd 630 driver. 3. Integrate nvme solid state hard drive to solve 0x0000007b blue screen)
HP 288 Pro G6 desktop win10 to win7 system considerations:
1. Currently HP 288 Pro G6 desktop does not support modifying legacy legacy Mode to install win7 system, can only use uefi boot, uefi boot only supports 64-bit operating system.
2. If it is a dual hard disk, then we need to change the solid state hard disk partition to guid (gpt partition), and the mechanical hard disk does not need to be partitioned. If both hard disks are partitioned as guid, (note: adjust the solid state disk as the first boot item, the first The word “startup item” is generally: windows boot manager).
3. Note that there are dual hard disks. If the secondary disk has esp msr and other recovery partitions, you must remember to kill these partitions from the secondary disk and directly select the fast partition of the master disk, and the esp msr partition will appear. install the system.
Second, HP 288 Pro G6 desktop win10 to change the BIOS setting steps of win7 system (an important step to install the WIN7 system) 2020 HP new bios
1. First, when the computer restarts or starts up, press the startup shortcut key "F10" to enter the BIOS settings Interface, after entering the interface, switch to the "Configuration" page, find "SATA Emulation" and change the hard disk mode to "AHCI", as shown in the figure; 
2. Next, switch to the "Startup Options" interface, find "Safe Startup Mode", set it to "Disable", and turn off Safe Startup, as shown in the figure; 
3. After setting to turn off the secure boot, it is recommended to click "Clear all secure boot keys" to clear it again (Note: If it is not cleared, the computer will prompt "Enter number + Enter" after the computer is turned on), as shown in the figure; 
5. After the above settings are completed, press the F10 key to save and restart the computer, insert the U disk startup disk that has been made, and press the "ESC" key repeatedly when the computer restarts, and then press F9 to call up the startup management dialog box, select with The U disk starting with uefi enters the pe interface, as shown in the figure; 
3. Steps to change HP 288 Pro G6 desktop win10 to win7 system partition (HP 288 Pro G6 desktop win10 to change win7 system must use GPT partition) It is recommended to quickly partition and select guid to repartition.
1. Select U disk boot disk to enter PE, Run the "DiskGenius" partition tool on the desktop, click "hard disk" in the menu bar, select "convert partition table type to guid format", and then save the changes, as shown in the figure below;
2. Then select the hard disk to be partitioned, and click "Quick Partition" above, as shown in the figure below; 
3. In the pop-up "Quick Partition" interface, here we choose the type of partition GUID and the number and size of the partition. (Note: It is generally recommended that the size of the C drive is larger than 60G, and then pay attention to 4K if it is a solid state drive. Alignment) as shown in the figure below; 
4. After the partition is completed, you can see "ESP and MSR partition" represents the completion of the GPT partition, as shown in the figure below; 
Fourth, HP 288 Pro G6 desktop win10 to change the win7 system step
1. Run the "Black Cloud One-click Reinstall System" tool on the desktop, and then first click Browse, and find the iso or gho file of the ghost version we downloaded on the U disk. Take the c drive as the system disk, install the win7 system in the c drive, click OK, (Note: if it is a dual hard drive, we must remember that it may not be the C drive, we choose the drive letter of the system you want to install according to the situation) Shown
2. After clicking Start, wait for the GHO installation program to be released, and the computer will automatically restart the computer.
3. After downloading, unplug the U disk directly, wait patiently for the completion of the system deployment, and then change the win7 system. .
Note: If the driver is incomplete after installation, you can enter the desktop and choose to download the " Driver President " to complete the driver.
The above is the article about HP 288ProG6 desktop win10 to win7 system and bios settings [support 10th generation cpu] |