注意:部分代码双引号中英文有问题,自己调整!
1.输入2个整数,求两数的平方和并输出。
#include <stdio.h>
main()
{ int a,b,s;
printf("please input a,b:\n");
scanf("%d%d",&a,&b);
s=a*a+b*b;
printf("the result is %d\n",s);
}
2. 输入一个圆半径(r)当r>=0时,计算并输出圆的面积和周长,否则,输出提示信息。
#include <stdio.h>
#define PI 3.14 <stdio.h>
main()
{ float r ,s , l;
printf("please input r:\n");
scanf("%f",&r);
if (r>=0)
{s=pi*r*r;
l=2*i*r ;
printf("the area is %f\n",s);
printf("the circumference is %f\n",l);}
else
printf("input error!\n");
}
3、函数y=f(x)可表示为:
2x+1 (x<0)
y= 0 (x=0)
2x-1 (x>0)
编程实现输入一个x值,输出y值。
main()
{int x,y;
scanf("%d",&x);
If(x<0)y=2*x+1;
If(x>0)y=2*x-1;
If(x==0) y=0;
printf(“%d”,y);}
4、编写一个程序,从4个整数中找出最小的数,并显示此数。
main( )
{int a,b,c,d,t;
scanf ("%d,%d,%d,%d",&a,&b,&c,&d);
if (a>b)
{t=a; a=b; b=t;}
if (a>c)
{t=a; a=c; c=t;}
if (a>d)
{t=a; a=d; d=t;}
printf ("min = %d \n",a);
}
5.有一函数当x<0时y=1,当x>0时,y=3,当x=0时y=5,编程,从键盘输入一个x值,输出y值。
main()
{int x,y;
scanf("%d",&x);
if (x<0) y=1;
else if(x==0) y=5;
else y=3;
printf("x=%d,y=%d\n",x,y);}
6.从键盘输入两个数,求出其最大值(要求使用函数完成求最大值,并在主函数中调用该函数)
main()
{float max(float x,float y);
float a,b,m;
scanf("%f,%f",&a,&b);
m=max(a,b);
printf("Max is %f\n",m);
}
float max(float x,float y)
{
float temp;
if (x<y)
{temp=x;
x=y;
y=temp;
}
return(x);
}
7、从键盘输入你和你朋友的年龄,编成判断谁的年龄最大,并打印最大者的年龄。
#include <stdio.h>
main()
{ int yourAge, hisAge;
printf("Please enter your age:");
scanf("%d", &yourAge); /*输入你的年龄yourAge*/
printf("Please enter your friend's age:");
scanf("%d", &hisAge); /*输入你朋友的年龄hisAge*/
if (yourAge >= hisAge)
{
printf("You are older! Your age is = %d\n", yourAge);
}
if (hisAge > yourAge)
{
printf("Your friend is older! HisAge age is = %d\n", hisAge);
}}
8、键盘输入2个加数,再输入答案,如果正确,显示“right”,否则显示“error”
#include “stdio.h”
main( )
{int a,b,c;
printf(“please input a and b\n”);
scanf (%d,%d”,&a,&b);
printf(“please input the answer for a+b\n”);
scanf (%d”,&c);
if (c==a+b)
printf(“right\n”);
else
printf(“error\n”);
}
9. 编一程序每个月根据每个月上网时间计算上网费用,计算方法如下:
要求当输入每月上网小时数,显示该月总的上网费用(6分)
main()
{ int hour;
float fee;
printf(“please input hour:\n”);
scanf(“%d”,&hour);
if(hour<=10)
fee=30;
else if(hour>=10&&hour<=50)
fee=3*hour;
else fee=hour*2.5;
