OSPF deployment
OSPF graphic
text notes the following
experimental set up
experimental objectives: to achieve full OSPF network interoperability
test environment: The device is recommended to change the name of
the same network interworking
five AR2220 routers
area: backbone area area0
Experimental configuration OSPF standard code (and so on) to
create process 1, OSPF RID (router id) is 1.1.1.1
[AR1]ospf 1 router-id 1.1.1.1
[AR1-ospf-1]
Create area 0 (backbone) Area)
[AR1-ospf-1]area 0
[AR1-ospf-1-area-0.0.0.0]
In the area0 area, the interface declaration format IP address that belongs to area0 is declared inverse mask
[AR1-ospf-1-area-0.0. 0.0]network 12.0.0.0 0.0.0.255
[AR1-ospf-1-area-0.0.0.0]
OSPF command
1. View neighbor table
DISP OSPF PEER BRIEF
2. View LSDB
DISP OSPF LSDB
Three, view the routing table
disp ip routing-table
Fourth, check the routing table
disp ip routing-table protocol OSPF generated by OSPF
5. Restart the OSPF process
RESET OSPF PROCESS
OSPF priority change six
intake ports
OSPF DR_PRIORITY 0