Step 1 Vlan, Trunk, Eth-Trunk configuration
Step 2 MSTP configuration
Step 3 VRRP configuration
Step 4 BFD and VRRP linkage configuration
Step 5 ospf configuration
Step 6 DHCP relay configuration
Step 7 Telnet remote configuration
Huawei, H3C, and Cisco simulators will be shared with everyone so that everyone can learn together.
Link: https://pan.baidu.com/s/1M4HJeOoCJfbaN7eem5PogA
Extraction code: faty
All network devices are fully configured:
HX_SW1 complete configuration :
<HX_SW1>sys
Enter system view, return user view with Ctrl+Z.
[HX_SW1]dis with
#
sysname HX_SW1
#
undo info-center enable
#
vlan batch 10 20 30 40 50 200 800
#
stp instance 1 root primary
stp instance 2 root secondary
#
cluster enable
ntdp enable
ndp enable
#
undo nap slave enable
#
drop illegal-mac alarm
#
dhcp enable
#
diffserv domain default
#
stp region-configuration
region-name faty
revision-level 1
instance 1 vlan 10 20 50
instance 2 vlan 30 40
active region-configuration
#
bfd
#
drop-profile default
#
aaa
authentication-scheme default
authorization-scheme default
accounting-scheme default
domain default
domain default_admin
local-user admin password cipher %O'KCYR90a)NZPO3JBXBHA!!
local-user admin privilege level 15
local-user admin service-type telnet
#
interface Vlanif1
#
interface Vlanif10
ip address 192.168.10.253 255.255.255.0
vrrp vrid 10 virtual-ip 192.168.10.1
vrrp vrid 10 priority 120
vrrp vrid 10 track interface GigabitEthernet0/0/3
vrrp vrid 10 track bfd-session session-name 1
dhcp select relay
dhcp relay server-ip 192.168.50.100
#
interface Vlanif20
ip address 192.168.20.253 255.255.255.0
vrrp vrid 20 virtual-ip 192.168.20.1
vrrp vrid 20 priority 120
vrrp vrid 20 track interface GigabitEthernet0/0/3
vrrp vrid 20 track bfd-session session-name 1
dhcp select relay
dhcp relay server-ip 192.168.50.100
#
interface Vlanif30
ip address 192.168.30.253 255.255.255.0
vrrp vrid 30 virtual-ip 192.168.30.1
dhcp select relay
dhcp relay server-ip 192.168.50.100
#
interface Vlanif40
ip address 192.168.40.253 255.255.255.0
vrrp vrid 40 virtual-ip 192.168.40.1
dhcp select relay
dhcp relay server-ip 192.168.50.100
#
interface Vlanif50
ip address 192.168.50.253 255.255.255.0
vrrp vrid 50 virtual-ip 192.168.50.1
vrrp vrid 50 priority 120
vrrp vrid 50 track interface GigabitEthernet0/0/2
vrrp vrid 50 track bfd-session session-name 1
dhcp select relay
dhcp relay server-ip 192.168.50.100
#
interface Vlanif200
ip address 192.168.200.253 255.255.255.0
#
interface Vlanif800
ip address 192.168.12.2 255.255.255.0
#
interface MEth0/0/1
#
interface Eth-Trunk2
port link-type trunk
port trunk allow-pass vlan 2 to 4094
mode lacp-static
#
interface GigabitEthernet0/0/1
port link-type access
port default vlan 800
#
interface GigabitEthernet0/0/2
port link-type trunk
port trunk allow-pass vlan 50 200
#
interface GigabitEthernet0/0/3
port link-type trunk
port trunk allow-pass vlan 10 20 200
#
interface GigabitEthernet0/0/4
port link-type trunk
port trunk allow-pass vlan 30 40 200
#
interface GigabitEthernet0/0/5
eth-trunk 2
#
interface GigabitEthernet0/0/6
eth-trunk 2
#
interface GigabitEthernet0/0/7
#
interface GigabitEthernet0/0/8
#
interface GigabitEthernet0/0/9
#
interface GigabitEthernet0/0/10
#
interface GigabitEthernet0/0/11
#
interface GigabitEthernet0/0/12
#
interface GigabitEthernet0/0/13
#
interface GigabitEthernet0/0/14
#
interface GigabitEthernet0/0/15
#
interface GigabitEthernet0/0/16
#
interface GigabitEthernet0/0/17
#
interface GigabitEthernet0/0/18
#
interface GigabitEthernet0/0/19
#
interface GigabitEthernet0/0/20
#
interface GigabitEthernet0/0/21
#
interface GigabitEthernet0/0/22
#
interface GigabitEthernet0/0/23
#
interface GigabitEthernet0/0/24
#
interface NULL0
#
bfd 1 bind peer-ip 192.168.12.1 source-ip 192.168.12.2 auto
commit
#
ospf 1
area 0.0.0.0
network 192.168.10.0 0.0.0.255
network 192.168.20.0 0.0.0.255
network 192.168.30.0 0.0.0.255
network 192.168.40.0 0.0.0.255
network 192.168.50.0 0.0.0.255
network 192.168.12.0 0.0.0.255
network 192.168.200.0 0.0.0.255
#
user-interface con 0
user-interface vty 0 4
authentication-mode aaa
user privilege level 15
#
Return
HX_SW2 complete configuration
<HX_SW2>system-view
Enter system view, return user view with Ctrl+Z.