printf(“The total fee is %f”,fee);
}
10.神州行用户无月租费,话费每分钟0.6元,全球通用户月租费50元,话费每分钟0. 4元。输入一个月的通话时间,分别计算出两种方式的费用,判断哪一种合适。
main()
{float a,x,y;
printf(“\n请输入您的话费:”);
scanf(“%f,”,&a);
x= 0.6*a;
y=50+0.4*a;
printf (“神州行话费为: %f\n”,x);
printf (“全球通话费为: %f\n”,y);
if (x>=y)
printf(“建议使用全球通”);
else printf(“建议使用神州行);
}
11.个人所得税计算,应纳税款的计算公式如下:
收入 |
税率 |
收入<=1000元部分 |
0% |
2000元>=收入>1000元的部分 |
5% |
3000元>=收入>2000元的部分 |
10% |
6000元>=收入>3000元的部分 |
15% |
收入>6000元的部分 |
20% |
输入某人的收入,计算出应纳税额及实际得到的报酬。(7分)
(如需连续计算多个人的纳税情况,直到输入负数为止,程序应如何改进?试写出程序)
#include “stdio.h”
main()
{
int grade;
float income,tax,money;
printf(“please input your income\n”);
scanf (“%f”,&income);
if (income<0)
printf(“the input is error”);
else
{ grade=(int)income/1000;
switch(grade)
{ case 0 : tax=0;break;
case 1 : tax=(income-1000)*0.05;break;
case 2 : tax=50+(income-2000)*0.1;break;
case 3 :
case 4 :
case 5 : tax=150+(income-3000)*0.15;break;
default: tax=600+(income-6000)*0.2;
}
money=income-tax;
printf(“\n tax=%f, money=%f”,tax, money);
}
}
12.从键盘上输入一个百分制成绩score,按下列原则输出其等级:score≥90,等级为A;80≤score<90,等级为B;70≤score<80,等级为C;60≤score<70,等级为D;score<60,等级为E。
#include <stdio.h>
main()
{
int data;
char grade;
printf("Please enter the score:");
scanf("%d”, &data);
switch(data/10)
{ case 10:
case 9 : grade=’A’; break;
case 8: grade=’B’; break;
case 7: grade=’C’; break;
case 6: grade=’D’; break;
default: grade=’E’;
}
printf("the grade is %c”,grade);
}
*13. 编程设计一个简单的计算器程序。从键盘输入2个操作数,1个运算符,当运算符为加(+)、减(-)、乘(*)、除(/)时,输出计算结果
#include <stdio.h>
main()
{ int data1, data2; /*定义两个操作符*/
char op; /*定义运算符*/
printf("Please enter the expression:");
scanf("%d%c%d", &data1, &op, &data2); /*输入运算表达式*/
switch(op) /*根据输入的运算符确定要执行的运算*/
{ case '+': /*处理加法*/
printf("%d + %d = %d \n", data1, data2, data1 + data2);
break;
case '-': /*处理减法*/
printf("%d - %d = %d \n", data1, data2, data1 - data2);
break;
case '*': /*处理乘法*/
printf("%d * %d = %d \n", data1, data2, data1 * data2);
break;
case '/': /*处理除法*/
if (0 == data2) /*为避免出现溢出错误,检验除数是否为0*/
printf("Division by zero!\n");
else
printf("%d / %d = %d \n", data1, data2, data1 / data2);
break;
default:
printf("Unknown operator! \n");
