Note: This information only for NF5270M5 + Windows Server 2012 R2, the installation does not try other versions, but should be able to learn from.
Installation reasons: the wave of NF5270M5 server NIC driver company purchased a problem (its system on the machine is cracked), re-installing the network card driver (can use driver genius look at the model of the card, and then download the corresponding drive or directly to the official website find the corresponding) either installation failed, suggesting that what is not Intel (R) network adapter, or the installation was successful, but the viewing device manager, did nothing changes, nearly wasted on the time of day in the NIC driver messed up. Helpless, forced things just happened.
Online tutorial for system installation tide of many, the official website also has a corresponding PDF, but for reference purposes only, and differ from the actual situation. Here is my own actual operation briefly about the process.
Step: floppy disk through the use of tools to create U-disk system, not much to say, note that the only point, U disk to be formatted as NTFS system (the second step can skip directly to the third step).
Step two: a variety of online document that is to enter the BIOS mode, and then set various MODE and reboot will go step by step on OK, No, make a good system boot disk plugged in, turned on, in the event of inspur logo when press F11 to enter the boot menu, then set the boot mode (select to boot from the U disk), then restart, wait for a while will find hope the system installation interface appears, select the type of system to install, and then agree to the license, the next step choose where you want to install, if the C drive appears, you can directly select the C drive, and then go on a fool (goes below the third step can be skipped). But my case is without any letter, online information that is good to install RAID drivers (specifically how to dress, mess, did not mind read on), RAID volumes to be created (the boot process prompted press Ctrl + I enter the RAID configuration interface), the interface found has created a good RAID0 Volum1, that I would creat a, save and exit the restart, or so, take the third step of it.
The third step: As shown below, it is good to make the contents of the disk file system, INSPUR RAID DRIVER this folder can be ignored (I add install RAID driver), double-click the setup.exe file purple arrow points, followed by step through the hole (the installation process has all the letter appears, select the C drive, will automatically restart once or twice).
Step 4: After the installation is complete, check the device manager, network card driver found the test show what core network adapters (like this name), or not as ah, from the official website of the wave (see a directory README) downloads Chipset patches and network card driver, and then double-click the driver file is, according to the installation process, the installation is successful, then enter the device Manager to view network adapter, Intel (R) Ethernet Connection X722 for 1GbE, nice.