[HX_SW2]dis with
#
sysname HX_SW2
#
undo info-center enable
#
vlan batch 10 20 30 40 50 200 801
#
stp instance 1 root secondary
stp instance 2 root primary
#
cluster enable
ntdp enable
ndp enable
#
undo nap slave enable
#
drop illegal-mac alarm
#
dhcp enable
#
diffserv domain default
#
stp region-configuration
region-name faty
revision-level 1
instance 1 vlan 10 20 50
instance 2 vlan 30 40
active region-configuration
#
bfd
#
drop-profile default
#
aaa
authentication-scheme default
authorization-scheme default
accounting-scheme default
domain default
domain default_admin
local-user admin password cipher %O'KCYR90a)NZPO3JBXBHA!!
local-user admin privilege level 15
local-user admin service-type telnet
#
interface Vlanif1
#
interface Vlanif10
ip address 192.168.10.254 255.255.255.0
vrrp vrid 10 virtual-ip 192.168.10.1
dhcp select relay
dhcp relay server-ip 192.168.50.100
#
interface Vlanif20
ip address 192.168.20.254 255.255.255.0
vrrp vrid 20 virtual-ip 192.168.20.1
dhcp select relay
dhcp relay server-ip 192.168.50.100
#
interface Vlanif30
ip address 192.168.30.254 255.255.255.0
vrrp vrid 30 virtual-ip 192.168.30.1
vrrp vrid 30 priority 120
vrrp vrid 30 track interface GigabitEthernet0/0/4
vrrp vrid 30 track bfd-session session-name 2
dhcp select relay
dhcp relay server-ip 192.168.50.100
#
interface Vlanif40
ip address 192.168.40.254 255.255.255.0
vrrp vrid 40 virtual-ip 192.168.40.1
vrrp vrid 40 priority 120
vrrp vrid 40 track interface GigabitEthernet0/0/4
vrrp vrid 40 track bfd-session session-name 2
dhcp select relay
dhcp relay server-ip 192.168.50.100
#
interface Vlanif50
ip address 192.168.50.254 255.255.255.0
vrrp vrid 50 virtual-ip 192.168.50.1
dhcp select relay
dhcp relay server-ip 192.168.50.100
#
interface Vlanif200
ip address 192.168.200.254 255.255.255.0
#
interface Vlanif801
ip address 192.168.23.2 255.255.255.0
#
interface MEth0/0/1
#
interface Eth-Trunk2
port link-type trunk
port trunk allow-pass vlan 2 to 4094
mode lacp-static
#
interface GigabitEthernet0/0/1
port link-type trunk
port trunk allow-pass vlan 50 200
#
interface GigabitEthernet0/0/2
port link-type access
port default vlan 801
#
interface GigabitEthernet0/0/3
port link-type trunk
port trunk allow-pass vlan 10 20 200
#
interface GigabitEthernet0/0/4
port link-type trunk
port trunk allow-pass vlan 2 to 4094
#
interface GigabitEthernet0/0/5
eth-trunk 2
#
interface GigabitEthernet0/0/6
eth-trunk 2
#
interface GigabitEthernet0/0/7
#
interface GigabitEthernet0/0/8
#
interface GigabitEthernet0/0/9
#
interface GigabitEthernet0/0/10
#
interface GigabitEthernet0/0/11
#
interface GigabitEthernet0/0/12
#
interface GigabitEthernet0/0/13
#
interface GigabitEthernet0/0/14
#
interface GigabitEthernet0/0/15
#
interface GigabitEthernet0/0/16
#
interface GigabitEthernet0/0/17
#
interface GigabitEthernet0/0/18
#
interface GigabitEthernet0/0/19
#
interface GigabitEthernet0/0/20
#
interface GigabitEthernet0/0/21
#
interface GigabitEthernet0/0/22
#
interface GigabitEthernet0/0/23
#
interface GigabitEthernet0/0/24
#
interface NULL0
#
bfd 2 bind peer-ip 192.168.23.1 source-ip 192.168.23.2 auto
commit
#
ospf 1
area 0.0.0.0
network 192.168.10.0 0.0.0.255
network 192.168.20.0 0.0.0.255
network 192.168.30.0 0.0.0.255
network 192.168.40.0 0.0.0.255
network 192.168.50.0 0.0.0.255
network 192.168.23.0 0.0.0.255
network 192.168.200.0 0.0.0.255
#
user-interface con 0
user-interface vty 0 4
authentication-mode aaa
user privilege level 15
#
Return
HJ_SW3 configuration :
<HJ_SW3>system-view
Enter system view, return user view with Ctrl+Z.