}
}
14. 从键盘输入10个整数,统计其中正数、负数和零的个数,并在屏幕上输出。
main( )
{int a[10], i,p=0,n=0,z=0;
printf(“please input number”);
for(i=0;i<10;i++)
{scanf(“%d,”,&a[i]);
if (a[i]>0)
p++;
else if (a[i]<0)
n++;
else z++}
printf(“正数:%5d, 负数:%5d,零:%5d\n”,p,n,z);
}
}
15、编程序实现求1-200之间的所有数的乘积并输出。
#include <stdio.h>
main( )
{ int i, sum=1
for(i=1; i<200 i=i+1)
sum=sum*i;
printf(“the sum of odd is :%d”,sum);
}
16. 从键盘上输入10个数,求其平均值。
main()
{
int a[10],i,s=0;
float ave;;
for(i=0;i<10;i++)
scanf(“%d”,&a[i]);
for(i=0;i<10;i++)
sum+=a[i];
ave=(float)sum/10;
printf("ave = %f\n", ave);
}
17、编程序实现求1-1000之间的所有奇数的和并输出。
#include <stdio.h>
main( )
{ int i, sum=0;
for(i=1; i<1000; i=i+2)
sum=sum+i;
printf(“the sum of odd is :%d”,sum);
}
18.有一个分数序列:2/1,3/2,5/3,8/5,13/8,21/13……
编程求这个序列的前20项之和。
main()
{
int i,t,n=20;
float a=2,b=1,s=0;
for(i=1;i<=n;i++)
{s=s+a/b;
t=a;
a=a+b;
b=t;
}
printf("sum=%9.6f",s);
}
19. 用数组实现以下功能:输入5个学生成绩,而后求出这些成绩的平均值并显示出来。
main()
{float a[5],i;
float s=0;
for(i=0;i<5;i++)
scanf(“%f”,&a[i]);
for(i=0;i<5;I++)
s=s+a[i];
printf(“result=%f”,s/5);
}
*20、用循环的方法构造一个5行5列的二维数组,使主对角线上的变量为1,其它为0,并将数组中所有项按行按列显示出来。
main()
{int a[5][5],i,j, s=0;
for(i=0;I<5;i++)
for(j=0;j<5;j++)
if(i= =j) a[i][j]=1;
else a[i][j]=0;
for(i=0;i<5;i++)
for(j=0;j<5;j++)
{if(j= =0) printf(“\n”);
printf(“%d ”, a[i][j]);
}
}
21.求一个3×3矩阵对角线元素之和。从键盘输入矩阵元素的值并输出和的值.
main()
{ int a[3][3],sum=0;
int i,j;
printf("Enter data:\n");
for(i=0;i<3;i++)
for(j=0;j<3;j++)
scanf("%d",&a[i][j]);
for(i=0;i<3;i++)
sum=sum+a[i][i];
printf("sum=%d",sum);
}
22.输入n的值,n代表行数,输出如图所示的图形。(6分)
*
* * *
* * * * *
* * * * * * * (此图为n=4时的输出结果)
#include <stdio.h>
main()
{int i , j , k;
for (i = 1; i <= 4; i++) /*控制行数*/
{ for (k = 1; k <= (2 * i - 1); k++) /*控制每行输出的*号个数*/
{ printf("*"); }
printf("\n"); }} /*输出一行后换行*/
23、从键盘输入30名学生的成绩数据,求其中的最高分、最低分和平均分。
(提示:用数组存放成绩数据)
#include<stdio.h>
#define M 30
main ( )
{ float score[M], max , min, aver;
int i ;
printf(“please input score: \n”);
for(i=0; i<M ; i++)
scanf(“%f”, &score[i]);
max=score[0];
min=score[0];
aver=score[0];
for(i=1; i<M; i++)
{ if (max < score[i]) max= score[i];
if (min>score[i]) min=score[i];
aver+=score[i];
