Laboratory equipment management standards: daily maintenance is a common method to ensure the stability and reliability of equipment values. Especially for large instruments and equipment, attention should be paid to dust, moisture, mildew, and sun protection. Corresponding effective measures must be taken to ensure that the instrument is not damaged by external factors. Instruments and equipment are very important experimental resources. The custody of instruments and equipment is very important, so there must be a special person in charge, and the classification of equipment and instruments must be done. The details include the following seven points:
1. Check whether there is any damage when receiving and returning the instrument, and report the damage immediately and repair it in time.
2. The maintenance and maintenance of all kinds of instruments must be done carefully, and the test instruments must be managed by special personnel.
3. The laboratory staff is responsible for the daily storage of the instrument.
4. The precision instruments should be classified, and each instrument should be calibrated and tested regularly.
5. Make a record of the use, movement and verification of various instruments.
6. No equipment can be borrowed without normal procedures.
7. The instrument should be stored in a standardized manner and kept clean and tidy.
Maintenance of laboratory equipment:
The daily maintenance of equipment is a common method to ensure the stable and reliable value of equipment. Especially for large instruments and equipment, attention should be paid to dust, moisture, mildew, and sun protection. Corresponding effective measures must be taken to ensure that the instrument is not damaged by external factors. For the maintenance of equipment and equipment, mainly the following 5 points:
1. Equipment that is maintained on a periodic basis must be maintained or repaired in time when it is due, and the use time cannot be extended at will.
2. Before using the instrument, the experimenter should be familiar with its performance, principle and operating procedures, and illegal operation is strictly prohibited.
3. Non-metering testing or maintenance personnel are not allowed to disassemble or adjust mobile instruments at will.
4. Non-experimental personnel are not allowed to use the instrument.
5. In addition to periodic maintenance, the laboratory personnel should also check the condition of the equipment from time to time. If they find abnormal equipment, they should be repaired in time.
Periodic verification of equipment:
When product quality equipment is used for a certain period of time, in order to ensure the accuracy and traceability of product quality inspection equipment, it is necessary to organize various user departments to make traceability of various testing parameters for product quality inspection equipment and testing items in a planned way. Evaluation of measurement and uncertainty values or periodic verification to be calibrated.
1. Newly purchased instruments and equipment must be checked before they are put into storage, and instruments with expired inventory must be re-verified before they can be used.
2. The instrument and equipment must establish and record the maintenance and verification cycle schedule.
3. All kinds of instruments and equipment can only be used after being verified by the person in charge of the laboratory (technical person in charge) in cooperation with the verification personnel, and the conformity mark shall be affixed to the obvious position of the instrument.
4. All instruments and equipment that are inaccurate or without a certificate are prohibited from being used.
In short, the management of equipment and equipment is an important part of laboratory work. It is a highly comprehensive task, and it is also a very meticulous and cumbersome work. Only by earnestly doing every work in the management of product quality inspection equipment can we Effectively grasp the normal operation of experimental equipment.