[HJ_SW3]dis with
#
sysname HJ_SW3
#
undo info-center enable
#
vlan batch 10 20 30 40 50 200
#
cluster enable
ntdp enable
ndp enable
#
undo nap slave enable
#
drop illegal-mac alarm
#
diffserv domain default
#
stp region-configuration
region-name faty
revision-level 1
instance 1 vlan 10 20 50
instance 2 vlan 30 40
active region-configuration
#
drop-profile default
#
aaa
authentication-scheme default
authorization-scheme default
accounting-scheme default
domain default
domain default_admin
local-user admin password cipher %O'KCYR90a)NZPO3JBXBHA!!
local-user admin privilege level 15
local-user admin service-type telnet
#
interface Vlanif1
#
interface Vlanif200
ip address 192.168.200.30 255.255.255.0
#
interface MEth0/0/1
#
interface Eth-Trunk1
port link-type trunk
port trunk allow-pass vlan 20 200
mode lacp-static
#
interface GigabitEthernet0/0/1
port link-type trunk
port trunk allow-pass vlan 10 200
#
interface GigabitEthernet0/0/2
eth-trunk 1
#
interface GigabitEthernet0/0/3
port link-type trunk
undo port trunk allow-pass vlan 1
port trunk allow-pass vlan 10 20 200
#
interface GigabitEthernet0/0/4
port link-type trunk
undo port trunk allow-pass vlan 1
port trunk allow-pass vlan 10 20 200
#
interface GigabitEthernet0/0/5
eth-trunk 1
#
interface GigabitEthernet0/0/6
#
interface GigabitEthernet0/0/7
#
interface GigabitEthernet0/0/8
#
interface GigabitEthernet0/0/9
#
interface GigabitEthernet0/0/10
#
interface GigabitEthernet0/0/11
#
interface GigabitEthernet0/0/12
#
interface GigabitEthernet0/0/13
#
interface GigabitEthernet0/0/14
#
interface GigabitEthernet0/0/15
#
interface GigabitEthernet0/0/16
#
interface GigabitEthernet0/0/17
#
interface GigabitEthernet0/0/18
#
interface GigabitEthernet0/0/19
#
interface GigabitEthernet0/0/20
#
interface GigabitEthernet0/0/21
#
interface GigabitEthernet0/0/22
#
interface GigabitEthernet0/0/23
#
interface GigabitEthernet0/0/24
#
interface NULL0
#
user-interface con 0
user-interface vty 0 4
authentication-mode aaa
user privilege level 15
#
Return
HJ_SW4 configuration
<HJ_SW4>system-view
Enter system view, return user view with Ctrl+Z.