}
printf(“max=%f, min=%f,aver=%f”, max, min, aver/M);
}
24. 从键盘输入某班学生某门课的成绩及其学号(班级人数最多40人,具体人数由键盘输入),输出该班最高分和最低分及其学生学号;并输出该班该课程的总分和平均分。请编写程序。
#include <stdio.h>
#define ARR_SIZE 40
main()
{ float score[ARR_SIZE], maxScore,minScore,sum;
int n, i;
long maxNum, minNum,num[ARR_SIZE];
printf("Please enter total number:");
scanf("%d", &n);
printf("Please enter the number and score:\n");
for (i=0; i<n; i++)
scanf("%ld%f", &num[i], &score[i]);
maxScore = score[0];minScore= score[0];
maxNum = num[0]; minNum= num[0];
sum=score[0];
for (i=1; i<n; i++)
{ if (score[i] > maxScore)
{ maxScore = score[i];
maxNum = num[i];
}
else if (score[i] < minScore)
{ minScore = score[i];
minNum = num[i];
}
sum=sum+score[i];
}
printf("maxScore = %.0f, maxNum = %ld\n", maxScore, maxNum);
printf("minScore = %.0f, minNum = %ld\n", minScore, minNum);
printf("sum = %.1f, average = %.1f\n", sum, sum/n);
}
*25.将一个有5个元素的数组中的值(整数)按逆序重新存放。
例: 原来顺序为:8、6、5、4、1,要求改为1、4、5、6、8
define N 5
main()
{int a[N],I,temp;
printf(“enter array a:\n”);
for(I=0;I<N;I++)
scanf(“%d”,$a[i]);
for(I=0;I<N;I++)
{ temp=a[i];
a[i]=a[N-I-1];
a[N-I-1]=temp;
}
printf(“\n Now, array a:\n”);
for(I=0;I<N;I++)
printf(“%4d”,a[i]);
printf(“\n”);
}
*26.从键盘上输入一个2*3的矩阵,将其转置后形成3*2的矩阵输出。
main()
{int a[2][3], b[3][2],i,j;
for(i=0;i<2;i++)
for(j=0;j<3;j++)
scanf(“%d”,&a[i][j]);
for(i=0;i<3;i++)
for(j=0;j<2;j++)
b[i][j]=a[j][i];
for(i=0;i<3;i++)
{for(j=0;j<2;j++)
printf("%5d",b[i][j]);
printf("\n”);
}
}
*27.编写两个函数分别求两个整数的最小公倍数和最大公约数,用主函数调用这两个函数并输出结果。两个整数由键盘输入。
#include "stdio.h"
mingb(x,y)
int x,y;
{int z,i,t;
z=1;
i=1;
if(x>y)
{t=x;x=y;y=t;}
while(z<=x*y)
{
z=i*y;
if((z%x==0)&&(z%y==0)) break;
i++;
}
return(z);
}
maxgy(x,y)
int x,y;
{int z,t;
if(x>y)
{t=x;x=y;y=t;}
z=x;
while(z>1)
{ if((x%z==0)&&(y%z==0)) break;
z--;
}
return(z);
}
main()
{
int a,b,c;
char ch;
printf("\nmingb(1)/maxgy(2)?");
ch=getchar();
printf("\ninput:");
scanf("%d,%d",&a,&b);
if(ch=='1') c=mingb(a,b);
else if(ch='2') c=maxgy(a,b);
printf("the result is %d",c);
getch();
}
*28. 输入一个3*3矩阵,求出其转置矩阵,并求出两个矩阵的和.
main()
{
int a[3][3];
int b[3][3];
int c[3][3]
int i,j;
printf(“please input 6 numbers!”)
