INT0和INT1中断计数 PROTEUS 和51单片机教程（仿真文件+源代码）

功能：INT0和INT1中断计数，INT0和INT1分别计数和清零，也可以把两个连在一起计数

PROTEUS 和51单片机教程

程序的C语言代码如下：

/*
INT0与INT1中断计数
*/
#include<reg51.h>
typedef unsigned char uint8;
typedef unsigned int uint16;

sbit K3 = P3^4;
sbit K4 = P3^5;

void delay(uint16 x)
{
uint16 i,j;
for(i = x; i > 0; i --)
for(j = 114; j > 0; j --);
}

code uint8 LED_CODE[] = {0xC0,0xF9,0xA4,0xB0,0x99,0x92,0x82,0xF8,0x80,0x90,0xFF};

code uint8 Scan_BITs[]= {0x20,0x10,0x08,0x04,0x02,0x01};

uint8 Buffer_Counts[]={0,0,0,0,0,0};

uint16 Count_A=0, Count_B=0;

void Show_Counts()
{
uint8 i;
Buffer_Counts[2] = Count_A / 100;
Buffer_Counts[1] = Count_A % 100 /10;
Buffer_Counts[0] = Count_A % 10;
if(Buffer_Counts[2] == 0)
{
Buffer_Counts[2] = 10;
if(Buffer_Counts[1] == 0) Buffer_Counts[1] = 10;
}

Buffer_Counts[5] = Count_B / 100;
Buffer_Counts[4] = Count_B % 100 /10;
Buffer_Counts[3] = Count_B % 10;	
if(Buffer_Counts[5] == 0)
{
 	Buffer_Counts[5] = 10;
	if(Buffer_Counts[4]==0)	Buffer_Counts[4] = 10;
}
for(i = 0;i < 6;i ++)
{
	P0 = 0xFF;
 	P1 = Scan_BITs[i];
	P0 = LED_CODE[Buffer_Counts[i]];
	delay(2);
}

}

void main()
{
IP = 0x05;
IT0 = 1;
IT1 = 1;
IE = 0x85;
while(1)
{
if(K3 == 0) Count_A = 0;
if(K4 == 0) Count_B = 0;
Show_Counts();
}
}

void ISR0() interrupt 0
{
Count_A++;
}

void ISR1() interrupt 2
{
Count_B++;
}