[HJ_SW4]dis with
#
sysname HJ_SW4
#
undo info-center enable
#
vlan batch 10 20 30 40 50 200
#
cluster enable
ntdp enable
ndp enable
#
undo nap slave enable
#
drop illegal-mac alarm
#
diffserv domain default
#
stp region-configuration
region-name faty
revision-level 1
instance 1 vlan 10 20 50
instance 2 vlan 30 40
active region-configuration
#
drop-profile default
#
aaa
authentication-scheme default
authorization-scheme default
accounting-scheme default
domain default
domain default_admin
local-user admin password cipher %O'KCYR90a)NZPO3JBXBHA!!
local-user admin privilege level 15
local-user admin service-type telnet
#
interface Vlanif1
#
interface Vlanif200
ip address 192.168.200.40 255.255.255.0
#
interface MEth0/0/1
#
interface GigabitEthernet0/0/1
port link-type trunk
port trunk allow-pass vlan 30 200
#
interface GigabitEthernet0/0/2
port link-type trunk
port trunk allow-pass vlan 40 200
#
interface GigabitEthernet0/0/3
port link-type trunk
port trunk allow-pass vlan 30 40 200
#
interface GigabitEthernet0/0/4
port link-type trunk
port trunk allow-pass vlan 30 40 200
#
interface GigabitEthernet0/0/5
#
interface GigabitEthernet0/0/6
#
interface GigabitEthernet0/0/7
#
interface GigabitEthernet0/0/8
#
interface GigabitEthernet0/0/9
#
interface GigabitEthernet0/0/10
#
interface GigabitEthernet0/0/11
#
interface GigabitEthernet0/0/12
#
interface GigabitEthernet0/0/13
#
interface GigabitEthernet0/0/14
#
interface GigabitEthernet0/0/15
#
interface GigabitEthernet0/0/16
#
interface GigabitEthernet0/0/17
#
interface GigabitEthernet0/0/18
#
interface GigabitEthernet0/0/19
#
interface GigabitEthernet0/0/20
#
interface GigabitEthernet0/0/21
#
interface GigabitEthernet0/0/22
#
interface GigabitEthernet0/0/23
#
interface GigabitEthernet0/0/24
#
interface NULL0
#
user-interface con 0
user-interface vty 0 4
authentication-mode aaa
user privilege level 15
#
Return
JR_SW5 configuration:
<JR_SW5>sys
Enter system view, return user view with Ctrl+Z.
[JR_SW5]dis with
#
sysname JR_SW5
#
undo info-center enable
#
vlan batch 10 20 30 40 50 200
#
cluster enable
ntdp enable
ndp enable
#
undo nap slave enable
#
drop illegal-mac alarm
#
diffserv domain default
#
drop-profile default
#
aaa
authentication-scheme default
authorization-scheme default
accounting-scheme default
domain default
domain default_admin
local-user admin password cipher %O'KCYR90a)NZPO3JBXBHA!!
local-user admin privilege level 15
local-user admin service-type telnet
#
interface Vlanif1
#
interface Vlanif200
ip address 192.168.200.50 255.255.255.0
#
interface MEth0/0/1
#
interface Ethernet0/0/1
port link-type trunk
port trunk allow-pass vlan 10 200
#
interface Ethernet0/0/2
port link-type access
port default vlan 10
#
interface Ethernet0/0/3
#
interface Ethernet0/0/4
#
interface Ethernet0/0/5
#
interface Ethernet0/0/6
#
interface Ethernet0/0/7
#
interface Ethernet0/0/8
#
interface Ethernet0/0/9
#
interface Ethernet0/0/10
#
interface Ethernet0/0/11
#
interface Ethernet0/0/12
#
interface Ethernet0/0/13
#
interface Ethernet0/0/14
#
interface Ethernet0/0/15
#
interface Ethernet0/0/16
#
interface Ethernet0/0/17
#
interface Ethernet0/0/18
#
interface Ethernet0/0/19
#
interface Ethernet0/0/20
#
interface Ethernet0/0/21
#
interface Ethernet0/0/22
#
interface GigabitEthernet0/0/1
#
interface GigabitEthernet0/0/2
#
interface NULL0
#
user-interface con 0
user-interface vty 0 4
authentication-mode aaa
user privilege level 15
#
Return
JR_SW6 configuration
<JR_SW6>system-view
Enter system view, return user view with Ctrl+Z.