for (i=1;i<3;i++)
for(j=1;j<3;j++)
{
scanf(“%d”,&a[i][j]);
b[j][i]=a[i][j];
}
for (i=1;i<3;i++)
for(j=1;j<3;j++)
{
c[i][j]=a[i][j]+b[i][j];
}
for (i=1;i<3;i++)
for(j=1;j<3;j++)
{
printf(“%d”,a[i][j]);
}
}
29、从键盘输入10名学生的成绩数据,按成绩从高到低的顺序排列并输出。(提示:用数组存放成绩数据)
main()
{ int a[10];
int i,j,temp;
printf("input score:\n");
for(i=0;i<10;i++)
scanf("%d",&a[i]);
printf("\n");
for(i=1;i<10;i++)
for(j=0;j<9;j++)
if(a[j]<a[j+1])
{temp=a[j];
a[j]=a[j+1];
a[j+1]=temp;
}
for(i=0;i<10;i++)
printf("%d,",a[i]);
}
30. 定义一个5行3列的数组,从键盘输入各数组元素的值,计算各数组元素之和。
#include <stdio.h>
main( )
{ int i, j ,a[5][3];
printf(“Enter data:\n”);
for(i=0;i<5;i++)
for(j=0;j<3;j++)
scanf(“%d”,&a[i][j]);
for(i=0;i<5;i++)
for(j=0;j<3;j++)
sum=sum+a[i][j];
printf(“sum=%5d\n”,sum);
}
31、编写程序,交换两个数组中的对应元素。
#include<stdio.h>
#define N 20
main( )
{ int a[N], b[N], i, j, temp;
printf(“please input a:\n”);
for(i=0; i<N; i++)
scanf(“%d”, &a[i]);
printf(“please input b:\n”);
for(j=0; j<N; j++)
scanf(“%d”, &b[i]);
for(i=0; i<N; i++)
{ temp=a[i];
a[i]=b[i];
b[i]=temp;
}
for(j=0; j<N; j++)
printf(“%d,”, a[j]);
printf(“\n”);
for(j=0; j<N; j++)
printf(“%d,”,b[j] );
}
*32、从键盘上输入一个4*3的整型数组,找出数组中的最小值及其在数组中的下标。
#include <stdio.h>
main()
{ int a[4][3], i , j ,min,m,n;
printf("Please enter data:");
for (i=0; i<4; i++)
for (j=0; j<3; j++)
scanf(“%d”,& a[i][j]);
min=a[0][0];
m=0; n=0;
for (i=0; i<4; i++)
for (j=0; j<3; j++)
if (a[i][j]<min)
{min= a[i][j];
m=i;
n=j;
}
printf("the min is %d\n, min);
printf("posion is %d %d \n, m,n);
}
33.编程实现如下功能:从键盘输入一行字符,统计其中大写英文字符,小写英文字符和其他字符的个数。
#include <stdio.h>
#include <string.h>
#define ARR_SIZE 80
main()
{
char str[ARR_SIZE];
int len, i, letter = 0, digit = 0, space = 0, others = 0;
printf("Please input a string:");
gets(str);
len = strlen(str);
for (i=0; i<len; i++)
{ if (str[i] >= 'a' && str[i] <= 'z' || str[i] >= 'A' && str[i] <= 'Z')
letter ++; /*统计英文字符*/
else if (str[i] >= '0' && str[i] <= '9' )
digit ++; /*统计数字字符*/
else
others ++; /*统计其它字符的个数*/
}
printf("English character: %d\n", letter);
printf("digit character: %d\n", digit);
printf("other character: %d\n", others);
}
*34.编程实现如下功能:
1)在主函数中,实现从键盘输入10名学生某门课的成绩,保存在一维数组中;调用排序函数;对排序后的数组中的元素按从高到低打印输出。
2)编写排序函数,使用数组名做函数参数,实现对该成绩的排序。
#include <stdio.h>
#define ARR_SIZE 40
void Sort(float score[], long num[], int n);
main()
{ float score[ARR_SIZE];
int n, i;
long num[ARR_SIZE];
printf("Please enter total number:");
scanf("%d", &n);
printf("Please enter the number and score:\n");
for (i=0; i<n; i++)
{
scanf("%ld%f",&num[i],&score[i]);
}
Sort(score, num, n);
printf("Sorted results:\n");
for (i=0;i<n;i++)
{ printf("%ld\t%4.0f\n",num[i],score[i]);
}
}
void Sort(float score[], long num[], int n)
{ int i, j;
float temp1;
long temp2;
for (i=0; i<n-1; i++)
{ for (j=i+1; j<n; j++)
{ if (score[j] > score[i])
{ temp1 = score[j];
