[Exam] sprint computer three network technology heavy and difficult exam sprint and problem-solving skills (f)
Chapter Six
This chapter explains the configuration of the switch, Series 65 to explain the configuration of the switch from Cisco 35 series and Cisco.
Set the system time
Example 1
the system time of a Catalyst 3548 switch is set at 18:10:35 on March 23, 2015, the following switches are properly configured ()
A) Switch Time SET-3548 # 23 is March, 2015 18:10:35
B) Switch Clock # SET-3548 18:10:35 23 is March, 2015
C) Switch Clock # 3548-SET catalog on Monday 23 is March, 2015 18:10:35
D) Switch Clock # 3548-SET Monday 3/23/2015 18:10 : 35
the answer : B
parsing : Remember two series configuration format can be.
2 example
the system time of a Catalyst 6500 switch is set to Monday in March 2015 at 18:10:35 on the 23rd, following the switch configuration is correct ()
A) Switch-6500> (enable) 18 is SET Time: catalog on Monday 3/23/2015 10:35
B) Switch-6500> (enable) SET Time 18:10:35 3/23/2015 catalog on Monday
C) Switch-6500> (enable) Time SET catalog on Monday 23/3/2015 18 is: 10:35
D) Switch-6500> (enable) the SET Clock catalog on Monday 3/23/2015 18:10:35
answer : B
parsing : Remember two series configuration format can be.
3 example
the system time of a Catalyst 3548 and changed to the Catalyst 6500 at 10:50:33 on March 14, 2016, correctly configure the following system time is set ()
The answer : C
parsing : Remember two series configuration format can be.
Device management IP address
Example 1
the system time of a Catalyst 6500 switch to Thursday in March 2014 at 10:37:50 on the 13th, the device management address to 219.75.208.254/24, the default route as 219.75.208.1, correct configuration switch is ()
The answer : B
parsing : None
Example 2
Device Management addresses a Catalyst 3548 switch is 137.189.11.73/24, address of the default route is 137.189.11.1, the following address properly configured for device management is ()
The answer : C
parsing : None
3 examples
of a Catalyst 6500 and a Catalyst 3548 switch device management addresses respectively 213.78.3.20/24,213.78.3.21/24, the default routing address is 213.78.3.1, these two switches following configuration is correct ( )
The answer : C
parsing : None
VTP switch configuration
Example 1
a 3548 Catalyst VTP domain name is cuhk, based on the switch ID number 131, named jxzx131 the VLAN, and delete the ID number 150, VLAN named lib150, the switch configuration is correct ()
answer : C
parsing : topic that need to create and delete vlan, so the only server and transparent mode; Cisco 35 series, delete vlan with no; we must pay attention to create vlan word order.
Example 2
a campus network has three Catalyst 6500, which Switch A requirements create and delete VLAN, VLAN configuration information and can automatically propagated to other switches in the local domain, Switch B requirements create and delete VLAN, but not learn nor broadcast configuration information of VLAN, Switch C are not allowed to create and delete VLAN. The following three VTP switch configuration, the right is ()
The answer : C
resolved : to determine the meaning of the questions A to server, B is transparent, C is the client, so rule out the option B and option D; and remember the same domain the domain name must be identical.
Example 3
as shown below, Catalyst 6500 3/1 and g0 / 1 Catalyst 3500 in the port operating mode VLAN trunk, and the port g0 / 1 used IEEE802.1Q protocol, and requests the transmission VLAN information VLAN1,2 37-42 but it does not allow the transmission of information VLAN3-36 correctly configure the following Catalyst6500 VLAN trunk is ()
the answer :
parsing : title requires the use of IEEE 802.1Q protocol should be dot1q, a options is isl, so option a error; in Cisco 65 series is not allowed VLAN with clear, except Cisco 35 series and used.
Example 4
shown in FIG g0 / 1 and 3/1 working port in the Catalyst Catalyst VLAN trunk mode and 3/1 Catalyst IEEE802.1Q protocol using port 6500, and requests the transmission VLAN1,2 VLAN information of 24-100 , correctly configured series Catalyst 3500 VLAN trunk is ()
the answer : B
parsing : title requires the use of IEEE 802.1Q protocol should be dot1q, a options is isl, so option a error; Cisco 35 series should be used except; D option, VLAN 1 to 100 should be expressed as vlan 1-100, with between - symbols.