[JR_SW6]dis with
#
sysname JR_SW6
#
undo info-center enable
#
vlan batch 10 20 30 40 50 200
#
cluster enable
ntdp enable
ndp enable
#
undo nap slave enable
#
drop illegal-mac alarm
#
diffserv domain default
#
drop-profile default
#
aaa
authentication-scheme default
authorization-scheme default
accounting-scheme default
domain default
domain default_admin
local-user admin password cipher %O'KCYR90a)NZPO3JBXBHA!!
local-user admin privilege level 15
local-user admin service-type telnet
#
interface Vlanif1
#
interface Vlanif200
ip address 192.168.200.60 255.255.255.0
#
interface MEth0/0/1
#
interface Eth-Trunk1
port link-type trunk
port trunk allow-pass vlan 20 200
mode lacp-static
#
interface Ethernet0/0/1
port link-type access
port default vlan 20
#
interface Ethernet0/0/2
eth-trunk 1
#
interface Ethernet0/0/3
eth-trunk 1
#
interface Ethernet0/0/4
#
interface Ethernet0/0/5
#
interface Ethernet0/0/6
#
interface Ethernet0/0/7
#
interface Ethernet0/0/8
#
interface Ethernet0/0/9
#
interface Ethernet0/0/10
#
interface Ethernet0/0/11
#
interface Ethernet0/0/12
#
interface Ethernet0/0/13
#
interface Ethernet0/0/14
#
interface Ethernet0/0/15
#
interface Ethernet0/0/16
#
interface Ethernet0/0/17
#
interface Ethernet0/0/18
#
interface Ethernet0/0/19
#
interface Ethernet0/0/20
#
interface Ethernet0/0/21
#
interface Ethernet0/0/22
#
interface GigabitEthernet0/0/1
#
interface GigabitEthernet0/0/2
#
interface NULL0
#
user-interface con 0
user-interface vty 0 4
authentication-mode aaa
user privilege level 15
#
Return
JR_SW7 configuration:
<JR_SW7>system-view
Enter system view, return user view with Ctrl+Z.
[JR_SW7]this cu
#
sysname JR_SW7
#
undo info-center enable
#
vlan batch 10 20 30 40 50 200
#
cluster enable
ntdp enable
ndp enable
#
undo nap slave enable
#
drop illegal-mac alarm
#
diffserv domain default
#
drop-profile default
#
aaa
authentication-scheme default
authorization-scheme default
accounting-scheme default
domain default
domain default_admin
local-user admin password cipher %O'KCYR90a)NZPO3JBXBHA!!
local-user admin privilege level 15
local-user admin service-type telnet
#
interface Vlanif1
#
interface Vlanif200
ip address 192.168.200.70 255.255.255.0
#
interface MEth0/0/1
#
interface Ethernet0/0/1
port link-type trunk
port trunk allow-pass vlan 30 200
#
interface Ethernet0/0/2
port link-type access
port default vlan 30
#
interface Ethernet0/0/3
#
interface Ethernet0/0/4
#
interface Ethernet0/0/5
#
interface Ethernet0/0/6
#
interface Ethernet0/0/7
#
interface Ethernet0/0/8
#
interface Ethernet0/0/9
#
interface Ethernet0/0/10
#
interface Ethernet0/0/11
#
interface Ethernet0/0/12
#
interface Ethernet0/0/13
#
interface Ethernet0/0/14
#
interface Ethernet0/0/15
#
interface Ethernet0/0/16
#
interface Ethernet0/0/17
#
interface Ethernet0/0/18
#
interface Ethernet0/0/19
#
interface Ethernet0/0/20
#
interface Ethernet0/0/21
#
interface Ethernet0/0/22
#
interface GigabitEthernet0/0/1
#
interface GigabitEthernet0/0/2
#
interface NULL0
#
user-interface con 0
user-interface vty 0 4
authentication-mode aaa
user privilege level 15
#
Return
JR_SW8 configuration :
<JR_SW8>system-view
Enter system view, return user view with Ctrl+Z.
[JR_SW8]dis with
#
sysname JR_SW8
#
undo info-center enable
#
vlan batch 10 20 30 40 50 200
#
cluster enable
ntdp enable
ndp enable
#
undo nap slave enable
#
drop illegal-mac alarm
#
diffserv domain default
#
drop-profile default
#
aaa
authentication-scheme default
authorization-scheme default
accounting-scheme default
domain default
domain default_admin
local-user admin password cipher %O'KCYR90a)NZPO3JBXBHA!!