score[j] = score[i];
score[i] = temp1;
/*交换学号*/
temp2 = num[j];
num[j] = num[i];
num[i] = temp2;
}
}
}
}
*35.编程实现如下功能:
实现从键盘输入两个字符串,分别存入两个不同的字符数组中;将两个字符串连接为一个字符串,并打印输出连接后的整个字符。
#include <stdio.h>
#include <string.h>
#define ARR_SIZE 80
void MyStrcat(char dstStr[], char srcStr[]);
main()
{ char s[ARR_SIZE], t[ARR_SIZE];
printf("Please enter source string: ");
gets(s);
printf("Please enter destination string: ");
gets(t);
MyStrcat(s,t);
printf("The concatenate string is: ");
puts(s);
}
void MyStrcat(char dstStr[], char srcStr[])
{ int i = 0, j;
while (dstStr[i] != '\0') {
i++;
}
for (j=0; srcStr[j]!='\0'; j++, i++)
{
dstStr[i] = srcStr[j];
}
dstStr[i] = '\0';
}
*36、猜数游戏。系统随机产生一个整数,通过键盘输入数据猜数,猜对为止,并要求统计猜的次数。
注:rand()函数可以产生0~32767间的正整数,程序中需包含stdlib.h。
#include <stdio.h>
#include <stdlib.h>
main()
{
int magic;
int guess;
int counter;
magic = rand() % 100 + 1;
counter = 0;
do{
printf("Please guess a magic number:");
scanf("%d", &guess);
counter ++;
if (guess > magic)
printf("Wrong!Too high!\n");
else if (guess < magic)
printf("Wrong!Too low!\n");
}while (guess != magic);
printf("Right!\n");
printf("counter = %d\n", counter);
}
37.输入两个整数,利用指针变量作为函数参数,编程实现两数互换功能,并将交换后的数据重新输出。
#include <stdio.h>
void Swap(int *x, int *y);
main()
{ int a, b;
printf("Please enter a,b:");
scanf("%d,%d", &a, &b);
printf("Before swap: a = %d,b = %d\n", a,b);
Swap(&a, &b);
printf("After swap: a = %d,b = %d\n", a, b);
}
void Swap(int *x, int *y)
{
int temp;
temp = *x;
*x = *y;
*y = temp; }
38.随机输入若干个学生的体重,以输入负数或零结束,分别求最重和最轻的体重,并计算平均体重。
#include <stdio.h>
main()
{ int n=0;
float weight,max=0,min=10,sum=0,ave;
printf(“please input the weight:”);
scanf(“%f”,& weight);
while(weight>0)
{ sum=weight+sum;
n++;
if (weight<min)
min=weight;
else if(weight>max)
max=weight;
scanf(“%f”,& weight);}
if (n>0)
{ ave=sum/n;
printf("maxweight = %f\n " , max);
printf("minweight = %f\n", min);
printf("ave = %f\n",ave);
else printf("NO VALID DATA”);
}
39.输入m,k的值,编程求下面表达式的值:(要求编写一个求阶乘的函数,调用函数实现本题)
#include <stdio.h>
unsigned long Factorial(unsigned int number);
main()
{ unsigned int m, k;
double p;
printf("Please input m, k:");
scanf("%u, %u", &m, &k);
p = (double)Factorial(k) / Factorial (m-k);
printf("p=%f\n", p);
}
unsigned long Factorial(unsigned int number)
{ unsigned long i, result = 1;
for (i=2; i<=number; i++)
result *= i;
return result;
}
*40. 编写程序,其中自定义一函数,用来判断一个整数是否为素数,主函数输入一个数,输出是否为素数。
#include <math.h>
int IsPrimeNumber(int number)
{ int i;
if (number <= 1)
return 0;
for (i=2; i<sqrt(number); i++)
{ if ((number % i) == 0)
return 0; }
return 1;}
main()
{ int n;
printf(“Please input n:”);
scanf(“%d”,&n);
if(IsPrimeNumber(n))
printf(“\n%d is a Prime Number”,n);
else printf(“\n%d is not a Prime Number”,n);}
下载:https://download.csdn.net/download/edogawa_konan/10415376