access口配置:
在已确定vlan划分的情况下,根据端口号进行access配置。配置命令如下:
Interface Ethernet 0/0/_
Port link-type access
Port default vlan
链路聚合:
Interface eth-trunk
bpdu enable
mode lacp-static
port link-type trunk
port trunk allow-pass vlan all
int e 0/0/_
eth-trunk
int e 0/0/_
eth-trunk
trunk口配置:
Interface g 0/0/_
Port link-type trunk
Port trunk allow-pass vlan all
网关配置:
Interface vlanif _
Ip address
生成树协议stp配置:
stp enable
stp mode stp
stp root primary
undo stp root
stp priority 8192
stp enable
stp mode stp
stp root secondery
undo stp root
stp prioity 4096