local-user admin privilege level 15
local-user admin service-type telnet
#
interface Vlanif1
#
interface Vlanif200
ip address 192.168.200.80 255.255.255.0
#
interface MEth0/0/1
#
interface Ethernet0/0/1
port link-type access
port default vlan 40
#
interface Ethernet0/0/2
port link-type trunk
port trunk allow-pass vlan 40 200
#
interface Ethernet0/0/3
#
interface Ethernet0/0/4
#
interface Ethernet0/0/5
#
interface Ethernet0/0/6
#
interface Ethernet0/0/7
#
interface Ethernet0/0/8
#
interface Ethernet0/0/9
#
interface Ethernet0/0/10
#
interface Ethernet0/0/11
#
interface Ethernet0/0/12
#
interface Ethernet0/0/13
#
interface Ethernet0/0/14
#
interface Ethernet0/0/15
#
interface Ethernet0/0/16
#
interface Ethernet0/0/17
#
interface Ethernet0/0/18
#
interface Ethernet0/0/19
#
interface Ethernet0/0/20
#
interface Ethernet0/0/21
#
interface Ethernet0/0/22
#
interface GigabitEthernet0/0/1
#
interface GigabitEthernet0/0/2
#
interface NULL0
#
user-interface con 0
user-interface vty 0 4
authentication-mode aaa
user privilege level 15
#
Return
JR_SW9 configuration:
<JR_SW9>system-view
Enter system view, return user view with Ctrl+Z.
[JR_SW9]dis cu
#
sysname JR_SW9
#
undo info-center enable
#
vlan batch 10 20 30 40 50 200
#
cluster enable
ntdp enable
ndp enable
#
undo nap slave enable
#
drop illegal-mac alarm
#
diffserv domain default
#
stp region-configuration
region-name faty
revision-level 1
instance 1 vlan 10 20 50
instance 2 vlan 30 40
active region-configuration
#
drop-profile default
#
aaa
authentication-scheme default
authorization-scheme default
accounting-scheme default
domain default
domain default_admin
local-user admin password cipher %O'KCYR90a)NZPO3JBXBHA!!
local-user admin privilege level 15
local-user admin service-type telnet
#
interface Vlanif1
#
interface Vlanif200
ip address 192.168.200.90 255.255.255.0
#
interface MEth0/0/1
#
interface GigabitEthernet0/0/1
port link-type trunk
port trunk allow-pass vlan 50 200
#
interface GigabitEthernet0/0/2
port link-type trunk
port trunk allow-pass vlan 50 200
#
interface GigabitEthernet0/0/3
port link-type access
port default vlan 50
#
interface GigabitEthernet0/0/4
port link-type access
port default vlan 50
#
interface GigabitEthernet0/0/5
#
interface GigabitEthernet0/0/6
#
interface GigabitEthernet0/0/7
#
interface GigabitEthernet0/0/8
#
interface GigabitEthernet0/0/9
#
interface GigabitEthernet0/0/10
#
interface GigabitEthernet0/0/11
#
interface GigabitEthernet0/0/12
#
interface GigabitEthernet0/0/13
#
interface GigabitEthernet0/0/14
#
interface GigabitEthernet0/0/15
#
interface GigabitEthernet0/0/16
#
interface GigabitEthernet0/0/17
#
interface GigabitEthernet0/0/18
#
interface GigabitEthernet0/0/19
#
interface GigabitEthernet0/0/20
#
interface GigabitEthernet0/0/21
#
interface GigabitEthernet0/0/22
#
interface GigabitEthernet0/0/23
#
interface GigabitEthernet0/0/24
#
interface NULL0
#
user-interface con 0
user-interface vty 0 4
authentication-mode aaa
user privilege level 15
#
return
AR1 configuration:
<AR1>system-view
Enter system view, return user view with Ctrl+Z.
[AR1]dis with
[V200R003C00]
#
sysname AR1
#
snmp-agent local-engineid 800007DB03000000000000
snmp-agent
#
clock timezone China-Standard-Time minus 08:00:00
#
portal local-server load flash:/portalpage.zip
#
drop illegal-mac alarm
#
wlan ac-global carrier id other ac id 0
#
set cpu-usage threshold 80 restore 75
#
bfd
#
aaa
authentication-scheme default
authorization-scheme default
accounting-scheme default
domain default
domain default_admin
local-user admin password cipher %$%$e\fH=U&3QV<Ou`NLv":&3Ff`%$%$
local-user admin privilege level 15
local-user admin service-type telnet
#
firewall zone Local
priority 15
#
interface GigabitEthernet0/0/0
ip address 14.1.1.1 255.255.255.0
#
interface GigabitEthernet0/0/1
ip address 192.168.12.1 255.255.255.0
#
interface GigabitEthernet0/0/2
ip address 192.168.23.1 255.255.255.0
#
interface NULL0
#
bfd 1 bind peer-ip 192.168.12.2 source-ip 192.168.12.1 auto
commit
#
bfd 2 bind peer-ip 192.168.23.2 source-ip 192.168.23.1 auto
commit
#
ospf 1
area 0.0.0.0
network 14.1.1.0 0.0.0.255
network 192.168.12.0 0.0.0.255
network 192.168.23.0 0.0.0.255
#
user-interface con 0
authentication-mode password
user-interface vty 0 4
authentication-mode aaa
user privilege level 15
user-interface vty 16 20
#
wool and
#
Return
DHCP(AR2) configuration:
<dhcp>system-view
Enter system view, return user view with Ctrl+Z.
