As these are what not to say, come to tutorial, certainly know what they are, I have to follow the installation procedure step by step, I will try every step writes.
Disclaimer: If you have to place the pit, I will try to target a little obvious. Please see the tutorial carefully, because I did not look carefully because tutorials and step on the pit, and then that, because of the major online blog site I have seen, are relative to the current official website updated kali slightly out. Please see the tutorial carefully, looking small step on the pit! ! !
Built environment: VMware workstation 15.5 pro; Windows (build virtual machines should be used are win10.)
Kali
Mirror Direct official website to download on the line, download the following address:
Kali: Kali official website
into the download interface as per Figure in the red box
according to your configuration options, I was win10,64 bit, so we chose the first one. The point where the red line circled (because of possible official website updates, tutorials, other bloggers here's the point is not so). Wait for the download
the download is complete. (Could it be a little slow process.)
On the virtual machine, click Create a new virtual machine
Select Custom and click Next
and then click Next directly
point to install the operating system later, the next
choice of operating systems Linux, the default version of Ubuntu, click Next
number of processors to 2 (of course, can also be larger), not less otherwise, no guarantee can not go wrong, as far as possible with my setup, the next step
Note : memory to 4G, no less. Otherwise it will go wrong, I stepped on the pit. It can be quickly set up by the bar on the left. Next
election: using network address translation, the next step
choose the recommended ,, next
election recommended that, the next
election: Create a new virtual disk, the next step
on the Select All three arrows here referred to (as I used to it can), the next step
can change the path by browsing the best in the exclusive neighborhood a virtual machine's disk folder. (This is not so strict, you can own free)
to note here, and I do not have time to look at the tutorial carefully.
Must pay attention to the point custom hardware
follow the steps, select the location you download the image. Then close
and then click Finish after closing, will begin to create a virtual machine
is created, compare for errors.
Not finished, the next step, boot
the election first. Mouse hit enter into the virtual machine you can choose
then this is the
language selected Chinese (Simplified), then continue
selecting China, continue to
configure the keyboard to select American English, continue to
occur this. Wait for
the host name on kali on the line, continue to
the domain name can not fill is not directly point to continue
The new user name themselves free to fill, continue to
set a password on their own, continue to
use the entire disk, continue to
choose the only option, continue to
choose recommended for newbies continue to
choose 结束分区设定并将修改写入磁盘
to continue to
choose to continue to
appear on this page and wait for
direct point continue
continue wait,
then follow the prompts step, I picture is lost.
To continue, that is,
or so, over time, would appear this, he said, you can skip this step, do not believe him !! listen to me, point to continue,
then it will appear that the entire installation procedure interface, let him skip this step, never the other directly point to continue, also perform this step "select and install software", do not jump, do not jump, I jumped twice, and the results of it is
completed normally, but no picture when landing is so
this result is not what we want
it also continued to implement the wrong that step. Believe me, I stepped on that pit, so I dare say.
And then continue to wait. Emergence of such an interface
I am also white, do not understand anything, so I just choose one, choose the same suggestion to me, because the other I do not know, I can not guarantee that say get out, that I was their practice before, you can get the results we want. Point to continue
the download something a bit more, we recommend WiFi to download, because I could not even phone is hot, with a flow rate of 1.7 G, I, carefully chosen. I am very distressed. This period need to wait, wait, wait ......
then there was this ,,,,
Leave him alone, or choose to continue with this step, do not jump, do not jump. This step is followed by, until engage them so far (do not worry about this problem or starting again from scratch, because you download those files when executing this step, do not re-download Ming just load it, and soon, will not re-download , does not cost flow, nor dues time can be assured)
Centering playing a needle, to me here, would be finished, he gave me an error, let me jump. I do not jump, once again,
Then on the end,
there will be much faster,
wait for the process and put a process diagram, victory in front. Adhere to ah!
OK, finally to this step, select Yes, click Continue
select / dev / sda. ,,, Click Continue
To the end of this step, load quickly, insist on ......
end of the installation process here has been successful, to see what sub-sub-it, ha ha ha. First to keep the excitement, to say behind
to enter your own username and password during the installation process. Can be landed
came in to see what it was like
wow, too Neiss, and this time will be a long breath. Applaud for themselves.
Now I talk about when I set up the hardships, I am twelve class, eat lunch, the whole afternoon, then eat dinner and then come out quickly, and now I'm here blog wrote here, midnight a. Middle almost did not stop. So in the process of building, and so do not feel too long to give up, the persevering. Now the latest version of kali course not the same as the previous. Installation tutorial is also a headache, especially for beginners like me. In order to share this with my little step on some of the same white pit. OK, the other tomorrow. Xianshui!
OWASP drone to build
this is quite simple, not too complicated operation. Started
Step One: Download the virtual machine is still the official website to download OWASP drone official website
click on the download, then it will jump automatically download a compressed package. The drone is no new version of the old version, drone Well, that is a bunch of loopholes, no need to update.
Once downloaded, unzip the exclusive location of the virtual machine (under sub-category, a regular point).
Open Virtual Machine home page, click on the virtual machine
and the path you unpack drones to add in a virtual machine,
opening the unzipped folder will have this click Open on the line.
After opening directly is a virtual machine, it is
described in which a user name and password, open the virtual machine on the line.
Enter the username and password entered
to see, was already in, when the password is not see anything, I began to also confused, and why? Is it my keyboard with the matter? Then look for Baidu, is particularly simple reason, that is, you enter a password that can not see, just do not have the wrong password, the password input into the continuous fall, hit enter. See the figure
It will prompt us welcome. This is successfully entered.
Then enter dhclient eth0
re-acquire the virtual machine IP.
As the IP domain name into a browser to access, will appear the following page.
I used Google to access, because I see English more difficult, but also to translate it.
Here to build on the success of the drone, can carry out some routine operation, Baidu own.
Some problems arise VMware,
Just open the virtual machine when ready to build, and found something wrong, that I had a Chinese version into a full English, the beginning I did not take too much notice, directly built. Then failed, that step in the virtual machine, the virtual machine was found open. It prompts Unable to find brain******一堆我忘了是什么了
. I forgot to leave a map, to find a piece on Baidu,
you check Baidu, have said let's reload, before I win7 how to do, not heavy equipment, to then find a way, hard work pays off. I found an unknown big brother saw his reply on Baidu experience. I followed the operation on it. No reload.
He said the following about the operation.
1. Turn off the virtual machine program is not to say, according to the operation on the line.
2. Run as Administrator command line, you can search for cmd in the search box below
Then there is this
then operating on the line.
3. The third step is not demonstrated, there is a point to note, is about to repair, when finished it will look for a file. Name is vmnetBridge.dll
this if not find where you can use everything to find it, fast.
Call ...... finally finished, here, all the problems solved. Very happy, ha ha ha! ! ! !