[dhcp]dis with
[V200R003C00]
#
sysname dhcp
#
snmp-agent local-engineid 800007DB03000000000000
snmp-agent
#
clock timezone China-Standard-Time minus 08:00:00
#
portal local-server load flash:/portalpage.zip
#
drop illegal-mac alarm
#
wlan ac-global carrier id other ac id 0
#
set cpu-usage threshold 80 restore 75
#
dhcp enable
#
ip pool vlan10
gateway-list 192.168.10.1
network 192.168.10.0 mask 255.255.255.0
excluded-ip-address 192.168.10.250 192.168.10.254
lease day 0 hour 8 minute 0
dns-list 114.114.114.114
#
ip pool vlan20
gateway-list 192.168.20.1
network 192.168.20.0 mask 255.255.255.0
excluded-ip-address 192.168.20.250 192.168.20.254
lease day 0 hour 8 minute 0
dns-list 114.114.114.114
#
ip pool vlan30
gateway-list 192.168.30.1
network 192.168.30.0 mask 255.255.255.0
excluded-ip-address 192.168.30.250 192.168.30.254
lease day 0 hour 8 minute 0
dns-list 114.114.114.114
#
ip pool vlan40
gateway-list 192.168.40.1
network 192.168.40.0 mask 255.255.255.0
excluded-ip-address 192.168.40.250 192.168.40.254
lease day 0 hour 8 minute 0
dns-list 114.114.114.114
#
ip pool vlan50
gateway-list 192.168.50.1
network 192.168.50.0 mask 255.255.255.0
excluded-ip-address 192.168.50.250 192.168.50.254
lease day 0 hour 8 minute 0
dns-list 114.114.114.114
#
aaa
authentication-scheme default
authorization-scheme default
accounting-scheme default
domain default
domain default_admin
local-user admin password cipher %$%$K8m.Nt84DZ}e#<0`8bmE3Uw}%$%$
local-user admin service-type http
#
firewall zone Local
priority 15
#
interface GigabitEthernet0/0/0
ip address 192.168.50.100 255.255.255.0
dhcp select global
#
interface GigabitEthernet0/0/1
#
interface GigabitEthernet0/0/2
#
interface NULL0
#
ip route-static 0.0.0.0 0.0.0.0 192.168.50.1
#
user-interface con 0
authentication-mode password
user-interface vty 0 4
user-interface vty 16 20
#
wool and
#
Return
Branch AR3 configuration:
<FZ_R3>system-view
Enter system view, return user view with Ctrl+Z.
[FZ_R3]dis with
[V200R003C00]
#
sysname FZ_R3
#
snmp-agent local-engineid 800007DB03000000000000
snmp-agent
#
clock timezone China-Standard-Time minus 08:00:00
#
portal local-server load flash:/portalpage.zip
#
drop illegal-mac alarm
#
wlan ac-global carrier id other ac id 0
#
set cpu-usage threshold 80 restore 75
#
aaa
authentication-scheme default
authorization-scheme default
accounting-scheme default
domain default
domain default_admin
local-user admin password cipher %$%$VmgH6,xbBEUDo(O6j]=/3FF[%$%$
local-user admin privilege level 15
local-user admin service-type telnet
#
firewall zone Local
priority 15
#
interface GigabitEthernet0/0/0
ip address 14.1.1.2 255.255.255.0
#
interface GigabitEthernet0/0/1
ip address 192.168.100.1 255.255.255.0
#
interface GigabitEthernet0/0/2
#
interface NULL0
#
ospf 1
area 0.0.0.0
network 14.1.1.0 0.0.0.255
network 192.168.100.0 0.0.0.255
#
user-interface con 0
authentication-mode password
user-interface vty 0 4
authentication-mode aaa
user privilege level 15
user-interface vty 16 20
#
wool and
#
return